Hello,
Selling Apple Computer: iMac 20", Intel Core 2 Duo, 1TB HDD, 8GB, Mac OS El
Capitan 10.11
Photos at
https://www.facebook.com/groups/768854923194295/permalink/2414835055262932
If that link doesn’t work, I can send photos.
It's not new, but has plenty of memory and hard-disk space. Comes
That is the way my old TS-570 is but my K3 has only 1 ptt line, but if I am
not mistaken in digital modes the mic is muted. I am not sure of that since
I hardly ever have a mic plugged in, but I think that is what I read in the
book.
Jim Rhodes
K0XU
On Fri, Sep 20, 2019, 09:05 Andy Durbin
Don...
Setting the PA temp to room temp got things rolling. It was reading 30C
when I got to it. No idea how that came about. Thanks much.
...robert
On 9/20/2019 19:07, Don Wilhelm wrote:
Robert,
Check the voltage at KPA100 U1 pins 11 and 12. Then set the K2
secondary menu to PA ON and
sorry abt that. wrong list..
On 2019-09-20 22:38, Bjorn Pehrson wrote:
Jag försökte kasta om GPIO_IN_LOW="gpio18" till GPIO_IN_HIGH="gpio18"
men det blev ingen skillnad så det verka inte vara svxlik som bråkar.
Å andra sidan är spänningarna rätt...
Mysko
On 2019-09-20 22:29, RALPH TURK
Robert,
Check the voltage at KPA100 U1 pins 11 and 12. Then set the K2
secondary menu to PA ON and tap DISPLAY. You should see Fan NOR, Fan
LO-HI, then Fan HI with subsequent taps.
With FAN NOR and the KPA100 quite cool, both U1 pins 11 and 12 should be
at 12 volts. With FAN LO-HI, U1
K2 s/n 5035
KPA 100 Amplifier
KNB2 Noise Blanker
K160RX 160 meter module
KAF2 Audio filter and Real-Time Clock
KI02 RS-232 Interface and Aux I/O
K60XV and Transverter Adapter
KSB2 SSB Option
$1200 plus shipping
Please contact me off list at K8DIO (at) roadrunner.com
Lloyd
Jag försökte kasta om GPIO_IN_LOW="gpio18" till GPIO_IN_HIGH="gpio18"
men det blev ingen skillnad så det verka inte vara svxlik som bråkar.
Å andra sidan är spänningarna rätt...
Mysko
On 2019-09-20 22:29, RALPH TURK wrote:
I can not use the digital modes because I need to switch to Upper SB
Quote from the Elecraft Newsletter"100% Control one K4 from another K4, or from
S/W apps"
How will we turn it on remotely?I've not gotten any answer from Elecraft HDQ on
this Q.
I hope NOT some cheap Chinese aftermarket WIFI power plug switch like the Flex
radios. I hope instead something like
I can not use the digital modes because I need to switch to Upper SB after the
last
electron has been sent in the digital mode and the reverse. Call is instant
break in
between USB voice and digital M110 A
This could be a deal breaker on a K4 purchase.
Ralph, W7HSG/AFA9rt
> On September 20,
I don't understand the problem. When the K3 is set for Digital A, it
sets USB and uses the Line Input. To switch from LSB to a digital mode,
all you need is to change the Mode (the rocker switch). Elecraft radios
can be set to remember settings by Mode, so when you switch, you return
to your
The Elecraft KPA 500 and KAT 500 have been sold and shipped.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
I cannot get the fan in the 100w module to spin at any setting of the
fan control option in PA/SEC/fan. I have not looked back there when
operating, so don't know if fan is spinning up when the amp starts to
get warm. Suggestions? Thanks.
...robert
--
Robert G Strickland, PhD ABPH - KE2WY
Follow up to the Lost Control of the K3 Front Panel PB:
I was able to disassemble the front panel and apply contact cleaner selectively
to the 4 inline connectors and then reassemble the panel. All has been working
fine for the last 4 days now so I am declaring "victory" for the present time.
A feature that should be included in the "K4" is a software addition that will
allow one to
send digital via the rear audio in connector while operating USB (upper
sideband) with the
front mike. I use the current K3+ on AirForce/Army Mars. I need to be able to
switch from
digital (M110A) to
"I need to be able to switch from digital (M110A) to voice on a moments notice
so can not use the digital modes. The mike is hot while transmitting digital.
Most mikes leave the mike element hot. The PTT is a SPST switch. This means
that you have to be careful not to have any noise in the
15 matches
Mail list logo