Re: [Elecraft] Problems with K3 Calibration

Hi Todd, 3. I also have discovered that toroid L18 on the KBPF3 had a lead broken during shipment. It seems I've heard of this happening before to someone else. Can a turn on the toroid be sacrificed to allow enough length of the lead to solder it back in the board? I highly doubt

[Elecraft] Problems with K3 Calibration

I am currently at the calibration stage of assembly. 1. In trying to do the reference oscillator calibration(I have the 1ppm TCXO) (using method 3) I can get into the CONFIG:REF CAL menu entry, but when I tap 1 I can't get to REF xxC. Tapping 1 seems to change the mode from CW to AM, the AGC

Re: [Elecraft] Problems with K3 Calibration

Todd J Gahagan wrote: 1. In trying to do the reference oscillator calibration(I have the 1ppm TCXO) (using method 3) I can get into the CONFIG:REF CAL menu entry, but when I tap 1 I can't get to REF xxC. Tapping 1 seems to change the mode from CW to AM, the AGC speed, turns on the VOX, and

Re: [Elecraft] Problems with K3 Calibration

thanks Vic, I suspected that was the case. Now on to the other problem. Todd - Original Message - From: Vic K2VCO [EMAIL PROTECTED] To: Todd J Gahagan [EMAIL PROTECTED] Cc: Elecraft List Elecraft@mailman.qth.net Sent: Tuesday, April 15, 2008 8:54 PM Subject: Re: [Elecraft] Problems