What is all this Droid stuff?
I am afraid the latest shipping date estimate of 16th December is just too
late for all of us in the UK. The tax applies when it arrives, not when it
was sent. So that is only 2.5% but the Dollar is going up again as well. I
am wondering about cancelling. I have
Don Ehrlich wrote:
I have been reading all of this traffic knowing that I have never had the
problem. Finally, just for the heck of it, I pointed my desk lamp at my
K3
and can see clearly the cracks radiating from the hole in the plastic of
the
audio gain knob.
Well would you
Same Here. After examination under magnification, My #249 has a crack on
the Main volume control knob. It works fine, and I would not have
noticed it unless I checked it with a magnifier.
John KD8K
Mike Harris wrote:
G'day,
I regret to say that under magnification (3x) #345 also has
Has anyone been able to install a TQSL certificate under Windows 7? I have
been trying to get the certificate request to function and ARRL folks have
not been helpful. I get the should work...duh response. Looks like a
security flaw in the TQSL program that taking ownership, or run as, or XP
SP3
Dan, AB3EN,
I don't run W-7, but I had a problem getting LOTW to work with Vista. The
solution was to run it as administrator. (Google run as administrator).
Just a clue, but it's worth a try.
73,
John, W2GW
- Original Message -
From: AB3EN ab...@amsat.org
To:
Dan, are you running 64-bit Win7? Some legacy 32-bit applications
have problems running under Win7-64.
Bill W5WVO
- Original Message -
From: AB3EN ab...@amsat.org
To: elecraft@mailman.qth.net
Sent: Sunday, December 06, 2009 7:05 AM
Subject: [Elecraft] [HAM] Windows 7 and LoTW
Has
Don Ehrlich wrote:
...Not so, and obviously not a problem of a single batch of
knobs...
I think there has been some misunderstanding here. My reading of
Eric's explanation is that the KNOB MANUFACTURER screwed up in a
single batch (or perhaps a few consecutive batches) of knobs.
Typically, with
I've sent this to Elecraft tech but thought I'd post it here too.
My K3, using latest firmware, fails the low power cal on 160. On all bands
the power out doesn't vary with the power knob until the K3 kicks over to
the 100W amp then acts correctly. I've tried, several times, the power cal
using
What firmware rev are you using?
--- On Sat, 12/5/09, Richard Jones - KJ5QY r...@prismnet.com wrote:
From: Richard Jones - KJ5QY r...@prismnet.com
Subject: [Elecraft] K3 Distorted Sound while using AM
To: elecraft@mailman.qth.net
Date: Saturday, December 5, 2009, 9:50 PM
Hello,
I am having a
Hi all,
As we've said multiple times: We immediately replace such knobs on
request. Posting about it on the reflector doesn't count. Please
contacting us directly :)
Tnx
Wayne
http://www.elecraft.com
__
Elecraft mailing list
Hello, using K3 #250 here with 3.63 firmware, etc. Today there was a
V5/DJ on 17m on PSK31. He was calling CQ and listening up. When I tried
to go split I got a SPL N/A. I vaguely remember someone recently
having same issue and I went to the K3 wiki to do a search but could not
find anything.
Hi All,
Just checked some of the knobs and it would seem some of the threads in the
knobs are not parallel and get tighter as the grub screw is screwed further
in. It would seem that a tapered tap has been used on some of the holes and
due to small shaft hole has not been through enough to
If you're using the 2.8 or 2.1 filters for AM mode reception, it would
probably sound distorted. The 2.8 works fine for listening to AM in
SSB mode though.
matt W6NIA
K3 #24
On Sat, 05 Dec 2009 21:50:28 -0800 (PST), you wrote:
Hey Joe,
Thanks for the fast reply!
No, I do not have the AGC
Tom,
You can use RIT or XIT in PSK31. We haven't yet added SPLIT for this
mode.
73,
Wayne
N6KR
http://www.elecraft.com
On Dec 6, 2009, at 7:11 AM, cx...@4email.net wrote:
Hello, using K3 #250 here with 3.63 firmware, etc. Today there was a
V5/DJ on 17m on PSK31. He was calling CQ and
My audio will distort and cut out as you describe if it's a very
strong AM signal (nearly full scale on the s-meter) and the volume is
turned up to that extreme. But that is really loud. I usually have the
AF Gain set at 1/4 rotation or less, so don't really consider it a
problem here. I never
Top posting feels all wrong ;-)
Forget Firewire for this. Firewire is admittedly very good but it's far
from standard on non-apple products and USB3 is going to give it a good
run for it's money in all areas except perhaps Pro A/V where latency is
a huge concern.
