Hi Don,
As you say "many ways to skin the cat" :-) Thanks for that last tip, hadn't
thought of that and will work as well of course!
Barthold
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: Wednesday, September 14, 2016 9:35 PM
To: Barthold Lichtenbelt;
What me worry?
Begin forwarded message:
> From: ElectricBike.com
> Date: September 14, 2016 at 7:33:55 PM MDT
> To: phi...@mac.com
> Subject: [New post] Ebike charging for long Battery life
>
>
> New post on ElectricBike.com
>
>
> Ebike charging for long Battery
Ed,
The internal soundcard in the K3S should show up as a separate USB
soundcard (Codec) in your computer.
73,
Don W3FPR
On 9/14/2016 8:43 PM, Edward R Cole wrote:
I confess I do not use WSPR-X very much but I checked my version and
the K3s is not shown in setup. Plenty ways to chose a com
Barthold,
Another way to accomplish that is to power off the KPA500 and bypass the
KAT500. Then the K3 will display the SWR. There are several ways to
"skin that cat".
Actually, if you 'train' the KAT500 to your antennas and want to monitor
the status of your antennas, put the KAT500 into
Hi Don,
Ok, this all came from Dick saying that you can see the "bypass SWR" that
the KAT500 measures with the PC utility. But if you don't have that hooked
up, a simple trick seemed to be to put the KAT500 in bypass mode, and see
what the KPA500 tells you on its SWR led bar. That can give you an
I fly RC helicopters and use Power Poles on all of my connections. My motor
draws 75A with spikes over 100A. The model experiences broad frequency
vibration, direct exposure to heat, cold, and moisture. I've never had a
failure of a connection, an inadvertent disconnection, or wore one out.
First off use DATA A not USB.
Sent from my iPhone
...nr4c. bill
> On Sep 14, 2016, at 9:05 AM, MaverickNH wrote:
>
> I've used that in my set-up of app and rig, but no go. I might be missing
> something simple as a K3S newbie. With USB as mode, and VOX enabled,
I confess I do not use WSPR-X very much but I checked my version and
the K3s is not shown in setup. Plenty ways to chose a com port and a
soundcard, but one does not use a computer soundcard with the K3s
connected via USB port.
Just wondering if this could be the issue? I see you can chose
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Dear All,
I have a KPA500 and a KAT500 for sale. Both are in mint condition and very
lightly used (I use an Alpha 9500 when I need an amp).
KPA500 - $2,000 delivered and insured (cables included);
KAT500 - $600.00 delivered and insured (cables included).
Please email me directly at
Barthold,
If the KAT500 is in bypass you should see a similar SWR indicated on
both the KAT500 and the KPA500.
They may not be exactly the same due to component tolerances in the
wattmeters.
I am not sure what your goal is in asking that question. If it is a
quick check on your antenna
The output (to the computer) is stereo, and the sub's audio is sent on
the right channel (assuming you have a sub installed). The USB line in
is mono.
73,
matt W6NIA
On 9/14/2016 1:59 PM, Jim Cox wrote:
Is the internal USB soundcard stereo or mono? IE is the sub receiver audio
sent to
Actually, it doesn't. Slap a flat plate over the end of a zero length waveguide
and the SWR is infinite. Insert whatever you want in front of that and the SWR
may measure something different, but it's still infinite:-)
On 9/14/2016 1:11 PM, Michael Walker wrote:
inserting an SWR meter
Is the internal USB soundcard stereo or mono? IE is the sub receiver audio
sent to the computer as well as audio from the main receiver? 73s Jim K4JAF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi Don,
I meant if the KAT500 is in bypass mode, what will the SWR meter on the
KPA500 show?
Thanks,
Barthold
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: Wednesday, September 14, 2016 2:26 PM
To: Barthold Lichtenbelt; 'Dick Dievendorff'; 'Joe K2UF';
Barthold,
No, the KPA500 will see the SWR at the *input* to the KAT500, and that
is what it will display.
The tuner will attempt to create a low SWR when it tunes.
The output side of the KAT500 will be the SWR that is presented by the
antenna feedline.
