Within FLDIGI there is a transmit audio level control in the lower right
corner. Just below the LK tab. I use a value of -15. The arrows
left and right of the box will increase or decrease the level going to
the radio. My Line Gain which is adjusted by using the MIC knob is
at 30.
To those having problems with DATA modes, take a look at the article on
my website www.w3fpr.com. Scroll the left column to the last article
and click on it to open the document.
While VOX should reliably put the radio into transmit, you can set
FLDIGI to use PTT via CAT command - BUT don't
Download and install FLRig. Setup is straight forward and they support K3 (and
maybe KX3 but since they're all the same command language, K3 should work).
FLRig implements CAT control eliminating the need to use VOX. HTH
73,
Brian, K0DTJ
Wow, I was preparing to dump all of my Elecraft stock in the morning.
Mike W5FTD
On Monday, April 1, 2019, Wayne Burdick wrote:
> Joking, BTW. Eric and I both have a good 20 years to go :)
>
> Wayne
>
>
>
> elecraft.com
>
> > On Apr 1, 2019, at 9:50 AM, Wayne Burdick wrote:
> >
> >
Yes, I use a pair of powered computer type speakers. Feed the two audio
outputs from the K3 which are on the SPEAKERS/STEREO jack to the L and R
speaker respectfully. Adjust the volume on each speaker as you desire.
The ones I use are from the defunct Radio Shack being a Realistic Cat
While I agree that the left-right audio balance feature would be nice to see in
a basic K3 etc. as update etc. why not just build an outside box to accomplish
that. Therefore it could be used on your legacy rigs as well. I could myself
use a bit more in the Left side I think.
I already have
Yes, we agree - the delay and averaging for forward power for just the LCD
display was incorrectly set to too low of a value in 2.10.
Fortunately this is only a LCD display issue and does not impact the Power/SWR
bargraph or internal operations of the amp.
We'll get this fixed in a new f/w
Hi Group:
Don't forget, it's not difficult to feed the rig's audio output to a modest
audio mixer (check a music store), which would easily permit you to
independently adjust the audio levels of the feed to your headset or speakers.
This could be made to work for a "mono" feed (single
You could run the K3 audio through your computer system and adjust the
balance in its sound mixer. Or install more sophisticated mixing
software like VoiceMeeter which will give you a 15-band graphic
equalizer and processing effects; also a handy way to record on air
activity.
73,
Drew
AF2Z
For Sale RRC 1258 MKII Elecraft twin set with cables. Everything works
great $500. The Elecraft RRK0CBL cable is included
Howard Sherer AE3T
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I contacted Win4K3Suite support and Tom, VA2FSQ says it should work as Jim,
N7US and I described, but make sure both radios have the same firmware version.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of B.
Sent: Monday, April 1, 2019 03:46
To:
Thanks for the heads-up. Lillian is busy canceling our retirement plans.
Wayne
> kevinr wrote:
>
> Wayne and Eric are still running the company, both having taken /T//he
> Elixir/ in 2025. Elecraft currently generates 12.3 % of the Earth’s gross
> domestic product.
>
Great commentary on the venerable K2. I had an experience that some on this
reflector might find interesting. I purchased a Yaesu FT-991A solely for the
purpose of VHF/UHF SSB/CW. (Our local group's been buggin' me to join them
on 2m SSB, hihi.)
Well, I saw C8T on the cluster and decided to give
Wayne and Eric are still running the company, both having taken /T//he
Elixir/ in 2025. Elecraft currently generates 12.3 % of the Earth’s
gross domestic product.
Wayne created the ultimate radio outfit ensemble. His universal heat
modulator layer worn next to the skin to wick off excess
Folks - If you suspect fraud or a problem with a for sale posting to the list
like the one below, please email me as the moderator instead of posting to the
list. Or if I am unavailable, email sa...@elecraft.com and we will look into it
In this case the for sale email below appears to be
Hi Bill,
We just caught this and it will be corrected in the next 1500 f/w release.
73,
Eric
/elecraft.com/
On 3/28/2019 9:40 PM, K8TE wrote:
I brought my KPA1500 to Lubbock for the CQ WW WPX SSB Contest. Like a good
Elecraft owner, I checked for firmware updates using the KPA1500 Utility,
Hi Brad,
I apologize for the confusion on this.
The following K3/K3S menu entry enables the K3/K3S to send out the transmit
frequency on the AUXBUS cable to the amp and external tuner.