However the real issue with
Tom,
Hello, using K3 #250 here with 3.63 firmware, etc. Today there
was a V5/DJ on 17m on PSK31. He was calling CQ and listening up.
When I tried to go split I got a SPL N/A.
Which data sub-mode were you using, DATA_A? Or were you using
PSK_D with paddle transmission?
I have no
The first post I saw about this weeks ago I emailed pa...@elecraft.com and had
replacement knobs in 2 days for 2 radios, FREE. They even apologized for any
inconveniece. The knobs had not failed yet and I take them off every day to
clean them. (joking). Elecraft - you rock!
[Elecraft] [K3]
With all the filter discussions and contest crowded environment etc.
This AM during the 160 contest, I was just tuning and working a
few to give out a point, as I tuned across 1814.0 there was a
10 over 9 6 land station calling cq, and at 1814.35 another 6
land at 20 over 9 calling cq, but
Hi,
I agree with you, Brendan, Ethernet is the way to go. Ethernet is always
transformer coupled so there are no problems with ground loops and that also
helps with noise, although the unshielded Ethernet cables don't help in this
regard. More and more microcontrollers, especially ARM based
I'm installing a KRX3 in K3 #2006 and have a small confusion. I'm on p.
20 of the KRX3 installation manual. I have confirmed that R91 has a
value of about 22 ohms (21.9 on my meter). The 4th step on the page
says that if that is the case, skip directly to the next page. Being
curious, I
All,
I was talking with one of our vendors this past week when he mentioned a
product that their network folks and others used when they had issues
with a circuit board not working as advertised or when it had
intermittent connections.
The product that they use is called Satbilant.
Thanks Ken,
However the link you provided appears to be busted... however maybe
the following link will give readers some usable info:
http://www.stabilant.com/techt02h.htm
73,
Tom N0SS
At 12:17 12/06/2009, Ken Miller, K6CTW wrote:
All,
I was talking with one of our vendors this past
Hi Julian,
I am just reading your emails now as I eat my Sunday morning breakfast.
(Hopefully my wife won't notice I'm reading email at the breakfast
table..) I was not able to read or respond to list postings most of
yesterday (Saturday). Our Elecraft company holiday party was last night
and
I used Deoxit Gold when assembling the K3 18 months ago. So far so good.
Monty K2DLJ
I was talking with one of our vendors this past week when he mentioned a
product that their network folks and others used when they had issues
with a circuit board not working as advertised or when it had
Hi Mike,
If it looks like we can't get the UK K144XV orders out to arrive in time
to beat the 1/1/2010 U.K VAT increase, we will eat it and pay the
difference and discount them by the 2.5% to U.K. customers. This is our
current top priority. Believe me, I want to ship these more than anyone
Dear Eric,
Many thanks for a most generous gesture. This will be much appreciated by me
and your other UK customers for the K144XV.
73 to all,
Geoff
G3UCK
- Original Message -
From: Eric Swartz -WA6HHQ, Elecraft e...@elecraft.com
If it looks like we can't get the UK K144XV orders
On Sun, Dec 6, 2009 at 7:01 PM, Tony McClenny n...@n3me.net wrote:
I need assistance please. My K3 is showing what appears to be a 5 watt RF
output on DATA A only. It allows me to increase power up to 110 watts, if
using CW or SSB.
I assume I have set something to limit the RF when using TX
Shall we assume the answer is no to the below question ?? Anyone out there
know how to do this? Thanks!
Mark M W2OR wrote:
I have a favorite CW paddle that has four SPST mini- spring switches built
into its base, intended to activate cw memories in an external keyer
(which I don't
Mark,
Well, on the basis of anything is possible, I guess one could add
extension wires to the PC board where the M1-M4 buttons make contact.
But I don't believe anyone would really want to do that. There are no
direct access signal lines to the pushbuttons.
