There is a PTT RCA jack on rear panel.
Sent from my iPhone
...nr4c. bill
> On Jun 19, 2017, at 12:11 PM, Nolan Kienitz wrote:
>
> Dave,
>
> Do you also use the PTT button that Heil has for the Pro Set units? I need to
> dig into how to make that happen using the rear
Plug the mike and phones into the respective jacks as marked on the rear
and the foot switch into the PTT IN connector. The MENU under MIKE SEL
will need to be changed as discussed earlier.
Personally, as fantastic as the VOX works, I really enjoy using that
feature. Of course using VOX
Dave,
Do you also use the PTT button that Heil has for the Pro Set units? I need to
dig into how to make that happen using the rear jacks.
I would like to clean up from front panel as well.
73,
Nolan Kienitz - KI5IO
__
I use this configuration, headset with mike {Koss SB 40} and a separate
desk boom and mike {PR781} along with a pair of external speakers. It
is easy to switch between the two mikes with just a change from rP {SB
40} to fP {PR 781} via the menu. In both cases, I find mike gain
selection
Yes. Remove all Heil adapters. Connect Pro Set directly to rear panel
1/8" MIC and PHONES jacks.
Tap MENU.
Rotate VFO B knob until you see MAIN:MIC SEL.
Use MAIN:MIC SEL to select rP (rear panel) mic. by rotating VFO A knob.
Tap 1 to select Lo or Hi mic gain, whichever works best.
Tap 2 to
I have a Heil Pro Set Elite 6 with a 1/4 phone plug and 1/8 mic plug but when I
looked closer at the 1/4 plug I realized that it is an adapter! The phone plug
really is 1/8 plug that plugged into the adapter. It is not noticeable until I
tugged on it slightly and it come apart. Then I looked
Jim, I and several of my friends have various models of the Pro Set, and
every one I've seen had the 1/8 inch plugs for both mic and phones, but
perhaps some models are different. Mine has an adapter for the phones to
convert to 1/4 inch when needed- it's low profile and adds very little
length to
Hmm, mine has a 1/4 inch stereo plug for phones.
On Sun, Jun 18, 2017 at 8:39 PM, Dave Fugleberg wrote:
> The Heil pro sets have a 1/8 inch stereo plug for the phones and a1/8
> inch mono plug for the mic. Those will plug right into the back of the K3
> without an
If you want to use the front jack you will need the Kenwood adaptor. I
assume that it is an IC model so you will need to turn on the bias.
John KK9A
K5MP said:
Sun Jun 18 20:55:26 EDT 2017
I am soon to be the owner of a used K3. I presently use a Heil Pro Set
Elite
boom mic for my IC-7600
The Heil pro sets have a 1/8 inch stereo plug for the phones and a1/8
inch mono plug for the mic. Those will plug right into the back of the K3
without an adapter. If you prefer using the front panel mic connector,
you'll need the Heil AD-1-K adapter.
In either case, don't forget to set the menu
I am soon to be the owner of a used K3. I presently use a Heil Pro Set Elite
boom mic for my IC-7600 and want to know if anyone here has used this mic on
a K3, and if so, what adapter did you use to connect to the round 8-pin mic
input on the K3? I'd like to hear your ideas. Thanks
Mike, K5MP
11 matches
Mail list logo