Re: [Elecraft] WTB - KX2

Skip: Hope they catch and hang the thieves. Ed McCann AG6CX > On May 22, 2024, at 11:19 AM, skazma...@mindspring.com wrote: > > Someone broke into my truck and stole my pack with my KX2, N3ZN key, > antennas, and a whole bunch of other stuff. Grrr . My wife and I are leaving > on a trip of a

[Elecraft] WTB - KX2

Someone broke into my truck and stole my pack with my KX2, N3ZN key, antennas, and a whole bunch of other stuff. Grrr . My wife and I are leaving on a trip of a lifetime this summer, going to Arches, Canyonlands, Grand Teton, Yellowstone, and Glacier National Parks and doing two weeks in Banff and

[Elecraft] [WTB] T1 Antenna Tuner

Hello, I’m looking for a working T1 ATU Antenna Tuner. Thank you! Tom KI5YGT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] WTB Clean SP3 Speaker for K3s

Looking for an SP3 speaker to match my K3s. If you have one available, send confirming images & asking price to my email address “w...@hotmail.com” 73, Doug W5JV Sent from my iPhone On Mar 8, 2024, at 4:34 PM, Doug Hensley wrote:  Looking for a new condition MH4 mic. Have a nice unused

[Elecraft] [WTB] KXPD3_KX3

Hi folks, I'm thinking about the KXPD3_KX3 for my KX3 radio for fair price please. Best from EU due to high import fee from outside EU. Thanks for offers if any... 73 - Petr, OK1RP http://ok1rp.blogspot.com K3 #0778 | K2 # 4800 | K1 #1031 | KX3 # 0602

[Elecraft] WTB K60XV

Looking for a K60XV kit for my K2/100. I know it’s a hard to find item, but you never find out if you don’t ask… 73, John K2ZA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB: K2 Frequency Counter Probe

Hello, I misplaced mine a while ago and want to buy one if you have an extra or don't need it. Please reply with the price shipped to 02038. Many thanks, Chris KM1B __ Elecraft mailing list Home:

[Elecraft] WTB: K2 Frequency Counter Probe

Hello, I misplaced mine a while ago and want to buy one if you have an extra or don't need it. Many thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB

WTB K3 KAT3 board used. ni8nj...@gmail.com Jack, NI8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] WTB: Elecraft K1 Tilt Stand

I just redesigned one I made for 3D printing. It's very close to the original. OK, closer to a blatant knockoff. The only real difference is that the design was changed to accommodate the different characteristics of 3D printing vs using the original aluminum stock. If Elecraft has no

[Elecraft] WTB: Elecraft K1 Tilt Stand

A long-shot I know, but I'm looking for a KTS1 wide-range tilt stand for an Elecraft K1. Will probably have to find some aftermarket substitute, but thought I'd ask for the real thing first. Thanks! --  Jeff, KE9V __ Elecraft mailing

[Elecraft] WTB: T1 ATU

Looking to pick up a T1 tuner for my QRP rigs. wildfire_brim...@squidanddagger.com v/r, -chris K4KCW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] WTB/trade for K3(S) CW filters

Maybe you can work a deal with K6RO, who has a sideline business dealing in used Elecraft radios and accessories. Dave Hachadorian, K6LL Big Bear Lake, CA On 8/1/2023 10:09 PM, AB2E Darrell wrote: Hi all, Just picked up a K3 w/upgraded S synths, but the op was mostly SSB. I want to pick up

[Elecraft] WTB/trade for K3(S) CW filters

Hi all, Just picked up a K3 w/upgraded S synths, but the op was mostly SSB. I want to pick up some CW filters, preferably matched pairs for main & sub. 500/400/200. Here is the current lineup. Main receiver roofing filters 13 kHz, 6 kHz, 2.70 kHz matched pair, 1.8 kHz, 1.50 kHz Subreceiver

[Elecraft] wtb SP4

Hi All, Bought a nearly new K4D a few months back without a speaker, now Elecraft has them backordered. Anyone have a spare, or one they would be willing to sell>? Contact me offlist a...@comcast.net Thanks and 73, Darrell AB2E __

[Elecraft] WTB: P3 with SVGA

Looking for a nice Elecraft P3 with SVGA card and all included accessories. Please send me an email direct with what you have and asking price. Vy 73 de Shane KI4M __ Elecraft mailing list Home:

Re: [Elecraft] WTB K3-K3S 200hz Or 250hz Filter.