However, any pushbutton is
I suspect no one has responded because people are not sure and don't want to
lead you down the wrong path, Mark.
You need to make the circuit closures at your key that the M1 through M4
buttons do on the front panel. To do that with simple switches would involve
paralleling those button contacts
Indeed very generous - thank you Eric.
We will find out on Wednesday our fate for the next year in the budget
statement. It is likely to be tough.
Mike
Dear Eric,
Many thanks for a most generous gesture. This will be much appreciated by me
and your other UK customers for the K144XV.
73
I have just requested a new certificate. I had an error message that mine had
expired when I tried to import into the new Windows 7 system. The error
message was variable though so it might not be that.
Mike
AB3EN wrote:
Has anyone been able to install a TQSL certificate under Windows 7? I
Hi,
Will the PTT line at the mic connector key the K2 when it is placed in the
CW mode ?
Thanks
Jim, VE3CI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hum?
--- On Sun, 12/6/09, DOUGLAS ZWIEBEL doug...@gmail.com wrote:
From: DOUGLAS ZWIEBEL doug...@gmail.com
Subject: [Elecraft] OT: wall wart for RX-only PS?
To: Elecraft Reflector elecraft@mailman.qth.net
Date: Sunday, December 6, 2009, 2:30 PM
OK folks, I do own a pair of K3 and a K2...but I
Merv, KH7C wrote:
[the K3] sure makes for nice DXing on topband.
The ARRL 160 contest brought out a lot of strong stations,
some of whom weren't hearing very well. There were cluster spots
coming in from DX that couldn't get the attention of some of the
stateside CQ'ers. I spotted one W8 who
Doug, KR2Q wrote:
I have a RS wall wart rated at 14 watts (12v, 500ma).
Is there any reason why I should NOT use this as the PS?
Hmm... 12V at 500 mA is only 6 watts-- perhaps the 14 watts
refers to the power drawn by the wall wart while supplying rated current.
If that's the case, then I
Hello Doug,
Most of the wall warts are just rectified AC. Very little if any filtering. I
would not advise it unless you put it across a battery, however, I would be
more comfortable getting a surplus laptop switching power supply and adjust the
voltage down to 13.5 VDC or so. Most of the
Jim,
Yes, indeed it will. If you have the menu INP parameter set to HND, you
will be able to send CW with the PTT button. but if you have INP set to
PDLn, you will send a string of dots (PDLr sends dashes). The PTT input
and the DOT input lines are one and the same inside the K2.
73,
Don
Since Win7 is now the default on all new PC shipments and is seeing
strong acceptance as a upgrade to both Vista and XP I think ARRL
should be eager to help with your problems.
I would suggest calling them.
good luck
jim ab3cv
__
There have been numerous messages about this (not only with Windows
7) on the ARRL-LOTW group on Yahoo. A workaround which seems to help
is to temporarily set the computer to a date just after the
certificate was issued (I haven't had the issue yet, so haven't
actually tried that).
Bob,
I recorded a few seconds of another ham's signal using the DVR so he could
hear what he sounds like on the air. Is there some way I can transmit that
audio segment back out? I couldn't find a way, or find anything in the
archive.
If not, I guess I'll play it, capture to my Mac via the AF out
Interesting as Sgt. Schultz once said. The failure I get is not only on the
tq5 (request) but trying to load the tq6 (cert file). So the time issue
can't be adjusted. I think they have a real turkey in this TQSL cert crap.
Walt from ARRL has tried to help but I suspect they don't have a clue
Hi
Is it possible to send a PTT and,or the CW keying commands to the K2 via
the RS232 port if the K2 has the KIO2 module installed . using software
such as MixW.
Jim, VE3CI
__
Elecraft mailing list
Home:
AD6XY wrote:
Indeed very generous - thank you Eric.
We will find out on Wednesday our fate for the next year in the budget
statement. It is likely to be tough.
To set Eric's mind at rest, the VAT rate from 1st January will
definitely be 17.5%. Any tax rises announced in next week's budget
Dan,
I have Windows 7 Home Premium 32-bit. It is an upgraded system from Vista.