In the K3/K3S KAT3 menu item, tap the 1 key to set it to "KAT500=Y".
It’s documented in the current
Awesome, thanks!
On Mon, Apr 1, 2019 at 1:20 PM Eric Swartz - WA6HHQ, Elecraft <
e...@elecraft.com> wrote:
> Hi Brad,
>
> I apologize for the confusion on this.
>
> The following K3/K3S menu entry enables the K3/K3S to send out the
> transmit frequency on the AUXBUS cable to the amp and external
On 4/1/2019 7:52 AM, engineercm wrote:
> Bumper cars? Of course. Manual typewriter (with the beloved Courier
> font? Natch. VW bus? Never drove one but saw many on the road.
>
> All of these are no longer in production---except the K2.
I used a manual typewriter until I got a Selectric that
K9OM sed:
I really like the idea of adding the capability to the K3 that allows us
to adjust the left and right channel volume.
Then W4TV sed:
It's already there. Please refer to the K3/K3S Owner's Manual and look
up CONFG:SUB AF.
But:
The SUB AF setting does nothing for my K3, probably
Just had to comment on the iconography of the March 2019 Old Stuff Day. I'm
old enough to have witnessed all of the icons on that page. Bumper cars? Of
course. Manual typewriter (with the beloved Courier font? Natch. VW bus?
Never drove one but saw many on the road.
All of these are no
Hi Jim,
You want to look at a wider range of frequencies than the K3 IF
presents. See:
https://www.nk7z.net/sdr-rfi-survey-p1/
for a how to do this, using an SDRPlay radio.
That link goes to part 1 of a multi-part set of articles covering how I
use SDRPlay radios to see just what is
Now that 160 season is almost over and my antenna farm is doing good I'm
going to start chasing RFI at my new QTH.
I plan to use my RSP2Pro with HDSDR to do some time lapse recording to see
when things come and go as a first step.
To do this I plan to use my existing antennas and I'd like to
The approach I've used is to use a couple of BNC to BNC jumpers and a
BNC "T" connector. Connect the RX OUT to one side of the "T". Connect
the RX IN to the other side of the "T" connector. Connect the RSP2 to
the other port on the "T" connector. Then press the RX ANT on the
radio. This
I see my name and call were not included. My bad. Some reflectors
(groups.io) insert it; other's don't. So, i forgot.
My posts on this reflector and few; I'll try and remember in the future!
72,
Clark WU4B
EM73 - Atlanta, GA
K2 #6011
--
Sent from: http://elecraft.365791.n2.nabble.com/
I am sorry for any confusion. But I used that antenna on the Maldives Isl.
and from D4 (Cape Verde) with great success.
3200 + QSOs as D44TUK on CW and 1400 as D44TUQ (my YL) on RTTY was
verifying that.
To answer your question now, I have seen that combination with the 4:1
balun at one of
I am running into the exact same thing. fldigi gets audio and freq from rig
no problem. USB codec selected for fldigi output but rig just shows TX light
but no power out or ALC indication on rig. Nothing plugged into line in
jack. Rig set to TX DATA. MIC SEL = Line in on rig. Same symptoms with
Solved it.
In TX DATA mode the MIC level controls the LINE IN Level (dah!). So add
that to your checklist!
Mine was at the default 0. Turned it up and level 5 seems to be the right
amount of drive.
Thanks all.
Brian ve3bwp
--
Sent from: http://elecraft.365791.n2.nabble.com/
I hope someone has solved this, too, as I am having the identical problem with
my KX3. Other digital modes like FT8 work FB. I would like to not have to use
VOX to key the rig. I suspect that I just haven't found the right combination
of trial & error.
Jay K3BH
On Mon, Apr 1, 2019, at 18:53,
Joking, BTW. Eric and I both have a good 20 years to go :)
Wayne
elecraft.com
> On Apr 1, 2019, at 9:50 AM, Wayne Burdick wrote:
>
> Thanks for the heads-up. Lillian is busy canceling our retirement plans.
>
> Wayne
>
>
>> kevinr wrote:
>>
>> Wayne and Eric are still running the
Hi Bert,
Well, this one is, so you must have found a solution.
AB2TC - Knut
Bert Craig wrote
> Test - My messages have not been appearing on the reflector.
>
> Bert, WA2SI
> __
> Elecraft mailing list
> Home:
Anyone have some that they would like to dispose of..?
John Pickett, AD4S
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Test - My messages have not been appearing on the reflector.
Bert, WA2SI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
33 matches
Mail list logo