The KAT500 Utility will show you that
Without seeing the entire diagram, SWR is not a consistent value throughout
the feedline. We actually proved this a one of my classes back in
college. I can't remember how many jumper cables I made to up to this test
at 100Mhz. All different wavelengths and random lengths as well.
Let me
> The KAT500 Utility will show the "bypass VSWR", which is the SWR observed
by the ATU when it is in Bypass.
As will the SWR meter on the KPA500, right?
Barthold
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick
Dievendorff
Sent: Wednesday,
Bret,
One more thing - if you are using the K3S internal soundcard, make
certain you do not have anything plugged into the LINE IN jack.
A plug in LINE IN overrides and disconnects input from the internal
sound card.
73,
Don W3FPR
If your TX sensor is in line after the KAT500, you might be observing the
SWR of the antenna side of the ATU. The KPA500 and KAT500 LEDs show the SWR
at the transmitter side of the ATU, rather than the antenna side.
The KAT500 Utility will show the "bypass VSWR", which is the SWR observed by
the
Fred, If you have the PigRemote it will serve as the RS-232 connection from
iSdr to the KX3. If you do not then then just set the frequency on iSdr to 0
(zero) kHz and the frequency you are tuned to will be at center screen and
other signals will be displayed as plus or minus kHz. It works
Where is the TX sensor located? It should be between the KPA500 and the
KAT500. It sounds like you have it in-line after the KAT500.
Mark, WB9CIF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
K2UF
Sent: Wednesday, September 14, 2016 6:49 PM
I am aware it doesn't require any SDR software, but wanted to play with
some.. primary for a panadapter, without adding on a PX3.. I have not
looked at iSDR for ipad will take a look at it.. thanks.. Fred
On 9/14/16 2:54 PM, Michael Blake wrote:
> Fred, what is your goal? The KX3 does not
In addition to Wayne's talk at the San Mateo club this coming Friday night,
there will be a demo booth and talks available elsewhere in the US:
W9DXCC in Schaumberg, Illinois, this weekend:
We'll have a full booth of demo gear including all the lastest options
available during the show on
Fred, what is your goal? The KX3 does not require any SDR software.
Panadapter, try iSDR on the iPad. If you have a PigRemote it will even display
the KX3's frequency. It connects to the I/Q jacks.
Fill us in what functions you are looking for.
Michael Blake
k9...@mac.com
> On Sep 14,
Bruce, won't that give you a stiff neck from bending over to talk into it?
My MH3 cable is quite a bit longer.
Bill
K9YEQ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bruce
Nourish
Sent: Tuesday, September 13, 2016 10:25 PM
To: Elecraft
Using my K3/KPA500/KAT500/P3+SVGA with the TX sensor in line.
On the KPA500 the SWR reads 1.3 with one or two SWR led's lit also one or
two led's lit on the KAT500 but the SWR display on the P3 shows about 6.
Any ideas why this is happening?
Joe K2UF
I am looking for recommendations on a good SDR application that will run
under Mac OSX. I also have parallels installed with a windows VM, but
don't want anything that runs under windows..
What are you Mac users using?.. Fred
--
Fred Moore
WD8KNI
email: f...@fmeco.com
phone:
Record and share? Or stream live? That would be cool.
On Wed, Sep 14, 2016 at 11:13 AM, Wayne Burdick wrote:
> Hi all,
>
> If you'll be in the San Mateo, CA area on Friday night, and your social
> calendar isn't quite full, we'd love to see you at the San Mateo Radio Club
>
Bret,
How do you have the LINE IN level set? Try increasing it to see if you
can get a waterfall display.
73,
Don W3FPR
On 9/14/2016 11:35 AM, Charles wrote:
Hi Don - I'm running on a K3S rather than a KX3 so working with the
internal sound card..
I switched to DATA Mode and Data A but
X2
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX2-KX3-talk-this-coming-Friday-night-tp7622473p7622474.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
How about recording this, for those of us who don't fly and are on the
east coast.
Ken , WB2ART
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi Don - I'm running on a K3S rather than a KX3 so working with the internal
sound card..
I switched to DATA Mode and Data A but WSPR-2 shows no Rx, there is no signal
apparent on the waterfall.