>Looking For 200hz Or 250hz Filter For K3-K3S. > >Ray WD4X Inrad sells them. They made the OEM filters. https://www.inrad.net/home.php?cat=140 Gary NA6O __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] WTB K3-K3S 200hz Or 250hz Filter.

Try K6RO.  He deals in used Elecraft radios and has many filters available. Dave Hachadorian, K6LL Yuma, AZ On 4/23/2023 4:05 AM, Ramon Batista wrote: Looking For 200hz Or 250hz Filter For K3-K3S. Ray WD4X 239-227-9414 __ Elecraft

[Elecraft] WTB K3-K3S 200hz Or 250hz Filter.

Looking For 200hz Or 250hz Filter For K3-K3S. Ray WD4X 239-227-9414 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] WTB K2 KDSP2 DSP

I’m wanting to buy a KDSP2 DSP unassembled kit or assembled working unit. Please contact me if you have a kit or unit available. 73//k5mm/ron __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB K2 Complete Kit Or A Built One

Hi, I’m Looking For An Elecraft K2 Complete Kit Or One 100% Working. Ray WD4X 239-227-9414 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] WTB KPA 100, DSP

I have a k2 in dire need of the KPA 100 and DSP real time clock. If you have either for sale, please e-mail me @ kb2...@hotmail.com Thanks for reading. 73, take care and GOD Bless Steve kb2tvi Get Outlook for iOS

[Elecraft] WTB: QRP cover for K2

Hi all - I'm converting my K2/100 back to a K2/10 and need the original cover. I've got one coming but it might be a long wait. If anyone has one available let me know. Thanks & 73, -Andrew NV1B .. __ Elecraft mailing list Home:

[Elecraft] WTB: KAT100

Hi. I am looking to buy a nice KAT100 for my K2. If you have one please contact me off list. Thank you. Frank, W4FMS w4...@aol.com Sent via iPhone by AT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] WTB KIO2

Would anyone out there have a KIO2 Aux I/O Adapter for the K2, excess to their needs, that they would like to part with? It’d be even better if is was already assembled. ;-) If so, contact me off list… :-) 73, Dave - N5DCH __

Re: [Elecraft] WTB: K4

I knew you could do it!!! I thought about doing the same thing, I'm afraid the K3 and the spares will have to do, for now at least... 來 To the naysayers 73 Dean K2WW On Wed, Jun 29, 2022, 8:16 PM Alan D. Wilcox wrote: > Mission accomplished ... I just unpacked and installed my new K4D > beside

Re: [Elecraft] WTB: K4

Mission accomplished ... I just unpacked and installed my new K4D beside the K2 and K3. Many thanks to all for the help and encouragement. Alan Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955) 570-916-9590 (cell, text) On 6/20/22 16:36, Alan D. Wilcox wrote: Hello, Considering adding a K4

Re: [Elecraft] WTB: K4

plating the > > same thing. > > > > If you find a K4 used, it will be a miracle. > > > > Dr. William J. Schmidt - K9HZ J68HZ > > > > email: b...@wjschmidt.com > > > > > > -Original Message- > > From: elecraft-boun...@mailman.

Re: [Elecraft] WTB: K4

r. William J. Schmidt - K9HZ J68HZ email:  b...@wjschmidt.com -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Jim Brown Sent: Monday, June 20, 2022 4:31 PM To: elecraft@mailman.qth.net Subject: [POSSIBLE SPAM] Re: [Elecraft] WTB: K4 I seriously doubt that anyone

Re: [Elecraft] WTB: K4

Very true, but worth asking. That is exactly how I managed to get my K4D #636 last month. The one I had on order was scheduled for a Nov-Dec delivery and one came up for sale here on the reflector. It took me about 2 microseconds to reply and claim it. Glad I did - it is a pleasure to use. And

Re: [Elecraft] WTB: K4

I seriously doubt that anyone will part with one unless they're in money trouble or giving up ham radio. I've got one on order, but in the last few days, but I've been playing with one that a friend loaned me while he's on vacation. Saturday night, I made about 250 QSOs in a little less than

