Great news Rick. Can you give me some details to get me started? Are
you using the "KPA1500 Remote" application? No problems with port
forwarding my router.
Dean
K3GGN
~~~
On 9/22/2020 7:28 PM, Rick Tavan wrote:
Yes, I do it all the time. You may have to set up some port forwarding
and how
Yes, I do it all the time. You may have to set up some port forwarding and
how to do that depends on your router(s).
/Rick N6XI
On Tue, Sep 22, 2020 at 9:03 AM K3GGN wrote:
> Is it possible to use the x.ddns.remoterig.com service with user name
> and
> password to communicate with a remote
Is it possible to use the x.ddns.remoterig.com service with user name and
password to communicate with a remote Elecraft KPA1500 amplifier directly
without the need for an attached pc? How may that be done?
KPA1500 Remote application doesn't seem to be configurable to accomplish
this.
Dean
This set up has been working without problems for several weeks. Then CAT
connection problems began. Audio is received and decoded, the K3/0 can
control the radio, however When WSJT is started, the familiar ³Rig Control
error² dialog box appears. In the Settings Menu under Radio, It does NOT
pass
I have been using the set power per band and locking it but was wondering, for
an up coming club field day, if anyone knows a way of setting the max power out
but still being able to adjust down from that point.
I am using the K3S with an Expert 1.3 so would like to set a limit for club use
so
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
K3 Utility 1.16.6.25
Opening the K3 Set Date and Time dialog actually changes the
radio date/time before selecting "OK" or "Apply".
I expect "OK" to change the date/time and close the dialog.
I expect "Apply" to change the date/time and leave the dialog open.
I expect "Cancel" to leave the
elecraft-boun...@mailman.qth.net said the following on 12/30/2011 12:24 PM:
The results of your email command are provided below. Attached is your
original message.
- Results:
You can access your personal options via the following url:
17:34
To: 'd...@w3fpr.com'
Cc: 'elecraft@mailman.qth.net'
Subject: RE: [Elecraft] Set up of Heil ProSet K2 Headset assembly
Hi Don
I can confirm the following points -It is an Elecraft ProSet which I bought
direct from Elecraft, all pins on the configuration header have a jumper
straight across
condenser mic is not working - how can I check it or are
there other things I should look at?
73
Ray G3XLG
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: 04 November 2011 20:09
To: Ray Spreadbury
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Set up of Heil
Ray,
It sounds like you did everything right. Sorry to hear of your
disappointments.
Do you have a computer soundcard that you know works with a computer
microphone?
If so, plug the Proset K2/3 mic into that soundcard - it should work.
To check the adapter, plug a computer mic into the Proset
@mailman.qth.net
Subject: Re: [Elecraft] Set up of Heil ProSet K2 Headset assembly
Ray,
It sounds like you did everything right. Sorry to hear of your
disappointments.
Do you have a computer soundcard that you know works with a computer
microphone?
If so, plug the Proset K2/3 mic into that soundcard
borrow an Elecraft ProSet from
a nearby friend see if that works in my K2.
Any other ideas please?
73, Ray G3XLG
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: 05 November 2011 12:30
To: Ray Spreadbury
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Set
Hi Guys
I did not assemble my K2 (no 4099) which I bought second-hand and I now wish
to use a ProSet K2/K3 I have bought from Elecraft.
According to the instructions which came with the ProSet , (Step 1) I have
removed the 4 exterior screws securing the K2 front panel to the front of
the
Ray,
Locating those screws is actually easy. Look down between the Front
Panel and Control Board and you will see two hex standoffs about 3 cm
down and about 4 cm from each side panel. The screws thread into those
standoffs.
The one on the right is easiest - just remove the screw.
On the
Unassembled kits from 2005. They're out of warranty, of course.
K2 #4685
K160RX
K60XV
KAT100-1
KDSP2
KNB2
KPA100
KSB2
FDIMP
$1876 if bought new today. For sale as a single package. $1500 gets them
shipped insured UPS to you.
Please reply off list.
James D. Leslie
9360 Lost Forest Dr.
Dave,
Would you sell the KPA100 separately, and if so, for how much?
73 de dave
ab9ca/4
Dave Leslie wrote:
Unassembled kits from 2005. They're out of warranty, of course.
K2 #4685
K160RX
K60XV
KAT100-1
KDSP2
KNB2
KPA100
KSB2
FDIMP
$1876 if bought new today. For sale as a
Well, within minutes of my posting about the set power (as displayed
by my newest K3) not squaring with what I was seeing on a LP-100A,
Alpha 4510 and Bird wattmeters, I received a detailed email from Gary
at Elecraft with step by step suggestions of things I should check. I
had already done a TX
Hi all,
Finally got around to adding screen-shots of the configs I use for
the K3 with N1MM and Logger32, using the USB-serial cable and with
Config:PTT set to RTS-DTR
Cheers,
Paul
http://www.zl4pw.orconhosting.net.nz/media/cw_keyer_3.15.jpgLogger32
CW Keyer V3.15
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
20 matches
Mail list logo
