hi everyone, would like to ask the group about a problem. I had no problem
with my K2 connecting with my N4PY software before a KAT/100 update from 1.09
to 1.10. ever since the update and service to the radio, I can not connnect
with my control software. Even with ham radio delux, it
Have you confirmed that the port settings in Winders, the application,
and the radio all match?
David Wilburn
NM4M
http://www.nm4m.com
John Klokis wrote:
hi everyone, would like to ask the group about a problem. I had no
problem with my K2 connecting with my N4PY software before a
John,
Remove the KAT100 AUX I/O cable and see if you can connect. If so, the
problem is in the KAT100 or its cable to the K2.
There is likely something that you inadvertently touched (and changed)
in the KAT100 during the firmware upgrade. The N4PY software (and HRD)
do not use any of the
Guys, I need some advise.I wrote last night about the keyer problem I had
with my K2. That has been resolved. Now I have a new problem that surfaced
late last night. I was using the automatic antenna tuner and on 20 meters and
it seemed it was laboring tryin to tune. It tuned alright.
Hello fellow hams, I want to post this to the group to take advantage of the K2.
I have for sale a K2/100, KAT/100:
Ø VFOs with multiple memories
Ø Slpit TX/RX operation, RIT/XIT. Full break in CW, memory keyer,
Ø Narrow IF crystal filtering, excellent RX dynamic range and IF
John K3JK here, Would someone give me some feedback on my K2? I plugged a
mono plug into my keyer jack when I was using an external keyer. I might have
shorted a resistor or diode. now as soon as i plug the keyer in with a stereo
plug, i get a constant carrier. When I had the mono plug
John,
I seriously doubt that plugging a mono plug in the K2 key jack would
cause any damage - although the K2 would do strange things while the
mono plug was inserted.
To check it out, plug a bare (no wires attached) stereo plug into the
key jack. If you then get a constant carrier, look
7 matches
Mail list logo