[Elecraft] WTB: K4

Hello, Considering adding a K4 to my shack, but not keen on the Elecraft expected-delivery time. Write or text me if you have one for me. Thanks, Alan Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955) 570-916-9590 (cell, text) https://WilcoxEngineering.com

[Elecraft] WTB Elecraft T1

Anyone have an Elecraft T1 Auto Tuner they are looking to sell? Let me know what you have and how much shipped to 49009, Kalamazoo Michigan. Thanks. Larry, KN8N Kalamazoo, Michigan __ Elecraft mailing list Home:

[Elecraft] WTB. Elecraft K3/0-Mini

Looking for a K3/0-Mini…. Tnx Rick WA3MKT Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] WTB K2

Looking for a K2. Prefer working but will consider a "parts" radio. Please contact me off list. Thanks, -Andrew / NV1B .. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB: T1 Tuner

Curious if anyone might have a good condition T1 that they might be willing to part with for a reasonable price (i.e., < $150/shipped)? I just had a bit of sticker shock looking at what it might cost to replace the one I’d sold about a year ago. Mercifully, I’m not currently in the market for

Re: [Elecraft] WTB: KXV3 Or KXV3A I/O Interface For K3

I would like to clarify that I am looking for the KXV3 or KXV3A transverter board option for the K3.  My earlier post was not very clear  73 Randy w...@aol.com In a message dated 1/20/2022 10:36:11 AM Eastern Standard Time, elecraft@mailman.qth.net writes:  I am looking for a KXV3 or KXV3A  I/O

[Elecraft] WTB: K1 (or boards) for parts

Looking for a K1 and/or related boards (KFL1-2, KAT1) for parts/repair. Working is a bonus ;) Please email me off list. Thanks & 73, -Andrew / NV1B .. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB: KXV3 Or KXV3A I/O Interface For K3

I am looking for a KXV3 or KXV3A  I/O module interface for the K3.  Please reply off list.  Thanks.  73 Randy w...@aol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB: Original K2 Main Tuning Knob

Looking for an original main tuning knob for the K2. --Ed, N3CW— Sent from Mail for Windows -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home:

[Elecraft] wtb Elecraft Nifty manual KX3

Hello all, My new-to-me KX3/PX3 combo arrived Friday. Would like to pick up a Nifty manual for the KX3. Anybody have one they want to part with? Email me offlist please a...@comcast.net 73 and Merry Christmas! Darrell AB2E __ Elecraft

Re: [Elecraft] WTB KPA-1500

Good advice. Sometimes, at least, updates can be effected with a board swap. In my case something failed on the LPF board, but it was easy to swap. One thing that I've run into is that unless you have trained the autotuner across the full range of frequencies on each band, you can encounter a

Re: [Elecraft] WTB KPA-1500

Congrats! Great amp! One word of advice if buying a used amp, contact service with serial number and ensure it has latest updates. There were some updates along the way that make the amp more reliable, including additional protection for the LDMOS devices. My amp went back for updates and has

Re: [Elecraft] WTB KPA-1500

Mine is due to arrive the day after yours, Larry, on Friday. Yes, Merry Christmas to us. I'm very excited. Bob NN5D On Wed, Dec 1, 2021 at 8:32 AM Larry Boekeloo wrote: > Hi everyone... > > I found what I wanted and the KPA-1500 will be here tomorrow, December 2. > > Merry Chrstmas to me! > >

[Elecraft] WTB KPA-1500

Hi everyone... I found what I wanted and the KPA-1500 will be here tomorrow, December 2. Merry Chrstmas to me! Thanks everyone. Larry, KN8N Kalamazoo, Michigan __ Elecraft mailing list Home:

Re: [Elecraft] WTB KPA-1500

Used KPA-1500's are not that hard to come by, there are two for sale right now on QTH.com https://swap.qth.com/search-results.php?keywords=kpa+1500=titl eordesc John KK9A Larry Boekeloo KN8N wrote: I'm looking for a good used KPA-1500. I know they are hard to come by. I have a KPA-500 and

[Elecraft] WTB KPA-1500

I'm looking for a good used KPA-1500. I know they are hard to come by. I have a KPA-500 and KAT-500 I'll be selling once I find a KPA-1500. Anyone have one they are looking to sell? Thanks. Larry, KN8N Kalamazoo, Michigan __ Elecraft

