[Elecraft] Fwd: Headphones
Neil, I'm glad you took this discussion in this direction. I, too, wear BTE aids and though I spend most time on CW, from time to time it is nice to work SSB. The chat here has got me thinking how I might use my Sennheiser headphones with foam pads as they are wonderful for music at least. They don't block out background noise but they are very comfortable. All I'd need to do is add a mic and I'd be good to go. I'm looking at the Grado Sr's right now so that could be an option. 73 - john - n0hj On Thu, Nov 3, 2022 at 11:23 AM Neil Foster wrote: > Dan Pressley is correctheadphone choice is personal. Being severely > hearing impaired with BTE hearing aids in both ears I found the GRADO SR > basic phones excellent. They are open back which allows the usage without > the nasty feedback from closed back. Not all phones are compatible with > hearing aids. Neil N4FN > john.evans.n...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3, KXPA100 setup with Win4K3 Suite question
Hi Don, Thanks for the recommendations and comments. Both the KXPA utility and the KX3 utility communicate fine with my hardware setup. I'm guessing the WIn4K3 Suite does not properly communicate with both devices through one com port. I'll see if I can post on their groups.io forum and see what they may have to say. Thanks es 73 - john - n0hj On 12/27/2021 12:09 PM, Don Wilhelm wrote: John, Only one KXUSB is needed. The other is just a TRS to TRS cable. The KXUSB cable must connect first between the KXPA100 and the PC. The second cable between the KXPA100 and the KX3. If connected that way, everything should work. See if both the KXPA100 Utility and the KX3 Utility will connect properly. I don't know what Win4K3 suite does in its routing. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3, KXPA100 setup with Win4K3 Suite question
Greetings, Has anyone using Win4K3 Suite with a KX3 and KXPA100 been able to get the KXPA100 to show up in the Controller menu ? Is another KXUSB cable required? How is your system all connected? Is this even necessary or even possible ? I have my KXPA100 and KX3 connected as diagrammed in the manual(s) and I see no way to create another KXUSB connection at all. If you have this config working, I'd appreciate some direction. Looking for guidance - thanks in advance, John - N0HJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 Transmit Bias cal procedure question
This is a resend since I did not see any response to my question the first go around. Greetings, I'm going through the cal procedure for transmit bias. Once I tap XMIT, it seems to stay there forever with the current bouncing around between .04-.06 A but it never seems to complete. Am I supposed to cancel by hitting XMIT again or am I supposed to wait ? Any guidance would be appreciated. Tnx es 73 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 Transmit Bias cal procedure question
Greetings, I'm going through the cal procedure for transmit bias. Once I tap XMIT, it seems to stay there forever with the current bouncing around between .04-.06 A but it never seems to complete. Am I supposed to cancel by hitting XMIT again or am I supposed to wait ? Tnx es 73 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Kx3 and KXPA100 without PX3 while using a computer pan adapter
