[Elecraft] KXPA 100 with ATU for sale

I have a like new factory built KXPA 100 with the internal ATU and control cable for sale. This was used very little and I have decided that my portable operations will be strictly QRP. $1200. shipped within the USA. Howard Sherer AE3T

[Elecraft] KPA 1500 remote program ATU power limit

I have noticed on the bottom of the display an indication of the ATU power limit which is different for every band. How is this value calculated? Howard __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] ARR SP 144 VDG for sale

I have a like new 2M Advanced Receiver Research receive pre amp for sale. Great for the K3 and transverter. This is the RF switched high gain low NF unit. I will take $120. including USPS shipping within the US. Howard AE3T __ Elecraft

[Elecraft] 73CNC.com knob for K3

I am moving my station to a remote site and can't benefit from the great tuning feel from this heavyweight N8BX 73CNC.com knob. This is the like new condition black main tuning knob for the K3/s without the ball bearing finger dimple. I prefer this style as the tuning is extremely smooth any way

[Elecraft] setting up KPA 1500 remote app

I will be moving my KPA 1500 to a remote site in a few weeks and would like to use the remote program to control the amp without the need for a local pc at the amp location. I can use the local PC at the amp if it is absolutely necessary. Can someone please walk me through the steps to set up the

[Elecraft] KPA USB problem solved

Thanks for the link from elecraft for the new drivers. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] New PC not finding the KPA 1500 on its USB port

driver and windows update does not find one. Any suggestions on how to get this to communicate? I have tried 3 different USB cables and no difference. The device managed in Windows just gives me the same no compatible driver. Howard Sherer

[Elecraft] rack mount for KPA 1500 and PS

Is there a rack mount kit available for the KPA 1500 and power supply? Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] KPA 1500 fan speed at turn off

Wouldn't it be a good idea to keep the fan turned on in the KPA-1500 after you power it off till the internal temperature reaches its lower temp? Howard __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] output power from internal 2M xvtr

I have had my factory built k3s with the internal 2M xvtr for about 5 years. the output power is only 4W. This works OK to drive my external amp, but I would really need about 8-10W for full drive. What do others experience regarding output power with the internal xvtr?

[Elecraft] KPA 1500 fan speed dwel time

On the latest firmware, what is the function of this menu item? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] KPA 1500 efficiency

Reading the display on the KPA 1500 at various RF output levels shows an efficiency as follows on 40M into a dummyload: 300W 23% 500W 27% 1000W 42% 1300W 48% 1500W 52% 1600W 54% Have other owners seen results like this? Do you think a firmware and menu item could be developed to

[Elecraft] ptt line interrupter

Problem solved, bad connection to my ptt disconnect switch. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] key line interrupter

I have a 15 pin adapter with pin 10 removed as a ptt interrupter. With it inserted in line with my acc cable on the rear of the K3 to the KPA, the amp still keys. I would like the KPA to not key when I am using other amps for VHF. I can only do this by removing the acc cable from the rear of the

[Elecraft] help with writing a macro for the KPA 1500

I am trying to write macros for the PF 1 & 2 keys for the KPA 1500. My objective is: Have the PF1 button switch the Input to the K3s with the command ^PF1^XI0; Have the PF2 button change the input type to serial (for Flex) with the command ^PF2^XI3; Neither one is working, where am I going

[Elecraft] extension of the length of the K3/KPA acc cable

I have the older style thick heavy cable from Elecraft for connection between the K3 and the KPA amp. It is just a little too short to fit my application. What is the best way to extend its length without any pin conflicts to the missing pins? Can a standard VGA cable be used on the K2 side?