[Elecraft] WTB - KAT3 or KAT3A

Looking for a K3 antenna tuner. Dave / W6ZL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] WTB KPA-100

WTB K2 100 watt amp, KPA-100 dead or alive. Please reply to: ni8nj...@gmail.com. Thank you. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] WTB: KAT-500

Never mind. I just picked one up locally. 73, -- Dave, N8SBE Quoting Dave New : Hi, Looking for a KAT-500 to go with the KPA-500 I just purchased from Carl, K8NU. 73, -- Dave, N8SBE __ Elecraft mailing list Home:

[Elecraft] WTB: KAT-500

Hi, Looking for a KAT-500 to go with the KPA-500 I just purchased from Carl, K8NU. 73, -- Dave, N8SBE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] WTB P3SVGA Board

I understand Elecraft no longer sells the P3SVGA Board for the K3/K3s. I'm looking for the board and associated cabling for a K3 if anyone has one they would be willing to part with. Thanks,Mike KD8RQE __ Elecraft mailing list Home:

[Elecraft] WTB: KPA100/KAT100/EC2

Looking to buy a KPA100 amp and KAT100 tuner in the EC2 enclosure. Thanks for info… --Ed, N3CW— -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home:

[Elecraft] WTB: K-POD

Anybody out there who wants to sell his K-POD? Ruined mine today due to stupidity while cleaning up the shack. K-POD was falling on the floor while I was moving a very heavy metal desk and landed right under the foot the moment when I let go of the table. Lesson learned: don't clean up the

[Elecraft] WTB: Short Flip-Down Stand for K2

Hello, I am looking for one of the shorter-than-stock flip down K2 stands (bails). It mounts on the two front feet of the K2, and is about an inch shorter than the original stock bail. Appreciate any leads or info; thanks. --Ed, N3CW— -- This email has been checked for viruses by

[Elecraft] WTB KXPA100

Anyone have a KXPA100 in good working order excess to their needs? Please contact me directly, off list. 73, David - N5DCH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB: KXPA100

Please let me know if you are interested in selling. Looking for excellent condition, non-smoking environment with tuner. Thx. Eric Robertson ewrjunkm...@gmail.com KI5PCZ Sent from my iPhone __ Elecraft mailing list Home:

[Elecraft] WTB: KXPA100

Please let me know if your are interested in selling. Looking for excellent condition, non-smoking environment with tuner. Thx. Eric Robertson ewrjunkm...@gmail.com KI5PCZ Sent from my iPhone __ Elecraft mailing list Home:

[Elecraft] WTB: KXPA100 preferably with KXAT100

Please let me know if your are interested in selling. Must be in excellent condition. Thx. Eric Robertson ewrjunkm...@gmail.com KI5PCZ Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] WTB: 73CNC Knob for K3

Me again. Still searching for a very specific knob. This is a solid black knob with a non-spinning finger dimple. Heavy at 14 oz. Have gotten offers but they don't seem to come through. Appreciated. Ed NI6S __ Elecraft mailing list

[Elecraft] WTB: KXPA100 preferably with KXAT100

Please let me know if your are interested in selling. Must be in excellent condition. Thx Eric KI5PCZ Sent from my iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] WTB: Elecraft KPA500 and KAT500

Forgot to add, please contact me only by email, laderman AT earthlink DOT net 73, Lou W0FK -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB: Elecraft KPA500 and KAT500

Looking for an Elecraft KPA500 and a KAT500 to pair with my K3S/P3. I’ve built and owned several of these in the past and am familiar with both units and current market pricing. Please provide particulars (serial numbers, age, kit or factory built, asking price shipped to 63141, etc). Payment

Re: [Elecraft] WTB Elecraft XG3 Signal Source

Howard, I have an XG-3. In like new condition, used maybe twice. Original box and all accessories. I would take $250 plus USPS Priority shipping. 73... Jim/KK1W Elecraft mailing list wrote > I want to buy an Elecraft XG3 signal source. If you have one to sell, > please contact me describing

[Elecraft] WTB: K3EXREF

I'm in the process of buying a second K3 (sans external reference) and I saw the boards were still available on the Elecraft site. Well, order cancelled, out of stock. If anyone has one available, I'm interested. Please contact off list, thanks! -- -Steve N1JFU

