Hi Folks
I'm using the K3/0 mini with a K3 on the base and remoterig.
This setup added with a ACOM 2000 plus DB-42 in on the air for 2 years now and
it is working extremelly well
I´m very active in the CQ DX Marathon and without the remote station I would
have no condition to be competitive.
I've been using the Remote Rig interfaces with my K3 for several years and
the K3/Mini for the past 6 months or so. I'm a big fan of the Remote Rig
devices, not a fan of the K3/Mini.
I started out doing remote operating with the K4VV group using an all
software approach and the Remote Rig devices
I have used the RemoteRig with a K3/0 (not the mini) to a K3/KPA500 combination
and a SteppIR vertical. It works fine, but the RX audio is certainly not a
strong as directly through the RemoteRig.
As others have noted this not quite plug and play and some tweaking of the
parameters is
Jim,
Nice review. Sounds like you have a configuration very similar to my
own. I recently put together a case system for transporting my
KX3/PX3/KXPA100 setup on car trips for remote operations. I have a bit
more to take with me as I do mostly digital modes. For what it's worth,
you can
Hi Larry,
I have a description of the tuning procedures that the KAT500 goes through at
http://www.ke7x.com/home/kat500-and-kxpa100-tuners that you might find useful.
Cheers and 73,
Fred KE7X
Author of:
The Elecraft K3: Design, Configuration and Operation 2nd ed
The Elecraft KX3 - Going for the
I’m reposting this in case you missed it. I have a KAT2 for sale from the SK
estate. $113. Picture upon request.
73,
Carl Yaffey K8NU
Recording studio.
cyaffeyno_s...@gmail.com
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com
No kidding, I was thinking of suggesting this as well...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
Good perception, Jim... experience pays off. We had this same problem
with Andy, K2LE. We have two remoterig remote ends connected to the same
common remote station. My audio has been flawless. Andy kept having poor
audio -- muffled, microphonic sounds but no clear audio. It turned out to
be
I've been using the K3/0 mini for about a year for casual DXing and for
many contests.
The K3/0 mini is perfect -- a mirror of your K3. Once you get used to the
the fact that
you are setting menus on the Remote radio, all will be good.
The mix that is important is how you use the K3/0 to
I recently upgraded my portable radio from an Elecraft KX1 to a wonderful KX3.
I no longer need the KX1. The serial number is 2500 and it is complete with the
Elecraft mini paddle, ATU, battery tray and the 30/80 adapter. I did not do the
build, but I think Don, W3FPR did. In any case, he did a
I bought a KX3 and PX3 with a view towards using them with an external high
performance transverter for 144MHz (with an IF of 14MHz). My main interest
being weak signal operation on VHF. The ability to use the I/Q outputs with a
sound card or PX3 and the excellent receiver performance in
On Wed,5/27/2015 3:04 AM, John K3TN via Elecraft wrote:
Others have had the same audio issues, others just naturally connect their
headset to the RemoteRig, others have had no problems with the Mini - your
mileage may vary.
Hi John,
I know nothing about these products other than a vague one
Just curious if anyone has yet received a confirmation of orders placed
at Dayton?
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I don't have either a KX3 or PX3, and my 2m work is limited to FM, but
the problems that you describe could be due to various fixable problems.
For example, some P3s had spur problems due to bad electrical contact
between parts of the enclosure, as well as improperly attached BNC
connectors on
Dan,
I bought an XG-3 at Dayton. I had my confirmation by Tuesday afterward. Eric
took my order and Lisa did some follow up paperwork for me.
73,
Barry
K3NDM
- Original Message -
From: Dan Atchison via Elecraft elecraft@mailman.qth.net
To: elecraft elecraft@mailman.qth.net
Lisa just corrected me - They have everything entered and confirmed except the
P3TXMON orders. Those are going in next and will take at least through this
weekend or early next week. We had a ton of those too.
Eric
elecraft.com
On 5/27/2015 5:03 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Lisa
Lisa and her team just caught up with entering everything from Dayton today.
Whew!
Contact her at sa...@elecraft.com if you placed an order at Dayton and have not
yet received an email order confirmation.
Eric
/elecraft.com/
On 5/27/2015 3:30 PM, Ian wrote:
Got mine today.
73, Ian N8IK
yup. I am seeing this on FSK441 and Data A mode. I recently acquired a
power meter that shows average and peak power and I am getting getting PEP =
1.8 times average on this data mode. Traced it to the K3 audio response on
transmit. I am using the 8 pole SSB filter. It seems the 882 Hz and 1323
On Wed,5/27/2015 10:26 AM, David Anderson wrote:
Unfortunately it looks like this is not going to work out for me, as the level
of radiated noise at VHF from both the PX3 severely masks weak signals, there
is also a huge radiated birdie from the KX3 near 144.4MHz.
Questions and observations.
The suggestion is to use the two identical receivers in the K3 to null
noise and interference. The idea is to connect each receiver to a
different antenna so the signals arrive with different phases. The
phase difference will generally be different for the desired signal and
the interference
Got mine today.
73, Ian N8IK
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dan
Atchison via Elecraft
Sent: Wednesday, May 27, 2015 15:47
To: elecraft@mailman.qth.net
Subject: [Elecraft] Dayton Orders
Just curious if anyone has yet received a
21 matches
Mail list logo
