I am interesting in weight of KXPA100 with ATU.
I see two different number, 2.42 Kg in the manual and 7 lbs (anbout
3.2Kg) in the Elecraft web page.
Which is correct weight ?
73
aki ja1nlx
__
Elecraft mailing list
Home:
If CM-500 is connected to rear panel mic jack it works fine, however
if it is connected to front panel mic jack via conversion connector
I have a very low mic lebel with max mic level setting.
If CM-500 is connected to KX3 it works fine.
CM-500 mic plug to 8p plug connection in conversion
3:45 AM, ayoshida wrote:
If CM-500 is connected to rear panel mic jack it works fine, however
if it is connected to front panel mic jack via conversion connector
I have a very low mic lebel with max mic level setting.
If CM-500 is connected to KX3 it works fine.
CM-500 mic plug to 8p plug
:45), ayoshida wrote:
If CM-500 is connected to rear panel mic jack it works fine, however
if it is connected to front panel mic jack via conversion connector
I have a very low mic lebel with max mic level setting.
If CM-500 is connected to KX3 it works fine.
CM-500 mic plug to 8p plug connection
Hi all
Recently I operated 3D2YA in Mana Island, Fiji with KX3/KXPA100.
About 3600 QSOs were logged using N6BT Bravo-5 vertical Dipole.
All worked as expected. Thanks Elecraft !!!
If you are interested then look at following page, Picture gallery.
http://www.asahi-net.or.jp/~yy7a-ysd/ja1nlx.htm
John
I am using VSPE software to share serial port for NaP3 and Logger32
logging program. SDR program is NaP3.
I have not found better way to add virtual PX3 for KX3 except this.
I sometimes have unexpected error on NaP3 though...
73 de aki
ja1nlx
On 2015/03/31 7:19, John Reilly wrote:
I have
K3 FW 05.14
I do not know when it started this problem, however short holding and long
holding
Sub button always initiate Diversity mode. I tried SWH48; command with same
result.
So I can not initiate Link/Unlink. Any idea ?
73 de aki
ja1nlx
Dick
Ooops.I missed this note.
I appreciate your suggestion. Thanks
73 de aki
ja1nlx
-Original Message-
From: Dick Dievendorff
Sent: Friday, June 19, 2015 12:00 PM
To: 'ayoshida' ; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 Sub button
Check the firmware release
and the problem went away and has not recurred.
Dave Hachadorian, K6LL
Big Bear Lake, CA
-Original Message-
From: ayoshida
Sent: Friday, September 18, 2015 6:28 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Button malfunction on K3 panel
I especially notice annoying malfunction
I especially notice annoying malfunction on buttons, Band/Up/Down/VOX/QSK,
Mode/Up/Down/ALT/TEST
and SUB button. These are controled by external software commend with no
problem. For me multiple
function button seems crazy, not easy to use.
I have K2 where same kind of buttons (simple TAP and
Ross
I do not know how Logic 9 program works.
I am using Logger32 program. It supports 2 radios.
In my case K3 is configured as Radio-1 and IC7300 as Radio-2.
QSO can be logged on the same Logbook whichever Radio I use.
Logger32 supports RTTY, PSK31 etc with implemented MMTTY/MMVARI
engine,
11 matches
Mail list logo