[Elecraft] switching between 2 radios on input of KPA 1500

Other than a coax switch on the RF input, would there be an easy way to select the enhanced control of the 1500 between a K3s & Flex 6400. Both radios will be set up for enhanced control of the KPA. Can the interface cables for both radios remain connected and you just reconfigure the KPA menu

[Elecraft] KAT 500

The KAT 500 has been sold Thanks for all the interest. Howard __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] KAT 500 for sale

I have a like new KAT 500 for sale. $500. plus shipping from 18104 Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] K3s com port problem solved

Problem solved, thanks for the advice. The jumper loop from the K3 to the P3 had a bad connection to the upper PC connector, therefore the outside world could not see my K3 or P3. I found it by trying the P3 utility and had the same problem which pointed me to that cable. Howard AE3T

[Elecraft] K3s USB com port no longer working

The USB com port on my K3s is still being seen when connected to my computer but will no longer connect to any program. I have re booted the computer 2 times and power cycled the K3 and no change. Any ideas where I should look? Howard AE3T

[Elecraft] KPA-500 clicking as the temperature changes

I have had a KPA500 for many years and the only annoying thing is that I hear clicking of the metal case parts as it heats up and cools down. all of the case screws are tight and I had this problem from the early days even before I had to remove the RF deck and send it to the factory for minor

[Elecraft] Prevent the K3s from keying my KPA500 when I am on 2M

on the list from August 2019 but I have not found his solution for this KPA 1500 to work in my case. Any suggestions from this group would be appreciated. Howard Sherer AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

[Elecraft] How to connect to KAT & KPA with the remote programs

I can connect OK using the KPA-500, & KAT-500 remote programs using the host mode. If I would like to use the connect mode, how do I determine the TCP server port, and host /IP of my KPA & KAT devices? Howard AE3T __ Elecraft mailing

[Elecraft] will utility programs run on Apple Ipad os ?

Will any of the K3, KPA and KAT utility programs and remote programs run on the new Apple Ipad os ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Elecraft cable has been sold

Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] FS cable for K30 mini RRK0CBL

FS cable for K30 mini RRK0CBL $35. Howard Sherer AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

[Elecraft] RRC set sold, Elecraft RRK0CBL cable still avlb

Elecraft RRK0CBL cable for the K30 to the RRC 1258 $30. Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] RRC 1258 mk II FS

Complete Remote Rig RRC 1258 mk II Elecraft Twin setup with 2 power supplies and all standard cables $325. Elecraft RRK0CBL cable for the K30 to the RRC 1258 $30. Howard AE3T __ Elecraft mailing list Home:

[Elecraft] FS Remote Rig RRC 1258 mk II Elecraft Twin set

complete Remote Rig RRC 1258 mk II Elecraft Twin setup with 2 power supplies and all standard cables $500. Elecraft RRK0CBL cable for the K30 to the RRC 1258 $30. Howard AE3T __ Elecraft mailing list Home:

[Elecraft] Remote rig System RRC 1258 MK II Set

with an Elecraft K3 or K3s but can be used with many different radios. This system works great to remote into your own system with no computer required, or access the stations on Remote Ham Radio, or Remote Hams.Perfect condition $500. Howard Sherer AE3T

[Elecraft] For Sale Elecraft K30 mini with RRK0CBL cable $550.

For Sale Elecraft K30 mini with RRK0CBL cable $550. Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] RRC 1258 MKII for sale

For Sale RRC 1258 MKII Elecraft twin set with cables. Everything works great $500. The Elecraft RRK0CBL cable is included Howard Sherer AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] RRC 1258 MKII Elecraft twin set FS

For Sale RRC 1258 MKII Elecraft twin set with cables. Everything works great $500. The Elecraft RRK0CBL cable is included Howard Sherer AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] FS RRC 1258 Mk II Elecraft twin set up with all cables

For Sale RRC 1258 MKII Elecraft twin set with cables. Everything works great $500. The Elecraft RRK0CBL cable is included Howard Sherer AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] FS RRC 1258 MKII Elecraft twin set with cables

For Sale RRC 1258 MKII Elecraft twin set with cables. Everything works great $500. I will sell the Elecraft RRK0CBL cable later. Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] KUSB cable needed

I must have lost my KUSB cable to connect my KPA 500 to a computer for remote control (9pin male to USB). I have many KXUSB cables. dose anyone have an extra to either sell or trade? Howard AE3T __ Elecraft mailing list Home:

[Elecraft] simple remote control of KPA 500

suggestions. I can do this with my RRC interface and K30, but this need if for another application. Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] FS Phonema KSP3 Elecraft style speker

Mint condition $130. plus shipping Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] Adding a low noise preamp into the receive line of the internal 2M trnsverter

