Firmware load does not change the band limits.
73 de Dick, K6KR
KX3 Utility Author
On Aug 31, 2012, at 10:52 PM, 須崎 純一 ji1...@jarl.com wrote:
My KX3 is blocked on 5MHz to earn an approval of JA telecommunication office.
Whenever I introduce the latest firmware into my KX3, I hope this
I'm running a 0204 with NaP3 on The Release to Manufacturing build of
Windows 8. 64 bit, it all works great as expected They don't have the
Windows 0204 drivers on the website because it comes with them in the
box.(I found it curious why they don't have them on the website for the
0204) I
You may well apologise, Chuck, but as this is a worldwide reflector
about Elecraft products and assistance, information about American
license qualifications is of little interest to the rest of us.
Perhaps we should now start a thread on the history of the UK Radio
Amateurs' Examination and
I tried this morning to install the new firmware for the P3 (beta SVGA
0105BEATA.ZIP) but I was not able to run the P3 utility (1.12.4.26). I use a
MAC and the problem is probably the new OSX (mountain lion) I installed few
weeks ago.
K3 utility is running fine.
There was a threat on the
Thank to Adrian VK4TUK... 5 minutes after my threat he mailed me the solution
!!! Fine reflector.
Nicolas
NC40, SIERRA, K1, K2, K3, P3, KPA500, KX1, waiting for KX3 KAT500.
--
View this message in context:
On Sep 1, 2012, at 4:08 AM, G4DMP da...@g4dmp.fsnet.co.uk wrote:
Perhaps we should now start a thread on the history of the UK Radio
Amateurs' Examination and Morse Test? I think most definitely NOT.
Why not? I think it'd be interesting myself. Actually,
licensing/testing/callsign issuing
My KX3 is behaving unusually this morning, so much so that I cannot use it for
CW. The first character is beginning, I don't know, about ½ a second delayed
from when I press the paddle (both dit or dah), causing just enough confusion
in my brain to obviate my sending readable cw. It's not the
My KX3 is behaving unusually this morning, so much so that I cannot use it for
CW (I normally send at about 25-30 WPM; I now cannot send more than about 12
WPM). The first character is beginning, I don't know, about ½ a second delayed
from when I press the paddle (both dit or dah) and extra
Joe, Then why not revert to previous firmware and compare?
I should add that I just updated the unit to the latest firmware: MCU 1.12 /
DSP 0.94, but the problem's relation to this may or may not be significant.
Thanks
Joe - WB2SSB
If you are
trying to run this on some old dog single or dual core setup with a 13 year
old OS like XP... well then good luck.
I am running mH Router + LP-Bridge + LP-PAN2 + NaP3 + N1MM + K3 + mAudio 2496,
all
with XP32 on a 2-core AMD 2.1Ghz machine that's a bit long in the tooth.
Tony,
You are correct. However, I think you missed my point. The discussion has been
concern over using cards that are capable of a 192KHz sample rate. My point
was, maybe stated badly, was that shouldn't be a consideration as Elecraft was
saying you really should stay at 48KHz, but 96KHz
Would one of you please share?
73, Mike NF4L
On 9/1/12 7:15 AM, Nicolas Drin wrote:
Thank to Adrian VK4TUK... 5 minutes after my threat he mailed me the solution
!!! Fine reflector.
Nicolas
NC40, SIERRA, K1, K2, K3, P3, KPA500, KX1, waiting for KX3 KAT500.
--
View this message in
On Sat, Sep 1, 2012 at 9:25 AM, k3...@comcast.net wrote:
...will see it, just 48KHz at a time...
---
You can see it 96Khz at a time if your card will sample at 96K and your
setup is correct.
Tony KT0NY
--
http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
I appreciate specific recommendations for KX3 accessories, so I am trying to
return the favor here. I have recently purchased and am now using a tiny
Bluetooth transmitter and really comfortable, excellent sounding Bluetooth
stereo headphones that have really made using my KX3 so much better.
I am running mH Router + LP-Bridge + LP-PAN2 + NaP3 + N1MM + K3 +
mAudio 2496, all with XP32 on a 2-core AMD 2.1Ghz machine that's a
bit long in the tooth.
Which microHAM interface are you using? With CW Keyer, Digikeyer,
Digikeyer II. microKEYER or microKEYER II you do not need LP-Bridge.
Actually, David, I'm interested in not only the UK exams, but also the
callsign
assignments; i.e. G vs. M vs. 2
73 de Jim - AD6CW
On 9/1/2012 1:08 AM, G4DMP wrote:
You may well apologise, Chuck, but as this is a worldwide reflector
about Elecraft products and assistance, information about
I am working on installing my KX3 in my truck and I am curious what size screw
is used between the case and speaker mount. We are examining ways to physically
mount the KX3 into my silverado. The mount we are likely using is a Panavice.
Thanks,
Keith
AG6AZ
Sent from my iPhone please excuse
Replied privately to cut down on off topic QRM
In a recent message, Jim Lowman jmlow...@sbcglobal.net writes
Actually, David, I'm interested in not only the UK exams, but also the
callsign
assignments; i.e. G vs. M vs. 2
73 de Jim - AD6CW
On 9/1/2012 1:08 AM, G4DMP wrote:
You may well
Joe...