Greetings all, I’ve been using HDSDR with Omin-Rig with a Xiegu G90 and was able to get the panadapter setup working with my KX3 by itself. Now I want to add my KXPA100 into the setup and am wondering how the cabling should be configured. I have my computer connected from the KX3 ACC1 port through the KXUSB cable to my computer. I also have the KX3 RX I/Q port connected through a USB sound card to my computer. All seems to be well in this configuration. Looking at the KX3 manual and Cady’s The Elecraft KX-Line book, it seems that I would connect the amp through the KXPACBL control cable. This hookup looks like I need to connect both the ACC1 and ACC2 end of the control cable to those ports on the KX3. Do I just let the ACC1 end of the control cable dangle? Is anyone else running a similar setup that can provide some insight? Thanks in advance 73 - John - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Japanese Elecraft catalog
It seems that Tamiya has their own Elecraft catalog. Interesting but not near as interesting as OUR Elecraft. Just search for Elecraft and Tamiya on the auction site. 73 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft IS shipping all of our amp models
An optimist believes we live in the best of all worlds. A pessimist fears this is true. John - n0hj On Thu, May 28, 2020 at 7:12 PM Lynn W. Taylor, WB6UUT < kx...@coldrockshotbrooms.com> wrote: > Why do people always assume a dire future -- always the worst possible > outcome? > > We all do this, and it's a bad habit. > > I'm trying hard not to, and I've been a lot happier. > > 73 -- Lynn > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3s For Sale Loaded
Why the restriction in shipping to the lower 48 only? Shipping to Alaska or Hawaii may cost a little more but I've not seen any reason for such a restriction. I respect and welcome your reply. John - n0hj On Thu, Jan 30, 2020, 5:22 PM Ron Gould wrote: > K3s 100 watt Transceiver > KAT3A Antenna Tuner > KRX3A Subreceiver > 2-KFL3C 200 HZ Filter CW > 2-KFL3C 400 HZ Filter CW > 2-KFL3C 2.80 HZ Filter SSB > 2-KFL3C 600 KHZ Filter AM > 2-KFL3A 1300 KHZ Filter FM > KBPF3A Pass Band Filter > KDVR3 Digital Voice Recorder > KCTX03 High Stability Oscillator > K3s Book from Fred Cady > Operating Manual > $4000 Pickup > Portland Oregon > $4100 shipped insured and professionally packed lower48 > Prices are firm > Please respond off list > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to john.evans.n...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA-500 with Portable Generator
Honda just issued a stop sell order for the 2200 due to some hardware issues. https://rvdailyreport.com/industry/honda-issues-stop-sell-order-for-eu2200i-generators/?fbclid=IwAR0e810z_ppbrXdUdY6egI8F-MvVtSTwZE_cDQq9ILLMEZPUT96P4J8E5_8 On Thu, Mar 7, 2019 at 12:29 PM Bob McGraw K4TAX wrote: > The Honda EU2200i will handle the KPA500 quite well and provide power > for other items.... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Query for new DSP features
And yet, I have no idea which Elecraft rig you are referring to here. Drives us K1, K2, KX3 owners crazy. 73 - john - n0hj On 1/11/2019 9:49 PM, Walter Underwood wrote: It would be really great if the AF gain was automatically to keep the audio roughly level when NR is engaged. This drives me nuts, always riding the gain back and forth. I’m sure the gain adjustment would be different for different conditions, but at least get close. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) On Jan 11, 2019, at 8:38 PM, Mike Lichtman via Elecraft wrote: Wayne, I would like to see an improved Noise Reduction that doesn’t lower the volume or distort as much. Also the digital mode decode has never really worked well for me and, yes, I read the manual about using it. Could you have the digital choices RTTY, PSK31, etc. instead of the current settings like FSK, data, etc? Pie in the sky thought — Having the radio identify the type of digital signal being received with a word in the display and automatically change modes/settings to accommodate it. 73 Mike KF6KXG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PX3 & thumb drive...