[Elecraft] WTB Elecraft XG3 Signal Source

I want to buy an Elecraft XG3 signal source. If you have one to sell, please contact me describing its condition and asking price including shipping to 97405 (Eugene, OR). 73 Howard/WX7HS __ Elecraft mailing list Home:

Re: [Elecraft] WTB KX3 with add-ons

Thanks Tim... I ended up purchasing a KX3, so I am out of the market for a while. Thanks again. -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] WTB KX3 with add-ons

Sent: Sunday, March 28, 2021 23:06 To: elecraft@mailman.qth.net Subject: [Elecraft] WTB KX3 with add-ons Hi I am new to the Ham world (passed technician test today) and am interested in buying a used KX3 in good condition with some add-ons... If you are interested in selling yours, please contact me

[Elecraft] WTB KX3 with add-ons

Hi I am new to the Ham world (passed technician test today) and am interested in buying a used KX3 in good condition with some add-ons... If you are interested in selling yours, please contact me at ewrjunkm...@gmail.com Thanks Eric __

[Elecraft] WTB: 73CNC VFO Knob for K3

I have a knob I am trying to replace. This particular knob is heavy and does NOT have a spinner. Solid black. Have one to sell? Thanks. Ed __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] WTB K3/0 mini

I know I am dreaming, but I would like one of these to use with a remote K3 contest station. Let me know off list if you have one you could let go. TU es 73 - - john.k...@gmail.com __ Elecraft mailing list Home:

[Elecraft] WTB: KXPA100 with ATU

Hi all, Looking for a KXPA100 with ATU in good, working condition. If you have one that’s excess to your needs, please let me know. Thanks Steve Kb2tvi Get Outlook for iOS __ Elecraft mailing list Home:

[Elecraft] WTB: Heavyweight Knobs for K3 SOLD!!

The knob has been sold via QTH.com Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] WTB: Heavyweight Knobs for K3

I have a CNC73 main tuning looking for a new home. Contact off list, 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] WTB: Heavyweight Knobs for K3

What do you have? Thanks, Ed NI6S __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net

[Elecraft] WTB K3S in Good Condition

I'm looking to purchase a used K3S in good condition. Please contact me off-line if you have one for sale. Thanks & 73Mike WB8BZK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] WTB: P3 Panadpter

I never had a P3, but used an SDR-IQ running SpectraVue software as an alternative.  Of course it requires a computer but if you're logging on one already port sharing works fine. SpectraVue "knows" the Elecraft frequency conversion and offers perfect tracking, demodulation (if you want it

[Elecraft] WTB: KAT-100 Autotuner for K2

Hello - Happy customer and my first post here on the reflector. I have had a K2/10 for about two years and enjoy using it as my primary rig for both CW and SSB. I have other QRP rigs and I really need a 100W transceiver, so I recently made the decision to upgrade my K2 with the internal

[Elecraft] WTB: P3 Panadpter

I realize many of us are scavenging for K3 related stuff but long story short I’m looking for a working P3 either with or without the VGA option. I also realize that Elecraft has an interest list but just not sure what timeframe (post 2021?) a P3 will be available. In 2019, I spent a fair

Re: [Elecraft] WTB: Nifty K2 Manual

John, Phil, and others, It is not a Nifty Manual, but a friend created a nice reference for the K2 as he was learning to use it. It is available for download on my home page - look a few paragraphs up from the end of the home page www.w3fpr.com You can print it and tri-fold it for a nice

Re: [Elecraft] WTB: Nifty K2 Manual

On 1/1/2021 7:35 PM, John Mcclun wrote: Looking for a Nifty K2 manual. If you have please let me know the cost, thank you Ditto for me as well. Serious sellers only, please. 73 de K2ASP - Phil Kane Elecraft K2/100 s/n 5402 From a Clearing in the Silicon Forest Beaverton (Washington

[Elecraft] WTB: Nifty K2 Manual

Looking for a Nifty K2 manual. If you have please let me know the cost, thank you. John Mcclun j...@mcclun.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] WTB: Working T1 autotuner

Anyone have a working T1 QRP autotuner they would sell? Prefer to pay with PayPal if at all possible. Please reply off list to w...@cox.net Thanks, Jim, W0EB Sent from my iPad __ Elecraft mailing list Home:

