in the MicroKEYER 2's configuration tab in Router).
This has always worked reliably here.
Regards
Lu Romero - W4LT
Date: Sat, 6 Feb 2010 16:12:47 -0500
From: Joe Subich, W4TV li...@subich.com
Subject: Re: [Elecraft] Firmware upload problem
To: 'Ruben Navarro Huedo' runa...@gmail.com
Use a USB to Serial adapter or an RS 232 cable, do not attempt to load
firmware through the microHAM router. It works sometimes, but this
mechanism is not reliable for firmware load.
Dick, K6KR
Sent from my iPhone
On Feb 6, 2010, at 8:14 AM, W4CCS w4...@w4ccs.com wrote:
Attempted to
The K3 bootstrap loader runs at 38400. After firmware loaf, the K3
Utility restores the speed it started with. However if the firmware
load fails, the K3 may stay at 38400.
Dick, K6KR
Sent from my iPhone
On Feb 6, 2010, at 8:14 AM, W4CCS w4...@w4ccs.com wrote:
Attempted to upload new
The K3 bootstrap loader runs at 38400. After firmware loaf
Sliced? Or unsliced? 8-)
Will you be going to Visalia this year?
73,
George T Daughters, K6GT
CU in the California QSO Party (CQP)
October 2-3, 2010
__
Elecraft mailing
I'm using the Microham router software to talk to the K3 and this has
been working great until now.
DO NOT use microHAM Router to upload firmware to the K3.
It IS NOT SUPPORTED. Find a computer with a hardware
serial port or a dumb external USB to serial converter.
73,
... Joe,
You can use microHAM, but you have to select:
No radio and dissable router queries in the microHAM software.
El 06/02/2010 21:21, Joe Subich, W4TV escribió:
I'm using the Microham router software to talk to the K3 and this has
been working great until now.
DO NOT use microHAM Router to
My opinion --
Since Joe W4TV is an authority on microHAM gear, I would say use it at
your own peril if you insist. Yes, there have been reports of success,
but Joe says IT IS NOT SUPPORTED! Please do not complain that you broke
your K3 with a firmware load when you used the microHAM router.,
Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ruben
Navarro Huedo
Sent: Saturday, February 06, 2010 3:26 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware upload problem
You can use microHAM, but you have
8 matches
Mail list logo