Is there an easy way to add a pre amp into the receive line on the internal K3 2M transverter? Howard Sherer AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] Small set up for KX2 digi

I would like to take my KX2 along as a very compact JT65 & FT8 station. Are there any suggestions for Ipad applications and any tiny sound card interfaces? Howard Sherer AE3T Visit my photography website at www.howardsherer

[Elecraft] SOTA Low Rider stand for the KX3 FS

It has been sold. I only responded to the 1st buyer and payment has been received. Thank you __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] SOTA Low Rider stand for the KX3 FS

I have changed to KX2 for portable operation and no longer need this very compact stand $20 shipped withinthe US. Howard Sherer AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] background audio white noise when using my K30 for remote control of my K3

very loud into the mic. I have not had this problem in the past, and have RF chokes on the rear panel mic input cable. The problem is not RF related but digitl hash getting into the K3 rear mic input. I would appreciare any suggestions. Thanks, Howard S

[Elecraft] Elecraft Frequency Memory Editor Software

Elecraft Frequency Memory Editor Software, has this been updated for the Mac OS? My PC is dying very quickly! Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] ERR KEY

I solved the problem. I had to force the control line DTR = Low in the radio config menu of WSJT. I dontknow why but i tried many things andthis works. So a note to others configuring WSJT. Thanks everyone for the suggestions. 73 de AE3T Howard Sherer

[Elecraft] ERR KEY

I have installed the new version of WSJT-X and when changing the bands on my K3s, I get the ERR KEY code on the display and the K3s is forced into Tx. I must power cycle the K3s to clear, but repeats when I go to these bands again. This occurs only on 80, 20, 17, 15, 10, & 6M, the other bands are

[Elecraft] Performance of the KX2 batt

I have been running my KX2 with the Elecraft supplied batt pack for the past two weeks and have a question for others using the same. I can run the KX2 at 10W only till I have used 1.12 AH of the batt capacity and its key up V=11.0 and key down is 10.3. At this time I can only run the KX2 at 5W.

[Elecraft] use of the KX2 charger as the PSU

With a change of din plug, can the Tenergy charger for the KX2 be used to power the KX2 to full power. I would like to limit what devices I travel with. Howard AE3T __ Elecraft mailing list Home:

[Elecraft] Need of an external sound card with the KX2

I plan to do some light weight travel with my KX2 running JT65, JT9 etc in the future. Can I connect the audio in and out ports of the KX2 directly into my laptop or will I need an external device like a Signal Link. If not needed how will the software key the KX2? Howard AE3T

[Elecraft] KX3 and acces FS

Due to the need to downsize my portable station to travel very small and light I have decided to replace my great KX3 with a KX2 which is now on order. This includes the KX3 sn 482, KXAT3 tuner, KXFL3 filter, KXBC3 clock/charger, KX side panels with plexi cover. I would like $1190. I will reduce

[Elecraft] K3s USB com port issue

I have delayed posting this as I was hoping that I would see the same issue posted by another user. I am running a K3s and the issue is with the USB com port. First, the com port assignment is com 27 which seems strange for my simple PC set up. I have tried to go into the Windows control panel

[Elecraft] Strange config of K3s com port using the USB interface

I am using the K3s USB interface for both audio and control of digital programs like WSJT. Overall everything works fine but there is a strange issue while configuring and getting to work the PTT port assignment. When I start the WSJT program, it will not key the K3s PTT unless I just start up

[Elecraft] Configuring the RRC remote rig box with the K3s

I had great success using the K30 with my K3 using the RRC boxes. I now have a K3s and it is running great along with the P3, KPA etc using the special CBLP3Y cable supplied for the P3. I have not yet tried to re wire the RRC box to the K3s but I am not sure if I should disconnect the PC end of

[Elecraft] Setting audio levels (power out) in Data A for RF output stability on K3s

When I use the Data A or AFSK A modes, I set my line in to just fill the lower 4-5 bars of the ALC scale, and then adjust the pwr out for the desired level. what occurs when I xmit is an increase in RF output as it rapidly drifts up. If I adjust the pwr down it still drifts up. This is an issue

