Hi Bob,
You're seriously overthinking this, perhaps due to a failure to RTFM. On
sideband, Elecraft firmware automatically defaults to the "right
sideband" for each ham band. If you choose either of the RTTY modes, it
will default to LSB. If you choose DATA A, it will automatically switch
to
I’ve never got my T1 to work. I’m looking for someone who could verify it is
defective.
K9BWE, Jerry. 847 255-9775
Anyone who can make you believe absurdities
can also make you do atrocities.
Bob,
I suggest you set up SSB as you want it - Compression and TX EQ as well.
Then for digital, use DATA A - it automatically turns off compression
and TX EQ.
All that can be accomplished with VFO A, no involvement with VFO B
unless you invoke it.
Know that a double tap of A>B will transfer
A number of people have asked what I am trying to do with the macros, so here
is a quick explanation. In a normal day I'm switching between CW, digital and
sideband frequently. CW is easy: VFO B is always set the way I want it for CW.
Digital and sideband have to share VFO A (too bad there
Boy, that was fast. Item spoken for. Will repost if sale falls through.
Doug W5JV
Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.
From: Doug Hensley
Sent: Friday, April 16, 2021 6:54 PM
To: elecraft@mailman.qth.net
Subject: OT For
Since many people on this list have more than one QRP rig, I thought I
would make this available here:
A new condition HF Packer 160m - 10m amplifier. 2.5w in / 35w out.
Pictures on request. Price of $350 set by Virgil who designed them and
built this one for the SK who owned it.
Thanks,
Bob,
I believe you are ignoring the ALT button (hold of the left side of the
Mode button).
Why use a Macro? Set the K3 to SSB on the band of interest and change
the mode with the MODE button to select SSB the normal sideband for that
band, If it is not correct, hold the left side of the
I’ve been trying to set up a macro to automatically choose the correct sideband
(USB/LSB) for the current band but have not found a way to do this. The MD
command allows specifying the mode, but there does not appear to be an option
to select the “proper” sideband mode for the current band.
What happens if you choose that option?
On Fri, Apr 16, 2021 at 4:22 PM Mel Feeley via Elecraft <
elecraft@mailman.qth.net> wrote:
> I have been trying to reset my mail to a once a day but there is apparent
> no easy way to do that. Even though there is an option listed.
>
>
> Sent from Yahoo
Hi Ben,
Others with more knowledge may chime in, but here is what I know:
The crossover frequencies you can find in the K3S schematic file. Here is a
link to it:
https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740323%20K3s%20Schematic%20Files.pdf
It is the first page in the "options"
I have been trying to reset my mail to a once a day but there is apparent no
easy way to do that. Even though there is an option listed.
Sent from Yahoo Mail
__
Elecraft mailing list
Home:
Thanks.
-Original Message-
From: Don Wilhelm
Sent: Friday, April 16, 2021 14:13
To: r...@wc3t.us; 'Elecraft Reflector'
Subject: Re: [Elecraft] Do not use K4 "Restore Defaults" button
Rich,
That restore function is available in KX3 Utility - Restore Configuration. Of
course you
Carl -
Just saw your note on the reflector. This morning I completed the RF board
on one I've been building since early February. Al the soldering is done.
The rest is the mechanical parts.
It's my fourth K2. One I keep as a contest backup, two I've sold, and this
one I am donating to a
Rich,
That restore function is available in KX3 Utility - Restore
Configuration. Of course you should have saved a configuration so you
can restore it. Save a configuration any time you make significant
changes to your KX3 (not a firmware update). The file is placed in your
computer.
As you get a round tuit, will these nuances make it into the other models in
the KX-line? I always hear of the strident warnings of factory restores
hammering the hard-won calibration data and have counted my lucky stars that
I have not had to head down that road with my KX3.
-Original
In the UPDATE function of the K4, there's a DETAILS button which leads to a
tentative backup/restore feature. This will be replaced by a new backup/restore
function (CONFIG) that's easier to use and accessible at the top level.
One of the buttons on the current Backup/Restore screen is "Restore
Looking for details of switch over frequencies and expected performance of the
KBPF3A in its various bands,
There is improvement in the BCB and below 500KHz with the KBPF3A enabled,
however the other SW BCB bands I have tried are lacking.
Has anyone measured the performance of the KBPF3A?
Tempting, but I already have one. These are expensive or I'd bid on it for
fun too. Should be an easy fix...maybe.
-
Chuck, KE9UW
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
I'd buy it just for the fun of fixing it if I still lived in the USA!
73,
Victor, 4X6GP
Rehovot, Israel
CWops #5
Formerly K2VCO
https://www.qsl.net/k2vco/
On 15/04/2021 20:33, David Gilbert wrote:
I have a W2 wattmeter with the 2 KW sensor that no longer functions.
I'm almost certain that
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
20 matches
Mail list logo