[Elecraft] WTB K3S

CWWant to buy factory built K3s (not K3 upgrade). Prefer 2nd receiver and usual accessories 8 pole filters, DVR, internal tuner, etc.).73 Steve AA4V 843-834-1616 via PayPal. Steve AA4V __ Elecraft mailing list Home:

[Elecraft] WTB K-Pod

If anyone is willing to part with the K-Pod please contact me off list nick.ve3ey[at]gmail[dot]com 73 Nick VE3EY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] WTB: KSYN3A Upgrade Board

I need one more myself, if anyone has they’re not going to use. tnx Mike / W5JR Alpharetta GA > On Dec 8, 2020, at 11:20, w4sc wrote: > > Randy > Contact me off list > Ben W4SC > > Sent from Mail for Windows 10 > > __ > Elecraft

[Elecraft] WTB: KSYN3A Upgrade Board

Randy Contact me off list Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] WTB: KSYN3A Upgrade Board

I am looking for a KSYN3A synthesizer board for the K3  73 Randy __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] WTB: Fairly Basic K3 or Possibly K3S

I’m looking for a basic K3-100, preferably factory built. (Not a deal breaker though) No second RX is required nor is the ATU. The KXV3 option is required. I would be most interested in a radio with CW filtering and perhaps the 6Khz AM filter. I’m just looking for a basic K3 at a reasonable

[Elecraft] WTB: K3/K3s Digital Voice Recorder (KDVR3)

Hi all I’ve signed up to the Elecraft “wish list” of K3 accessories but its unclear if or when Elecraft will resume availability of K3/K3s accessories. In the interim, I’m interested in purchasing a KDVR3 if anyone has one spare. Contact off list at w6...@arrl.net Paul

[Elecraft] WTB K60XV

Hi guys,I would like to buy a K60XV kit or assembled.PM me please on yahoo or callsign at gmail dot com.73' de YO3IAZ, CristianK2 #6641 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] WTB: P3

Yes, I did. Thanks. 73 Eric WD6DBM On Tue, Sep 8, 2020, 12:50 PM Larry Shapiro wrote: > Have you found one yet ? > Larry K6ro > > Sent from my iPhone > > > On Sep 5, 2020, at 4:16 PM, Eric Norris > wrote: > > > > Flexible on options, if any. Contact me offlist at this address. > > > > 73

Re: [Elecraft] WTB: P3

Have you found one yet ? Larry K6ro Sent from my iPhone > On Sep 5, 2020, at 4:16 PM, Eric Norris wrote: > > Flexible on options, if any. Contact me offlist at this address. > > 73 Eric WD6DBM > __ > Elecraft mailing list > Home:

[Elecraft] WTB: P3

Flexible on options, if any. Contact me offlist at this address. 73 Eric WD6DBM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] WTB: KVR3 digital voice recorder for K3

Please have your friend check *KDVR3 Digital Voice Recorder* indicate *quantity 3* in the box at the bottom of the Elecraft K3/K3S Options Interest Form: https://elecraft.com/pages/k3-k3s-options-interest-form Many other currently-unavailable K3/K3S options / upgrades are listed there too, such

[Elecraft] WTB: KVR3 digital voice recorder for K3

Hello, A good friend wants to buy three KVR3 boards for his several K3's ... Write to me off-board with price. Many thanks, Alan -- Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955) 570-916-9590 (cell, text) https://WilcoxEngineering.com http://www.eham.net/reviews/detail/6768 ... Elecraft

[Elecraft] WTB an SP3 for the K3

Looking for an external speaker for my K3. The internal speaker doesn't have good audio quality. Thanks, Tom Muller WA6USA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] WTB 13 KHz Filter for K3

On 8/22/20 at 10:39 PM, wa6...@gmail.com (Tom Muller) wrote: > I understand this filter will work on FM and AM in the K3 Works fine on AM and FM. Also works on wide band digital like FT8 and PSK. 73 Bill AE6JV --- Bill Frantz

[Elecraft] WTB 13 KHz Filter for K3

I understand this filter will work on FM and AM in the K3 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] WTB: KX3 Left/Right side panels

: Thursday, August 13, 2020 1:01 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] WTB: KX3 Left/Right side panels Howdy Gang. Wondering if anyone out there has spare KX3 left/right side panels for sale? Many thanks. Stay healthy and enjoy. 73, Joe W2KJ

  1   2   3   4   5   6   7   8   9   >