[Elecraft] Can I pre set Data A mode in a memory

I know that I can store data as a mode in a memory but when I recall it, sometimes it comes back as Data A, and other times as AFSK A. I easily just re select the Data A mode for data but I don't understand why it changes data modes. Can I default or store the data mode as A? Howard AE3T

[Elecraft] FS ARR Advanced Receiver Research P50VDG 6M pre amp

For Sale Just removed from my K3 upon K3s upgrade. Great 6M Rx pre amp. $75 Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Use of config Tx Inh pin 7 of ACC K3s

I am trying to use the Tx Inh (pin 7 of ACC) to allow the K3 to xmit only when my 2M EME sequencer allows. In testing out this function, I find that when Inh Hi or Lo is used, once you apply a logic change to pin 7 the Tx Inh will lock in the on position. Removing the logic signal, or returning to

[Elecraft] Internal 2M xvtr in K3s

Just setting up my K3s The 2M xvtr will only give me about 5W max output not 10W. This was a factory installed option, and I don't want to go through a re cal right away. I also need to be able to adjust the 2M output from 1-10 W as a driver for my PA for EME. I find that the power adj on the K3s

[Elecraft] K3s USB com questions

I am just setting up my K3s and have 2 questions regarding the USB com use. The com port that is assigned to my K3s is com 27. This com port is NOT listed as one that is available on some of the programs that i use, where it IS shown on some of the programs. And ideas on a workaround? Also the

[Elecraft] K3 For Sale

In making my plans for a K3s upgrade, I have decided to sell my K3. I am going to remove all of my optional filters and only include the 2.8, 8 pole SSB. Currently running the latest firmware. K3 100 S/N 504 with all updates except for the enhanced Lf bandwidth DSP ATU KXV3 KBF3 This has been a

[Elecraft] K3 FS

In making my plans for a K3s upgrade, I have decided to sell my K3. I am going to remove all of my optional filters and only include the 2.8 8 pole SSB.Currently running the latest firmware. K3 100 S/N 504 with all updates except for the enhanced Lf bandwidth DSP ATU KXV3 KBF3 This has been a

[Elecraft] K3s USB built in sound card

Can anyone share their experience in using the K3s built in sound card with various digital mode software including JT65. Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Remote control of KPA with the addition of a KAT

I recently added a KAT 500 to my K3 station. I modified the interface cable to allow for remote power on off of the KPA via a macro key on the K3. Now with the cable going from the K3 to the KAT and then to the KPA I have lost the ability to remote the power on off of the KPA. How have others

[Elecraft] Pig knob sold

Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] Pig Knob for sale

Due to a change in the way I have my K3 installed I am no longer in need of my Pig Knob. It is perfect and a very handy device. I will sell it for $100. including postage to the lower 48 states. Just cover my pay pal fee if paying by that method. Howard Sherer AE3T

[Elecraft] K30 mini ticking sound

I have up dated my K3 to the latest Beta FW to cure the ticking sounds when using it with the K30 mini under remote control. The ticking still occurs, and I assume that I also have to up date the FW in the K30 mini as well? How do you connect the K30 mini to the K3 util to allow for FW up

[Elecraft] modifying an aux cable for remote kpa operation

I am getting ready to set up my K3 KPA for remote operation and will have to modify the KPA to K3 AUX cable for remote power on/off. How have others added the wire at pin 11 at the K3 to pin 8 at the KPA? Have you torn apart a standard VGA cable and changed the connections, or just made up a

[Elecraft] very small 20A switching PS

A few years ago there was some discussion here about a very small 12 v 20A switching PSU with very low noise that was designed for radio use. I am now interested in one for use with my KX3 KXPA. Can someone point me in the right direction. Howard AE3T

[Elecraft] Swap a serial to a USB cable

I have a new in the bag Serial cable for the KX3, KAT etc, that I would like to swap for a USB cable. Is anyone interested? Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] FS THP HL-45B amplifier

I have decided to sell my THP HL-45B amplifier. I use this with my KX3 and it needs about 4 W to drive it to full output of 45W. I can drive the KPA 500 to full output with the KX3 running about 1W to the HL-45B. This is a very nice small 160-6M amp for any QRP radio. It features auto band