Good thought. Along the way to getting LP-Pan working, I had forgotten about
the
secondary CAT port in Router. I tried that, and as you said, it works fine. One
small
point is the need to load Router in the standard environment. Without it
there's no
control with NaP3. In that way,
I can answer that one, mostly, and only because I asked someone about it ages
ago. Hard to believe that was at least 15 years ago. So, before Eric yells end
the thread, as he will undoubtedly foo soon...
Anyway, all the 1X2 G calls were issued pre-WW2, and then they started with the
G2's, but
In the late 80#39;s it was time to upgrade. I held a conditional for 30 years.
After lots of studing and code practice I made the trip to Chicago and took
both the advanced and extra. Had to take them in order: advanced, extra 20
wpm, and then Extra written. It was a long day but passed all
Keith, the screws that are used to secure to speaker to the case are 2-56
1/4. However, they screw (self-thread) into the relatively soft plastic
speaker frame so they cannot handle any significant mechanical force beyond
holding the speaker in place.
73, Ron AC7AC
-Original Message-
Newegg Computers is having a pretty good Labor Day sale this weekend. For
example, I spotted this item for $12.99, with free shipping:
Thanks Ron for the advice. We found a suitable way to mount the rig. My guess
is that we will need to revisit this down the road. We are about 35% complete
with the install. When it is done I will post some pictures of it on my qrz and
add it to my blog.
Keith
AG6AZ
Sent from my iPhone please
He already did;
[Elecraft] FCC exams
Eric Swartz - WA6HHQ, Elecraft eric at elecraft.com
Wed Aug 29 14:33:29 EDT 2012
Previous message: [Elecraft] FCC exams
Next message: [Elecraft] K-1 4-bander suggestions?
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Thanks for the heads-up Dave...ordered two.
On 9/1/2012 2:19 PM, Dave Hachadorian wrote:
Newegg Computers is having a pretty good Labor Day sale this weekend. For
example, I spotted this item for $12.99, with free shipping:
My KPA100 has been giving good service for nine and a half years. Back in July,
it was giving me an INFO 080 issue, which I tracked down to a defective U6 -
EL5146C on the KPA100. I've successfully replaced this chip, and now the KPA100
is responding.
Because of the part replacements, I have
Well, I just figured out the 'problem' with the delayed response of keying the
KX3 rig I'm LOL'ing.
I have been playing with a Bluetooth transmitter / headphone on the device ...
the audio sounds GREAT and it's really a pleasure not to be tethered to
the unit but ...
Well, I
Glad you shared. I had been thinking about using a bluetooth headphones,
but I will avoid them now.
Ken KE3C
On Sat, Sep 1, 2012 at 4:38 PM, Sanger, Joseph joseph.san...@nyumc.orgwrote:
Well, I just figured out the 'problem' with the delayed response of keying
the KX3 rig I'm LOL'ing.
Works great for listening though!
:-/
From: Ken Nicely [mailto:k...@nicelyweb.com]
Sent: Saturday, September 01, 2012 06:04 PM
To: Sanger, Joseph
Cc: elecraft@mailman.qth.net elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 CW Key Sluggish Response
Glad you shared. I had been thinking
Joe,
Thank you for the review. I already have sweet stereo Sony BT headset and
this device will remove cable and allow me to listen the KX3 in the shack
peacefully. I have ordered one!
73,
Bill
K9YEQ
KX3 Field Test #12
-Original Message-
From: elecraft-boun...@mailman.qth.net
Bill, good advice all around, but what is the rationale for this one? (below)
Thanks
Alan
K2ACK
Sent from my mobile device.
On Aug 31, 2012, at 18:45, billr...@comcast.net wrote:
2. If your computer boasts over 4 gig of RAM, you must throttle it back to no
more than 4 GB. This is done via
For that, it works nicely! Bill. But, unfortunately the latency will mess up
any attempt to send CW.
- 73
- Joe WB2SSB
- Original Message -
From: Bill K9YEQ [mailto:k9...@live.com]
Sent: Saturday, September 01, 2012 06:18 PM
To: elecraft@mailman.qth.net elecraft@mailman.qth.net
I am in the final assembly of my Kx3, And it appears that the KXFL3 is keeping
that corner of the case from completely closing (by just a little bit)- as in
both sides bottoming out, where the thumb screw comes in contact with the to
chassis. . With the FL3 removed, it closes completely. I have
I have 16 Gb ram. That means I have to shut off 12Gb every time I want to use
my sound card? Yes, that makes sense. I guess the
drivers work fine. I think not.
73,
Tim Herrick, KQ8M
Charter Member North Coast Contesters
k...@kq8m.com
AR-Cluster V6 kq8m.no-ip.org
User Ports: 23, 7373 with
The weekly Elecraft SSB net will meet tomorrow (9/2/12) at 1800Z on 14.3035
MHz +/- QRM. I will be the net control from western Oregon. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home:
I have had some parts around for a while now that I intended to build a balun
out of. I finally got around to working on one over the past week or so (I
started last Sunday night and did all the rest of it this evening HI).
