wayne has announced some small rit in the past
wayne at Apr.28, 2011
If you use QRQ mode (high-speed CW/ultra-fast break-in), you'll notice
that the latest firmware provides a temporary solution to the problem
of having to turn off QRQ mode in order to use SPLIT, RIT, or XIT.
I just installed KPA rev.1.38 and don't see any difference from 1.37. Both work
very well here (with K3 4.83 and KAT 1.58). I will report if I find anything
not working as expected.
KAT 1.58 removed a software bug in the KAT which meant that the KAT did not
output anything on 28MHz when the
What is the version number of the current KX3 firmware that is available? Sent
from my iPhone this time
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
MCU 1.87 / DSP 1.28 11-26-2013
73 de Hal
la4xx
On 14-02-19, Gerry leary gerrylear...@icloud.com wrote:
What is the version number of the current KX3 firmware that is available?
Sent from my iPhone this time
__
Elecraft
The 'problem' with QRQ CW is that if you are running much over 60 wpm, you have
to seriously concentrate on your copy and sending. I personally, do not require
Split when operating QRQ, but I sure would love to have RIT for at least 0.5kc.
That, for me, would solve the issue. And yes, Elecraft
I would agree with Tommy, some small RIT would be helpful.
It isn't only at 60 wpm that you notice some choppiness, but anything over
30 wpm makes a difference in sending without the QRQ being on. For some
reason this is more evident when using KB
However, in a three way QSO where only
For future reference. See link below.
http://www.elecraft.com/software/elecraft_software_page.htm
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-firmware-question-tp7584433p7584437.html
Sent from the Elecraft mailing list archive at Nabble.com.
Hi Bill - no punishment intended. Your initial reply was OK. I was just
commenting on the very long thread of additional comments.
73,
Eric
List moderator
elecraft.com
On 2/18/2014 4:04 PM, Bill Turner wrote:
ORIGINAL MESSAGE: (may be snipped)
On 2/18/2014 1:14 PM, Sebastian, W4AS
Just a quick comment. I made a purchase using PayPal last night from
a ham friend for a piece of equipment. This is the first time I
have encountered the choice of purchase for friend or family, or
for good and services. I selected goods and services since I was
purchasing something ($30
Using my K3 I was trying to pick up a ZL2 station (New Zealand) around 18.08
MHz this morning (about 9:50 AM PST) when this huge noise blanketed everything
out. It was about 30/9 and absolutely solid across the spectrum shown on the
P3. Using my KPA500, I switched to the 20 meter band -- same
I get this type of noise when my wife uses a laminator.
I also get a lot of sporadic noise in the morning around the time people get up
which I assume are hair driers and curling irons.
It really could be anything, but probably something one of your neighbors has.
Good luck finding it, if
I'm not asking for help fixing anything but just offering this as
interesting phenomena that I encountered.
A couple weeks ago I was running digital sw using the mode JT-65c
(part of WSJT9.3) on 1296 eme and had two Australian stations reply
on a chat room we use for coordinating that my
Phil,
I would suggest that you eliminate sources within your home
as noise sources before you search elsewhere. There are hundreds of
potential noise sources in homes. Just a few examples would be: CFL and
LED lights, low voltage lighting systems, electric blankets, air
I'm always amazed at the number of hams that request additional money if you
pay with PayPal. They like the ability to get the money instantaneously but
feel someone else should pay for this and PayPal doesn't deserve a fee for
their service. Just build it into your price. Just one of my many
One of the items that many overlook is in-freezer ice makers. They
can make a lot of broadband noise when the heater is running. Yes -
heater. Once the ice cubes are frozen they need to be ejected. In
order to do this smoothly, the tray is heated up just enough to let
the cubes pop loose. The
Matt,
Well, then that source of this RFI is ruled out. Ice maker is off and I don't
think it has been on in years -- it may not even work anymore. About the
only time we might need ice is when we have a party of some sort (which is
also rare) that needs ice and we just buy a bag down at the
Folks this thread has been ended by the moderator. Please take further of this
topicdiscussion off list in the interest of limiting OT list overload for others.
