Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-19 Thread Keith Trinity WE6R
One thing to remember, when you change the spkr+ph yes/no there is a DELAY (in one direction) for several seconds as this is a soft-switch to the BRAIN. So wait a bit when you test this! Also, Try the PH.R + -- in the other setting and then test the above again, waiting for the delay. **In

Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-17 Thread N4ZR
he effect. - 73 and good DX de Mike, K6MKF, NCDXC Secretary -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Chuck Chandler Sent: Sunday, May 17, 2020 11:55 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-17 Thread Jim H via Elecraft
My K3 in the 2800 sn range had intermittent internal speaker. I eventually found the pins on the audio card had poor solder connections. The plug and wire from the speaker were OK. Never had further problems. Jim H K7SSS In a message dated 5/17/2020 12:08:51 PM Pacific Standard Time,

Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-17 Thread Mike Flowers
t-boun...@mailman.qth.net > On Behalf Of Chuck Chandler > Sent: Sunday, May 17, 2020 11:55 > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Prolly a dumb mistake... no internal speaker output > > I tried setting SPKRS = 1 with no change. > > I plugged

Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-17 Thread Dick Dievendorff
Perhaps the internal speaker has become unplugged? Dick, K6KR > On May 17, 2020, at 11:57, Chuck Chandler wrote: > > I tried setting SPKRS = 1 with no change. > > I plugged the two external speakers back in, and they are working normally. > > >> On Sun, May 17, 2020 at 1:09 PM Ron Manfredi

Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-17 Thread Chuck Chandler
I tried setting SPKRS = 1 with no change. I plugged the two external speakers back in, and they are working normally. On Sun, May 17, 2020 at 1:09 PM Ron Manfredi wrote: > Try the default for speakers; set it to "1"? > > Ron WA2EIO > > > > On 5/17/2020 2:00 PM, Chuck Chandler wrote: > > We

Re: [Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-17 Thread Ron Manfredi
Try the default for speakers; set it to "1"? Ron  WA2EIO On 5/17/2020 2:00 PM, Chuck Chandler wrote: We are in the process of packing to move and I have to down-size the mess on my operating desk. As part of that the K3S was moved back and forth, and I removed the two external speakers I

[Elecraft] Prolly a dumb mistake... no internal speaker output

2020-05-17 Thread Chuck Chandler
We are in the process of packing to move and I have to down-size the mess on my operating desk. As part of that the K3S was moved back and forth, and I removed the two external speakers I had been using. Now that I've done that I get no audio when the headphones are unplugged from the front