One thing you might try is use Windows disk management in the administrative tools section of control to partition the large thumb drive with a first fat32 partition that is 2 or 4 GB - if your whole drive is fat32 you should just be able to shrink it down to a size that may work. If it isn't fat32, delete the partition and create a smaller partition that is. Then you can create a 2nd or more partitions after that one for NTFS or whatever. I had an issue where a thumb drive was needed to upgrade firmware in an Agilent digital scope but we didn't have appropriate thumb drives, so I took a 1 TB USB spinning hard drive and partitioned with the first partition being a small fat32 partition with the firmware cab file and it worked great. If you try this and it works, please let us know. 72 - john - n0hj On 2/25/2018 7:19 AM, Stephen Shearer wrote: Yes, not class 10 takes longer... My thumb drives ARE formatted FAT32, I checked. ... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FS : KPA-500
That's quite a markup, but it should fund quite a few other projects. ;) 73 - john - n0hj On Thu, Jun 1, 2017 at 8:47 AM,wrote: > Unit is in Nearly-New Condition - non-Smoking environment and cared-for by > an FCC Licensed Tech (FCC First Class Radio Telephone and Telegraph, with > Radar and Avionics) > > Serial Number # 0426 > > Has the following Options: > > KPA-500 Amplifier > Cable Set > > Total value (new) over $2,105 > Asking $11,500 + $75 shipping (insured, from Florida) > > Selling to fund other projects in interests other than HF > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Windows Emulator
What VMs did you 'test' that had bad performance? 72 - john - n0hj On Wed, Oct 12, 2016 at 11:37 AM, Fred Moorewrote: > > I tested some VM that wasn't cusomized for the OSX and performance was > horrible, slow and cranky.. > > Regards.. Fred > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - am I locked into a specific microcode level
Why are we using the term microcode here? When I think of microcode, I think of the code within a cpu that takes the machine code from outside the processor and turns it into the signals that move and manipulate the data within the processor, turning on and off registers and paths. When I think of firmware within a device such as an SDR, I am still thinking along the lines of machine code that is outside of some processor. 72 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] For Sale: KX3 Loaded, PX3, and KXPA100
The PX3 has sold. 72 - john - n0hj --- >>> 3.) >>> I have a PX3 that was a kit. It's good to go but the screen is a bit >>> scratched... not noticeable when it's powered on. It has the cord that >>> comes with it and an unused power cord. It also comes with a Nifty >>> manual. >>> >>> $315 + $10 shipping >>> ... >>> >>> Thanks for looking! >>> >>> Matt Lovewell - W0MLD >>> >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] For Sale - handled/rackmount brackets/panels for K2
Greetings, A long time ago, someone manufactured and offered a pair of unfinished aluminum side brackets/panels for the K2 for those of us who wanted to replace them with something with handles much like rack mount equipment would have. I purchased these but do not know who made/sold them. If anyone would have a need for these, I offer them up in the US for $18.00 shipped in a padded mailer. The two side panels are drilled for the mounting holes similar to the K2 side panels and includes a set of screws. 73 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] For Sale - handled/rackmount brackets/panels for K2
Thanks for the interest. The bracket/side panels have been spoken for. 73 - john - n0hj On 1/13/2013 12:14 PM, John Evans - N0HJ wrote: Greetings, A long time ago, someone manufactured and offered a pair of unfinished aluminum side brackets/panels for the K2 for those of us who wanted to replace them with something with handles much like rack mount equipment would have. I purchased these but do not know who made/sold them. If anyone would have a need for these, I offer them up in the US for $18.00 shipped in a padded mailer. The two side panels are drilled for the mounting holes similar to the K2 side panels and includes a set of screws. 73 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Question on KX1 paddle mount
Greetings, Before I do something stupid like strip the threads on the mount hole, does anyone know what the thread size is ?? Metric or US? 4-40 perhaps? tnx es 73 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Question on KX1 paddle mount
Thanks Don, I'll keep that in mind and be very careful as I plan to homebrew a paddle set and mount it there. 73 - john - n0hj On 1/7/2013 7:19 PM, Don Wilhelm wrote: John, That is threaded for 6-32. Since you are apparently going to put a screw into that hole that is something other than the paddle mounted thumbscrew, I will offer a caution - Do NOT allow the screw threads to extend inside any further than the depth of the threads. If the screw tip overlaps the edge of the board, it will damage a PC trace that is quite close to the edge of the board just below the key jack. I have repaired several where that happened. The usual symptom of that damage is that the KX1 goes into transmit as soon as power is applied. 73, Don W3FPR On 1/7/2013 8:14 PM, John Evans - N0HJ wrote: Greetings, Before I do something stupid like strip the threads on the mount hole, does anyone know what the thread size is ?? Metric or US? 4-40 perhaps? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html