BRET
- Original Message -
From: "Don Wilhelm"
To:
Thanks Nick,
Very handy tool, nicely done like all your stuff.
Suggestion: Please allow frequency entry with common suffixes like k, M,
G etc instead of the error prone entry in Hz or allow scientific
notation like E3, E6 etc if that is more convenient from a field parsing
point of view.
73
Hi all,
If you'll be in the San Mateo, CA area on Friday night, and your social
calendar isn't quite full, we'd love to see you at the San Mateo Radio Club
meeting. I'll be doing a talk on portable and hand-held operation, with
application to the KX2 and KX3 transceivers. The meeting is at the
It is too bad they want $31US to ship to Canada.
Mike va3mw
On Wed, Sep 14, 2016 at 10:09 AM, wrote:
> http://3gstore.com/products/107_view_all.html
>
> Control this from your phone. Works well and only $100.
>
> Also look for APC remote switched power strips on eBay. Some
http://3gstore.com/products/107_view_all.html
Control this from your phone. Works well and only $100.
Also look for APC remote switched power strips on eBay. Some models let you set
automatic schedules.
Happy to answer questions off list: wn3r...@gmail.com
73, Dick, WN3R
Many of the IP remote power switches (I use DLI) also have a backup control
available via a POTS telephone hardline, plus a ping function to do a reset.
73 John N5CQ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Wednesday,
Don, also true with Mac OS X and is how I have mine set up for remote operation.
73 - Mike - K9JRI
> On Sep 14, 2016, at 9:39 AM, Don Wilhelm wrote:
>
> The problem with the remote PC hanging up can be handled by removing the PC
> power with a remote AC switch
I alluded to those clips when I said, "And there are ways/devices to
make PP connections "more secure".
It was my intention to clarify that statement with a link to the
clips... Apologize. I was on vacation and become distracted and hit
"Send" too early. :-)
__
Clay
The problem with the remote PC hanging up can be handled by removing the
PC power with a remote AC switch and then turning it back on.
Set up the PC to automatically log on and launch the remote control
application at startup. If you do not know how to set that up for your
OS, google will give
Nice job! Next comes all the utility of chaining macros together - you
are only limited by your imagination (or lack of). So far so good on my
Genovation keypad and K-pod. Macros make the K3 for me - no other rig
can compare, except perhaps for the K3S.
Now, if I could just write a macro to
Where do you have your soundcard level set? Set it at the 75% point or
a bit higher.
One "eccentricity" of the KX3 is that *if* the audio input is too high
the KX3 will protect the audio input by shutting it down. Start with the
MIC GAIN at a low level and bring it up slowly until you find
Is there a way to mute the internal speaker on the K3 mini? When I plug in my
external speaker (much better audio quality), the mini speaker is still active
so get an undesirable “stereo” sound.
Using the mini with RRC to the K3.
Jim
W2SM
I've used that in my set-up of app and rig, but no go. I might be missing
something simple as a K3S newbie. With USB as mode, and VOX enabled, perhaps
Tx is not enabled? When the app goes to Tx, or it do a Tune from the app,
the K3S Red TX LED comes on, but ALC doesn't budge.
--
View this
Awesome! Nicely done.
On Tue, Sep 13, 2016 at 6:32 PM, Ron D'Eau Claire wrote:
> Neat!
>
> 73, Ron AC7AC
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nick
> Garner
> Sent: Tuesday, September 13, 2016 2:59 PM
> To:
I had one of the original ones and was not impressed. Never had any success,
always did better with random wire or dipole. Picked up a used BuddiStick
and it seems to be a better built antenna than the SuperAntenna.
73 Tex
ka5y
--
View this message in context:
Power pole connectors are okay but they do break!
When you use the K3's Tilt Stand the power cable will lean on the desk surface.
If you for any reason lift the K3 at the front any higher the sideways pressure
on the Power pole
connector can break its housing and the spring in the connector is
Has anyone used a New Super Antenna, http://newsuperantenna.com/ ? With their
Elecraft rig?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New-Super-Antenna-OT-ish-tp7622456.html
Sent from the Elecraft mailing list archive at Nabble.com.
49 matches
Mail list logo