I just uploaded my latest contacts to LOTW without any problem. This is the
first time I've tried it with Windows 7. I use DX4WIN for my log. I used a
filter in DX4WIN to select only the latest entries. I then
Hi,
The K160m module apparently has a second receive only antenna input. Will
this for example, allow me to connect to my 40 M transmit antenna via the
main antenna output on the K2 and receive via a second (quieter) receive
antenna via the second antenna input on the K160M module ?
Jim,
Jim Dunstan wrote:
Hi,
The K160m module apparently has a second receive only antenna input. Will
this for example, allow me to connect to my 40 M transmit antenna via the
main antenna output on the K2 and receive via a second (quieter) receive
antenna via the second antenna input on the
Hello,
The manual is only in English version?
Do you know if will be another languages (Spanish for me) versions in the
near future?
Thanks,
Jorge
CX6VM/CW5W
__
Elecraft mailing list
Home:
Hey Bob,
Sorry for not getting back to the board been a busy day. I have checked all
the wiring. I have tried the 6hz AM filter. This really has me stumped. I
will give Elecraft a call the first part of the week and see what we can
come with.
Thanks,
Rick
Bob Naumann wrote:
Have you
Please don't put questions in the subject. Ask them in the message
text.
Thanks,
Tom, N5GE
n...@n5ge.com
K3 #806 with SUB RX, K3 #1055, PR6,
XV144, XV432, KRC2,
W1, 2 W2's and other small kits
1 K144XV on order
http://www.n5ge.com
http://www.swotrc.net
Shall we assume the answer is no to
On Sun, 6 Dec 2009 14:56:27 -0800 (PST), Oscar, WB5GCX
wb5...@gmail.com wrote:
From the K3 Manual on page 16 Top of page R/H column.
Digital Voice/Audio Recorder (KDVR3)
The DVR can continuously record receive audio
(up to 90 seconds). To start/stop audio record, hold
AF REC . To start/stop
On Sun, 6 Dec 2009 14:21:47 -0800 (PST), Mel Farrer wrote:
Most of the wall warts are just rectified AC. Very little if any
filtering.
We have a lot of power interruptions up here in the Santa Cruz
mountains, thanks to storms, falling trees, and wild fires. Rather
than buy a lot of
Jim,
Yes, set RANT to ON for the band you wish to use a separate receive
antenna. The setting is per band.
73,
Don W3FPR
Jim Dunstan wrote:
Hi,
The K160m module apparently has a second receive only antenna input. Will
this for example, allow me to connect to my 40 M transmit antenna via
This bug in the wattmeter calibration still exists in the latest firmware.
Pressing XMIT during the wattmeter calibration does not transmit, and
pressing TUNE does not permit a change of the calibration paramter. On the
other hand keying the rig via a keyer does allow the calibration to be
Jim,
See the K2 Programmer's Reference for all the commands that can be
sent/received via the K2 through the KIO2 interface. Keying uses the KY
command, and in SSB or RTTY mode, the TX command will set the transmit
state (pulls PTT low).
If your software application can issue those commands,
I'm just trying to figure this out for the first time. What mode (best) does
one use for Search and Pounce on the K3 for RTTY when using N1MM with MMTTY
viewer (No panadapter(yet)) ???
HRD/DM780 works great in DataA mode for general contacts but doesn't have the
log entry panel set up for
What a wonderful radio. Of course, I am preaching to the choir here (well most
of you anyway). The K3 performed well during this weekend's 160 meter contest
with a very simple Inverted-L wire antenna with 20 radials. Worked 6 countries
and 76 Mults with 775 Qs in 11 hours. Missed VI - PR -
The net today had 17 participants, but many signals were not that strong.
We only ran for 13 minutes, and there were no discussions.
Thanks to everyone who checked in. Here is the list of participants.
Station NameQTH Rig S/N
W3HVG Pat PA K1
I think I found at least one of the problems.
If you go into the RX EQ (by clicking the MENU button, then turning the
knob until you see the RX EQ 1). Next, turn the lowest base control
(Number 1) up from the 0 EQ position until you here the distortion on AM.
It will not take much. On my
Thanks Richard,
To me that's an indication the DAC stages are indeed maxing out on LF (near
DC) content.
Either reducing the low EQ or shifting the passband up alleviates this.
Some sort of DC blocking between DSP and DAC could help.
(also for the PB shift clicking effects)
73'
Paul
PD0PSB
61 matches
Mail list logo