[Elecraft] Long delay on RTTY sent with the paddle

When using my K3 to send RTTY via the keyer paddle there is a long delay of about 4 sec after sending the last character for the receiver to return while you continue to transmit additional spaces. Is their a menu command to greatly shorten this 4 sec return to receive delay? Howard AE3T

[Elecraft] PigRemote has been spoken for

The PigRemote has been spoken for. -- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

[Elecraft] FS PigRemote

I have a PigRemote works great with K3 and KX3. $215. plus postage Howard AE3T -- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] OT: For Sale Pigremote Elecraft control via Internet

I am interested if still avlb. Howard AE3T Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] SGC 500 SS HP PA

I have an excellent SGC 500 Linear Amplifier for sale Ideal for either Base or Mobile 25 watts in gives you 500 watts out PEP and CW. Export Model 1.6 thru 30 MHz Solid State, Auto Band Switching, DC input voltage range 10 to 18.5 VDC and weight only 21 lbs. $1250 includes shipping to lower

[Elecraft] Nifty mini manual for the K2 and options

Just going through my stuff and found this nice laminated manual, no longer running a K2. If anyone wants it, just cover the US postage at $4. -- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

[Elecraft] K2 Nifty manual has been spoken for

-- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] FS KAT-500 tuner

Selling my mint condition KAT 500 tuner (7 months old). $625. plus 1/2 shipping from PA. Please contact me off list. howar...@lehigh.edu Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] KPA 500 not turning on every time

I have had this problem since the my KPA was new 7 months ago. Occasionally it would not turn on when the on button was pushed, you had to cycle the rear power switch and then the on button would turn on the KPA. This problem has gotten much worse and now occurs about 50% of the time. Is

[Elecraft] Downloading beta files

What is the procedure to download beta firmware? When I click the file name from the ftp server I just get a link to it in my download folder. -- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

[Elecraft] Default tuning rate on the Pigknob

Just installed the Pigknob on my K3 and it works great. I would like to speed up the default tuning rate from 100hz per rev to 1khz per rev. Is there a K3 command to change the encoder tuning rate? -- Howard Sherer __ Elecraft

Re: [Elecraft] Tokyo Ham Fair 2013

Johnny, I Just got home last nite, it was great to meet you last week. Looking forward to seeing you again early next year. Howard AE3T -- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] K3 FS

Monty, Is it still avlb? What is your asking price? Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] Acom 1000 FS replaced with a KPA500

will be in contact. Howard AE3T howar...@lehigh.edu -- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] bug with P3 VGA USB kbd software

I don't know if my problem is unique, but I am getting frequent P3 resets. About every 10 to 20 min with the K3/P3 operating fine with either no data fields showing or in the data mode, the external VGA monitor freezes, and the P3 displays its reset notice P3 Boot Loader, Download Firmware,

[Elecraft] Amplifier keying line delay setting

It appears that the amplifier keying line is always set to operate as QSK with no delay. This keying signal dose not follow the delay that is set for the VOX on CW. The only way that I have found to keep the keying line closed is to put the KX3 into xmit with the front panel button. Will an

Re: [Elecraft] Amplifier keying line delay setting

The CW delay is not the issue but the delay fore the amplifier keyeng circuit. It is always set for QSK and dose not follow the delay that is set for the CW break in. __ Elecraft mailing list Home:

[Elecraft] Upconverter

I have one of these already built up if any one would like it for $20. plus postage. Contact me off list. Happy holidays Howard AE3T -- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] Up converter has been spoken for

-- Howard Sherer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] K3 RF in SSB audio on 6M

Only on 6M when I operate above 250W, I have RF getting into my SSB audio, using either the the R or F mic connector but slightly worse with the R mic connector. I have installed Fer chokes on the audio input lines with no improvement. Any suggestions. -- Howard Sherer

[Elecraft] FS KXPD1 for the KX1

I have a new built KXPD1 for the KX1 that I have decided not to use (I favor a small external paddle). $55 plus postage. I also have a Parkwood mini paddle if anyone is interested. I can send photos. Howard __ Elecraft mailing list