Tom,
If you built the KX3, it should be no problem. There is one 2-56 size
screw but the rest are 4-40 size. The #4 lockwasher is the smallest
part, so if you can handle that you will not have a problem.
Download the KXBC3 manual to get an idea of what is involved.
73,
Don W3FPR
On
The KXBC3 is very easy to install. As I remember, the trickiest bit was getting
the adhesive shield lined up right before I stuck it on.
Installation instructions are here, starting on page five. You can open up your
radio and look at the screws where it will go. I don’t remember them being
Mark,
I believe that the parts list errata for the KXBC3 is wrong. Those are
supposed to be flat head screws. I submitted an error correction on Friday to
Elecraft and got an acknowledgement. Other then that, I did not find anything
awry from the regular assembly instructions.
phil
K7PEH
3 matches
Mail list logo