My idea was to make a 1:1 balun that fit right on the rig for using the
I am currently using HRD 5.0 with my K3 (Win7 op sys). It works fine,
but it would be nice to have a larger selection of on-screen controls
(buttons sliders). Does anyone know for sure if the new version
provide same when it is released?
Yes, I ended this thread several days ago. Let's let this topic rest.
73,
Eric
Elecraft List Moderator
www.elecraft.com
_..._
On Sep 1, 2012, at 1:02 PM, Adrian vk4...@bigpond.com wrote:
He already did;
[Elecraft] FCC exams
Eric Swartz - WA6HHQ, Elecraft eric at elecraft.com
Wed Aug
Folks, this topic was closed several days ago due to excessive posts.
73,
Eric
Elecraft List. Moderator
www.elecraft.com
_..._
On Aug 31, 2012, at 9:34 PM, Richard Fjeld rpfj...@embarqmail.com wrote:
Does anyone remember this?
I'd like to add one thing that I remember about taking my code
Thanks for telling us about this feature.
I remember one of the jokes we played on announcers at the
collage radio stations. We would set up a short delay with a 3
head tape recorder and patch it into the audio line when the
record stopped. The DJ would then hear his voice delayed by
about
Bill,
I am puzzled why a bad EL5146C would cause an INFO 080 problem. INFO 080
normally is the inability of the MCU to properly communicate with
another firmware processor. While it is entirely possible that the
EL5146C was dragging down the output of the +5v regulator and causing
the KPA100
Well, there is no speaker in the KX1...
I hate earbuds, headphones, earspeakers, earphones... All of them.
I hate stuff in or on my ears and head.
Yesterday I opened up my Apple itouch 3G. It has a speaker, a really tiny
thing. Hummm... Measured eight ish ohms... Humm.
It would easily fit into
Just took a glance only at Mouser online and they stock speakers down to an
inch or less diameter. Most of the ones they list are 2.4 kHz sounders
which you want to steer clear of unless that is what use like to listen
too. But I did see a 22mm speaker with good bandwidth.
Jim K0XU Sent from my
From: ji1...@jarl.com
To: die...@comcast.net
Subject: RE: [Elecraft] KX3 firmware update may unblock 5MHz ?
Date: Sat, 1 Sep 2012 23:00:16 +0900
Dear Dick,
Thank you for your quick and clear answer.
Now, I can replace firmware without hesitation.
73 Jun JI1TLL
CC:
We are about halfway through my install of the KX3 in my 97 Silverado and it is
going well so far. We probably have another two days (16-20 hours) plus worth
of work to go before we are done with the install.
We installed the Rammount for the iPad and the KX3 and it looks epic. The amps
are
Good Evening,
Please join us tomorrow afternoon and evening.
1) Hail signs (first letter or two of the suffix of your call)
2) NCS help (as well as QSP/QNP relay help)
Sunday 2200z (Sunday 3 PM PDT) 14050 kHz
Monday 0200z (Sunday 7 PM PDT) 7045 kHz
Stay well,
Kevin.
On 9/1/2012 5:58 PM, Bill Frantz wrote:
Thanks for telling us about this feature.
Psychoacoustics is the study of the human perception of sound, and its
practitioners are a part of the Acoustical Society of America, of which
I am a member. The discipline is quite well developed, and what these
Back in the old days many of us used no sidetone at all. We just listened
to the clatter of our straight keys. In High School I could chat with my
fellow hams in class with gentle taps of a pencil on the desktop.
But I agree, I needed sidetone when I switched to a keyer.
Funny, it was supposed
I have a serial cable that I use on my W1 wattmeter but don't have a
serial cable with my KX3 (I got a USB cable with it). Would the cable
for the W1 work on the KX3. I would assume so, but assuming has
occasionally got me in trouble in the past. :)
73
Tim
NZ8J
On Sat, Sep 1, 2012 at 10:13 PM, NZ8J n...@woh.rr.com wrote:
I have a serial cable that I use on my W1 wattmeter but don't have a
serial cable with my KX3 (I got a USB cable with it). Would the cable
for the W1 work on the KX3. I would assume so, but assuming has
occasionally got me in
I don't know of any studies relating to delays and our ability to
send CW.
Empirically the issue starts to become noticeable when the delay is
more than an element (dit/dah) and certainly becomes critical when
the delay is a substantial part of a letter. Just like the soloist
and the
Hi George,
Great to hear from you. Henry was mondo cool. A google search will
turn up lots of interesting stuff. For the last couple of decades of
his life he was the chief scientist for our country, founding director
of the Smithsonian. The entire US government closed down the day he died
Finally waded into digital modes with FLdigi, but have a K3 question
regarding Line Out control. From what I could tell from the manual,
Line Out to my PC ought to be a level adjusted by Config: Line Out.
However, each time I turned down the AF control, the signal to FLdigi
went away. What am I
54 matches
Mail list logo
