[Elecraft] WTB: PX3

Looking for a PX3, if you have one for sale please send details to include age, condition and price sent priority mail ti zip 45324 Please contact direct to n...@woh.rr.com , also prefer to pay by paypal. ThanksTimNZ8J __ Elecraft

Re: [Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

Are you connecting the amplifier to the TX Inhibit pin of the K3 ACC port? Do you have CONFIG:TX INH set to Low=Inh or Hi=Inh? You must first set CONFIG:TECH MD ON to see it. Try changing TX INH to OFF. >From the Expert 2K-FA manual, section 13.3: "All modern transceivers have a delay before

Re: [Elecraft] Interesting meter

The first question that comes to mind is “How do we know that SWR stands for Standing Wave Ratio?” David K0LUM > On Jul 13, 2017, at 10:22 PM, Howard Hoyt wrote: > > Hi all, > > I figured maybe one of you was, um, experienced enough to recognize this > meter and let me

[Elecraft] Interesting meter

Hi all, I figured maybe one of you was, um, experienced enough to recognize this meter and let me know what piece of equipment it came from. I found it in a cache of old broadcast equipment, so it is possible it was part of an old carrier current transmitter or some other such thing. This

Re: [Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

Thanks guys for your fast answers and suggestions. After having read you, I made several tests. I have observed some very strange things leading me to think that the K3 USB by itself is not involved: The problem occurs only when the amplifier (Expert 2K-FA) is in operate mode and whatever

[Elecraft] K3 NR and KIO3B INTERFACE

  Last year we upgraded one of the K3's with the installation of the KIO3B interface kit. Shortly after we noticed that the NR sounded different. Like an "echo", even on the least aggressive setting. The NR performance appeared to have significantly suffered. Coincidence with the KIO3B

Re: [Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

I did not experience any problems like that during 24 hours of the IARU contest keying a pair of K3S rigs with Win-Test over the USB line, in full QSK mode, on a single computer (which was running Windows 7 32-bit). With Win-Test's excellent software CW timing, there's usually no need to buy a

Re: [Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

It's possible that Windows 10 is powering down the hub that the device is connected to. In the Windows 10 Settings dialog click on devices and scroll all the way down to the bottom and select Device Manager. Then click on USB controllers to open and view all the hubs. Double click on each

Re: [Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

Gilles, As long as you are dependent on an application running on the PC for timing, you will have similar problems. Windows prioritizes the timing of events to its own pleasure, and servicing the application is not necessarily of the highest priority. It is normally not noticed, but with

[Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

Hi all, Last WE during the IARU HF I have tested the use of the USB input of the K3S in replacement of a RIGEXPERT TI-5 box. Everything looked great until I experimented that sometimes randomly the beginning of the first dash or dot was missing when sending CW via Wintest under Windows 10.

Re: [Elecraft] K3 with 2m tvtr - power control feature request

Thanks to everyone who answered this both private and public. To recap, I'm using the internal 2m transverter K144XV and trying to reduce the output on 2m below 1W whilst keeping the max of 10W. I conclude: * the 2m internal tvtr cannot be adjusted to produce both 10W out max and 1W

Re: [Elecraft] Just a test

Hi Don, It is indeed very quiet nut the reflector is working just fine. As you said, it looks like everybody is on a vacation. State parks typically have no Wi-Fi. Knut Don Wilhelm wrote > I have not seen many posts on the reflector in the last couple days. > Just wondering if everyone is on

[Elecraft] no longer interested in buying a K-2

I managed to repair my Yaesu FT-747SX so I'm not needing a K-2. Thanks to all who replied. Mark--K8LD-- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] Using a KX2 with an SP3 external speaker ?

I use a 15 W per channel amp that runs off of 12 V. It costs about $10 (price varies) from Amazon. I wrote it up on my blog. https://observer.wunderwood.org/2017/03/04/speakers-for-my-elecraft-kx3/ This amp and the one

Re: [Elecraft] Head phone/speaker question, time set

Just be sure your computer clock is updated before doing this. I use this method frequently by allowing the computer to automatically and electronically update to a time standard. The Utility is free for download from the Elecraft website. Also I use the utility to store the latest

Re: [Elecraft] Head phone/speaker question, time set

You can use the K3 utility to set the clock. Select the Configuration tab and there is a button at the bottom labeled "Set K3 Date and Time". Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rick Stealey Sent:

Re: [Elecraft] Head phone/speaker question, time set

Gene, On the clock thing, tap 2 to change the minutes, 3 to change the seconds. Rick K2XT From: elecraft-boun...@mailman.qth.net on behalf of Gene O Sent: Thursday, July 13, 2017 2:37:36 AM To:

Re: [Elecraft] Using a KX2 with an SP3 external speaker ?

Phil, I use the West Mountain Radio COMspkr. They are modestly priced stereo speakers and are "RF proof". The stereo pair allows listening to both sides when Dual RX is turned on and you are operating SPLIT. 73, Don W3FPR On 7/13/2017 1:55 AM, Phil Hystad wrote: So far, I have mostly

Re: [Elecraft] Using a KX2 with an SP3 external speaker ?

Phil, I use a little 7W mono amp from MCM electronics that gives plenty of punch into a small comms speaker. I've tried it with the SP3 also - works just fine. I also use one with my KX3 on my 10/24GHz portable rig. It's part number 809077 at MCM here