John N0HJ and Steve N0MHQ joined me Saturday afternoon on the deck of
our recently-purchased home in the mountains of Woodland Park, CO to
make a few FD contacts with my KX3. First time I've had the chance to
get on HF since last fall, thanks to all the activities associated with
selling one
Worked field day this year with my KX3 setup on 80 15 meters.
Nice to be able to operate CW Digital SSB simultaneously on the same band
with very small antenna separations.
Thanks Elecraft for the bata Fixed mode for the PX3, worked well, however I
would like to see an adjustment added that
I used the KX3 on 40 meter CW and PSK31 with Win4K3 software, DigiPan, an
HF Packer Amplifier and 40 meter Loop Skywire at the River City ARCS Field
Day in Rio Linda, CA.
The power source were 105 Ah of sealed lead acid batteries and 90 watt
solar panel.
Some photos are at
Both the KX3 and the IC-7000 have been sold. Thanks for playing :)
B
On 6/30/15, 6:54 AM, Brian Sheets bri...@fl240.com wrote:
I need to fund the downpayment on a new (to me) vehicle so the KX3 has to
go.
Factory Built Serial Number 1366
Excellent Condition Current Firmware
Non-Smoker owned,
I, too, ran my KX3 for FD: 5 watts, battery power. From LAX I was able
to work both Hawaii and the East Coast. Amazing what 5 watts and CW can do.
--Jeff, K6JW
__
Elecraft mailing list
Home:
I need to fund the downpayment on a new (to me) vehicle so the KX3 has to go.
Factory Built Serial Number 1366
Excellent Condition Current Firmware
Non-Smoker owned, no scratches dents or otherwise
Gem products side KX endplates dust cover (original end pieces included too)
Think Tank padded
Dear all,
my K3 (S/N 8862) is developing a strange behaviour that is beginning
to worry me a bit... Current firmware, assembled as kit, power
calibration just repeated to be sure.
First -- and this is not really new -- from time to time it produces
a smell that is best described as 'hot', like
possible issue in the Low Pass Filter
From: Felix Hormuth horm...@mpia.eu
To: elecraft@mailman.qth.net
Sent: Tuesday, June 30, 2015 8:16 AM
Subject: [Elecraft] K3 PA temperature reading jumps / hot smell
Dear all,
my K3 (S/N 8862) is developing a strange behaviour that is
The 20 meter temperature increase sounds normal to me. The 10
MHz and 21 MHz behavior is a little strange. Here is a link to a
PA temp experiment that I conducted on both of my K3's:
http://marc.info/?l=elecraftm=128534687205664w=2
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
Ted,
Just a couple of comments:
Our 2A station used a barefoot K3 throughout FD 2015. This one is a
newer unit (#7811) with recently-installed KSYN3As. We operated QRQ
100%, at around 25 WPM for 17 hours. I noticed the same improved
performance you did. I'd used an older K3 (#24) with new
In recent testing of a new Cloud-IQ SDR, I found the same thing at home.
Two tones about 500 Hz apart and reoccurring at about the same interval.
I used my KX3 to track it down to the 100BASE-T ethernet cables. The noise
floor on the SDR is 140 dB and was able to pick it up.
73
Mike N4MHO
On
On Mon,6/29/2015 9:26 PM, Steve Lund wrote:
I have received the ferrites recommended by K9YC. The plan is to install
them on Wednesday. I have both the #43 and #61 material
Hi Steve,
A clarification. #31 is the first weapon of choice for the HF bands --
it is effective from the AM broadcast
The usual K2 headphone jack failure results in the speaker going dead. To fix
it requires replacing the jack, but a workaround is to short two pads together.
The speaker will then run all the time, whether or not there are headphones
plugged into the front of the rig. The speaker can be cut
Hmmmmailman and Yahoo between them have managed to mangle the links...they
should be http://www.qsl.net/ve3sma/downloads2.html , while the photo itself
is at http://www.qsl.net/ve3sma/K2HeadphoneJackSwitchBypass.jpg . Hope that
works better. Steve VE3SMA
Hi guys,
currently stripping down one of my K3's for a friend thus have a few
original Elecraft high performance 8 pole filters surplus to my needs now.
Available for sale:
KFL3A-250
KFL3A-400 (2 pieces)
KFL3A-1.0K
KFL3A-2.8K
Asking 99 EUR each, Europe/Germany preferred but will also ship
Nope, in the email I received your links work just fine.
Mark AD5SS
On Tue, Jun 30, 2015 at 3:14 PM, Steve Kavanagh skavanag...@yahoo.ca wrote:
Hmmmmailman and Yahoo between them have managed to mangle the
links...they should be http://www.qsl.net/ve3sma/downloads2.html , while the
Two of us shared a K3 on CW. There were four other HF stations on digital
modes with very little antenna separation. We were never even aware that
the other stations existed in the same building. QRM was not a problem
unless multiple stations moved within a few Hertz of our receive
frequency.
17 matches
Mail list logo