73,
Eric
Moderator - really!
elecraft.com
On 2/19/2014 11:06 AM, pkhjr wrote:
I'm always amazed at the number of hams that request
I would find it helpful if the P3 markers A, B center could be made
to extend below the signal line into the waterfall; it would help
to center on the precise desired location to QSY to rather than
guesstimate with the markers being obscured by the spectrum trace on
top.
Thank you,
Gary
Is there a resource on the internet where you can look at different
screenshots and see what the source is for some of the signals that
are translated by the waterfall? I see so many different geometric
forms based on the nature of the Rf and they are a mystery to me. CW
is pretty easy to
If you enable the menu entry WfallMkrs the markers appear on the
waterfall.
Alan N1AL
On 02/19/2014 12:22 PM, Gary Smith wrote:
I would find it helpful if the P3 markers A, B center could be made
to extend below the signal line into the waterfall; it would help
to center on the precise
On Wed, 19 Feb 2014 10:15:42 -0800, Phil Hystad wrote:
Anyone have ideas of the cause.
The first thing to look at is your own house, of course. If you can very
temporarily power your radio from a battery, even a UPS (but not one you are
currently using, just to make sure that isn't the
From your message this sounds like a new one
you've not heard before. If so, let's hope it's
temporary so you won't have to locate it. If new,
unlikely your house or some large facility. If new
and persistent, could be a neighbor has a new TV
or appliance -- or the hospital with some new
Me too, as high as possible. Gets rid of a massive amount of clicks and
transmitted phase noise!
Sorry, couldn't resist.
On 2/19/2014 12:43 PM, mcduf...@ag0n.net wrote:
My favorite trick is to toss a small radio like a IC706 up
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
Just be careful it doesn't land on your head: The
706 is not what I would call a small radio.
Better to use a KX1 (had to get an Elecraft rig
into this to make it On Topic) :-)
73, Phil w7ox
On 2/19/14, 1:25 PM, Vic Rosenthal K2VCO wrote:
Me too, as high as possible. Gets rid of a
massive
It is hard to describe this noise because it lacks any features at all. Think
of atmospherics, like background noise that usually sits around S0 to S1 on the
S-meter, more on 80 meters in the evening. That sort of thing.
Now, make that noise a solid (no changes, no peaks, no features,
Based on my past experience - I would be thinking an arc welder (or wire
or some such similar). If not that, then you might want to check for
carbon trails on HV insulators along the road (usually very effected by
the weather). As a third guess - and a worst case scenario - a serious
problem
On 2/19/2014 2:23 PM, Bill W2BLC wrote:
If not that, then you might want to check for
carbon trails on HV insulators along the road (usually very effected by
the weather).
When we suspected a power line leak, the noise was usually continuous,
not intermittent.To verify which pole it came
How do you recommend he go about eliminating the
latter, which appears to be a nearby neighbor? ;-)
73, Phil w7ox -- K2#380, K1#18, K3/P3 shipping
this week :-)
On 2/19/14, 2:23 PM, Bill W2BLC wrote:
Based on my past experience - I would be
thinking an arc welder (or wire or some such
All of our electricity comes out of the ground. Everything is underground here
except for a few poles a number of blocks away. I have heard that kind of
noise before from insulators (dirt, carbon, etc.) and this is definitely not
that.
Besides, that would just not have this exact on off
I'm beginning to like that arc welder theory.
73 de Ray
K2ULR
On Feb 19, 2014, at 5:48 PM, Phil Hystad wrote:
All of our electricity comes out of the ground. Everything is
underground here except for a few poles a number of blocks away. I
have heard that kind of noise before from
I can't tell you what it is, but I can describe a few things for you:
Neighbor has a plasma TV. The noise is very broad and at low P3 spans
looks just solid as you describe. With a 200 KHz span, you can clearly
see the changing video, it's very apparent. Plasma TV's radiate off the
screen,
In my case, I walked next door and explained that his Plasma TV was
interfering with my radio reception. I then asked him to come to my
shack to see what the problem was. I showed him the signal from the
PTV on my monitor which is connected to the P3 and asked if we could
go to his home and turn
I had local power line noise
so
Send a letter / form you can download from the ARRL to both CalTran and
the FCC local office
you will get results,, send to the in charge office of caltran
spend a buck and use USPS ceritfied letter with a return rcpt
it works
Bob K3DJC
My current noise source
So how did he eliminate the noise from the PTV?
