Re: [Elecraft] Elecraft] KX3 - easiest way to panadapt?

- From: Ed Sent: 10/17/2015 5:13 PM To: 'Chris Rutkowski'; elecraft@mailman.qth.net Subject: RE: Elecraft] KX3 - easiest way to panadapt? What is " comocon " and why would I need it with NaP3 and my KX3 just to view the spectrum? Ed From: Chris Rutkowski [mailto:chrisr

Re: [Elecraft] Elecraft] KX3 - easiest way to panadapt?

Hi Ed. When the other fellow (sorry, just went blank on his name) said u need a good sound card, he was right, mostly. The better the soundcard the better nap3 will work. However, when I first started - say, the first 3 months or so, I used the soundcard built into my Old Dell D620 laptop

Re: [Elecraft] K3 and a timewave Dsp 599zx

Dave, Haven't used a Timewave 599zx with a K3, and only for a half hour or so with my KX3. However, I did use the 599zx with an older non-DSP radio for over a year and it made a tremendous difference in CW (don't operate phone much, so no comment). But my urban QTH is -very- noisy. After I got

Re: [Elecraft] KX3 and KPA-500

switching. When the need to bandswitch is detected, the KPA500 automatically goes to BYPASS, performs the band change, and then switches itself back in line all within a small fraction of a second. Bob, N6CM On Fri, Nov 29, 2013 at 1:41 PM, Chris Rutkowski chrisr...@gmail.com wrote: Hi

Re: [Elecraft] KX3 and KPA-500

Hi George. I use a KX3 with a KPA500 as my everyday rig. With the KX3 set for maximum output (12W) into resonant antennas (SWRs 1.5:1) in the CW portions of the band I see from 160W on 20M up to about 220W on 10M. I don't use SSB often enough to recall, but they in a similar range. Thus the

Re: [Elecraft] Semi-OT: Traveling by air with KX3

Hi Nick. I've traveled with my KX3 and various accessories on a dozen or more flights, both domestic (around the USA) and into several European countries. Here's a synopsis of the results and best practices derived therefrom. 1. No one has ever shown the slightest interest in the KX3 (with

[Elecraft] KX3 SWR issues when running through powered-off KPA500

I drive my KPA500 with a KX3. The KPA 500 has the January release firmware (sorry I don't have the number and I'm not at my QTH). I generally have the tuner in the KX3 disabled because it should be when running throught the KPA500, and isn't needed when operating directly into my resonant fan

Re: [Elecraft] KXPA100 AMP and KXAT100 ATU pics and info

On Thu, 25 Apr 2013 08:03:19 -0700 K6WRU wrote: I'm sure this list will be the first to know the price when they can tell us. Posting that much info without a price is a big hint that they are not releasing the price yet. Patience. I believe suggesting even a ballpark price could/would be