What is the purpose of opposite sideband nulling with the PX3?
I was able to do every band except 50Mhz.
On 50 I was not able to get any change at all. The other bands nulled fine.
Is there a factory setting I can use on 50Mhz?
Tnx,
Mal WA2TWA
--
Sent from: http://elecraft.365791.n2.nabble.com/
Hi Ken,
First make sure the cables between the PX3 and the KX3 are firmly plugged in
on both the KX3 and PX3 sides. Pay attention to the I/Q 2.5mm cable.
During adjustment, move the encoder slowly, the adjustment values are
usually small.
If you're still having trouble, please contact Elecraf
In a word: I can’t. OK, that’s two words.
I have followed the procedure and am using the PX3s calibration signal as the
signal source. I have recorded the initial Amplitude and Phase settings. I
can see the two sideband peaks on the display and watch them move closer and
further from the ce
3 matches
Mail list logo