Phil w7ox
On 2/19/14, 3:57 PM, Amateur Radio Operator N5GE
wrote:
In my case, I walked next door and explained that his Plasma TV was
interfering with my radio reception. I then asked him to come to my
shack to see what the problem was. I
Maybe he took it back to the store where he purchased it and got a
refund. That would be the best outcome.
73 de Ray
K2ULR
On Feb 19, 2014, at 7:22 PM, Phil Wheeler wrote:
So how did he eliminate the noise from the PTV?
Phil w7ox
Hi Bill and everyone else,
Following up on this email, I got the prototype boards and and assembled
one and it's working like a champ. Here's a demo video of what I'm calling
PigPad (for now).
http://youtu.be/lhVeHNsSzyI
73,
Nick
N3WG
On Sun, Feb 2, 2014 at 2:12 PM, Nick Garner
On 2/19/2014 12:00 PM, elecraft-requ...@mailman.qth.net wrote:
When working split, is there any reason why I have to be
able to decode both the DX (or split station [i.e. W1AW/x]) and the
calling station?
There is plenty of reason to be able to decode both the dx station and
the callers. It
I suggest you contact your electric utility. Most utiltiies have a
power quality department, and in general the staff are *very* well
equipped and trained to locate RF noise if it's on their system. Some
utilities call this their Amateur Radio division or department.
Years ago, I had symptoms
My experience in Virginia and in New York was excellent with the power
companies. Their quality control section had a couple of hams as team
members - meaning we all spoke the same language. It might pay to ask if
any team members are hams. Utility companies are loath to electricity
loss,
I'm trying to get my K2 (SN 5711) working on digital modes, initially
just WSPR. I have the fixed audio output wired to pin 5 of the Mic
header, going to a Signalink USB which is working fine. Audio in/out,
keying, all just fine. If I transmit on WSPR my signal is being heard on
80m whether
It occurred to me that the P3 might be made into a decent 200KHz wide RF
spectrum analyzer (note analyzer, not display) with the addition of N
trace averaging (n, infinite).
I use my K3 as test gear as well as for operating. With an elementary
sweep generator, K3/ROCKY almost works as an RF
That is a 10 kw commercial stn.It's located in Germany. It sends wx
other info to ships at sea. I use it as a prop. beacon on 30m.
K9IL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
On 2/19/2014 3:57 PM, Amateur Radio Operator N5GE wrote:
I then asked him if he was experiencing interference from my radio
transmitter, to which he replied no.
Problem solved.
Ummm ... and how? This is the conundrum [or maybe fallacy] in Part 15.
Unsuspecting and un-knowledgable
Nick:
I like it!
Brian KB1VBF
Sent from my iPad
On Feb 19, 2014, at 7:29 PM, Nick Garner nwgar...@gmail.com wrote:
Hi Bill and everyone else,
Following up on this email, I got the prototype boards and and assembled
one and it's working like a champ. Here's a demo video of what I'm calling
Dennis,
First a clarification - if the band is below 15 meters, RTTY is LSB and
RTTY REV is USB.
You don't have to worry about that on bands above 15 meters because the
K2 automatically makes the corrective swap, but when aligning the
filters, use a band below 15 meters so as not to mix the
Brian,
Not a goofy idea at all, the P3 can be used in that fashion, as can any
SDR receiver that covers the frequency range that you want to investigate.
73,
Don W3FPR
On 2/19/2014 10:27 PM, Brian Alsop wrote:
It occurred to me that the P3 might be made into a decent 200KHz wide
RF spectrum
Unless the circuit has been changed since my radio, I seem to recall two diodes
in series in the path to the 12V out jack. A silicon diode can drop the
voltage .7 of a volt (times two).
Dick, n0ce
- Original Message -
From: Alan Bloom n...@sonic.net
To: elecraft@mailman.qth.net
Sent:
47 matches
Mail list logo