It would be great if PSK63 could be supported. Like 75 baud RTTY, it's
popular in contests.
Julian, G4ILO
WB0OEW wrote
Yes, and you can send RTTY that way also. No other digital modes are
supported but more could be added to
the firmware if there is room and interest.
-
Julian
://myworld.ebay.ca/phutping/?_trksid=p4340.l2559gt;
This is a UK seller who provided the cable in 5 days UK to Canada. and it
works.
Finally I don't have to use the KX3 utility to key the rig via USB.
-
Julian, G4ILO. K2 #392 K3 #222 KX3 #110
* G4ILO's Shack - http://www.g4ilo.com
* KComm
Have you tried using KComm? It uses the same built-in capability of the K3
(and KX3) to send and decode RTTY and PSK31 (and CW).
Julian, G4ILO
Mike Flowers wrote
Hi Gang,
Has anyone been successful getting solid copy in RTTY or PSK31 using the
Terminal feature of the K3 Utility
.
Julian, G4ILO
Don Wilhelm-4 wrote
Since this is just another digital mode, why would you not set the K3
ALC indication as specified for other digital modes. 4 bars on the ALC
meter with the 5th bar flickering.
If you do not do it that way, the K3 will power hunt and you will not
have
the data presented in the VFO B window.. and with a
much larger character count. Also, there is an input text window,
plus 16 message memories.. which can work quite nicely for a contest
situation. You still have to do logging and keep track of serial
numbers.
-
Julian, G4ILO. K2
didn't get it. I'm
surprised that a firmware version with a known bug is still on the FTP site.
Matt Zilmer wrote
See Wayne's earlier email. This update fixes the 180 MHz problem with
the 144 Mhz transverter as well.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http
The latest beta firmware appears to be dated 8 November and this issue was
raised later than that. So I guess not.
John Lemay wrote
Is this fixed now ?
Thanks
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune
.
Is there something better suited to casual CW QSO's?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/CW-Decoding-Your
On the K3 and KX3, is it possible to set/get the sub-mode of PSK D (45 or 75
baud.)?
Is it likely in the future that the K3 and KX3 will support a 63 baud
variant of PSK D?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
Waters and Stanton is building Elecraft products in the UK and is offering a
full warranty on them. So they presumably have repair facilities.
What you really need is a British W3FPR!
Julian, G4ILO
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http
It might be worth taking a look at the macros that generate the error.
Julian, G4ILO
Bruce Wade wrote
Just move to another XP machine. The K3 and old computer worked great.
On some macros I get List Index(3) out of bounds risk data corruption.
Any ideas what I am doing wrong?
Bruce
noise
cancelling box, to avoid having to use the RF sensing.)
Is there a solution?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft
reference for use
with the K3XREF. But I hope they make it so it works with something we can
use over here. WWV is not a good enough signal to be reliable.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
there was no
modulation. :( I run my K3 in SSB with the filter centered on 1.4kHz and it
sounds great to me.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http
by the availability of a
digital modes interface along the lines of the one designed and made
available several years ago as a limited edition kit by Pauli EA3BLQ (SK)?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
No, still the same message. :(
Julian, G4ILO (About to hit the road)
On 26 May 2011 06:38, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com wrote:
Odd - I'm seeing a lot of entries come in fine. The host resolution is part
of the anti-spammer protection.
Give it another try.
73
) in the KX3. It would be in the ~5W range, and would
substitute for the optional ATU. If you needed both the transverter
and an ATU, you'd need to use an external ATU such as the Elecraft T1,
which can be band-switched and remotely tuned directly from the KX3.
-
Julian, G4ILO. K2 #392
tomorrow, along
with a link from our main page to this form.
73, Eric WA6HHQ
www.elecraft.com
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context
there are people who would buy one for that reason alone, if
it were possible.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2
Paul Saffren N6HZ wrote:
Remember those watch bands from the 70's? We built up a scale model in
the shop and it fits perfectly on one's forearm.
paul
At last, I get to be Dick Tracy!
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http
decision.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Something-really-new-at-Dayton-from-Elecraft
guessed it would come from Elecraft.
I bet these are going to be backordered for months. At least.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http
a real serial cable into it. Therefore it would be best to buy a separate
proper cable for use with the K3 and only the K3 rather than modify your K2
cable and then risk damaging your K2.
Julian, G4ILO
Philip L. Graitcer-2 wrote:
I am using a built according to the manual K2 cable between my K3
underneath/overtop of
the station you want to work.. There is a trade off when you step away
from transverters.
Roger K8RS
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune
Jim Wiley-2 wrote:
The FCC has the power to
force your neighbor to stop using the interfering device.
Bet that improves neighbourly relations no end.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
get virtually full output.
So I think the OP actually asked a very reasonable question.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http
. It it
isn't then it's non-linear. The practical question is how much
non-linearity is acceptable.
--- On Wed, 5/11/11, Julian, G4ILO lt;julian.g4...@gmail.comgt; wrote:
If it does that then it will be the first linear amplifier
I have ever seen
that actually keeps that relationship across the whole
.
You'd need a PIC thingy to do the keying too, though. QRSS isn't only done
using on/off keying, it can be done using 5Hz shift FSK.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http
synthesizer
boards in my K3. I've checked the archives with mixed results as to the
efficacy of this mod. Any opinions out there? Thank you.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
it isn't
free.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-Control-Cable-Question-tp6310306p6311357.html
on? To maximize life of the rubidium lamp
in the frequency standard I wouldn't want to leave it on all the time and
for a lot of amateur operation the frequency accuracy it provides isn't
needed anyway.
Julian, G4ILO
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm
Do you have an anticipated price for the EX REF module?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New
. It is a transformer based supply and has a
variable voltage control with a detent at 13.8V so you can set the voltage
to a higher level for better TX performance.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
the frequency is selected - the rest
is done in the computer application software.
73,
Don W3FPR
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context
What are the advantages / disadvantages of this type of frequency standard
over the Efratom LPRO-101 which is a rubidium standard?
Julian, G4ILO
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com
is being controlled
using discrete steps.
Has anyone tested the effect of these small stepwise adjustments of
frequency on the WSPR mode, in which the data is transmitted using a
frequency shift of about 1.5Hz?
Julian, G4ILO
Rich Heineck wrote:
The K3EXREF uses the 10 MHz standard as it's time base
http://www.qrpproject.de/UK/elecraft_k3.html or direct from Elecraft.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2
.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Frequency-display-tp6212996p6214321.html
Sent from the Elecraft
can
participate in the reflector in a forum-like way using Nabble (there is a
link to it on the same Elecraft page that links to the reflector.) That is
how most of us who would have preferred a forum now use it.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm
not the radio, but with
other connector types that would not be possible.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2
to solder the connectors I'm not going to disagree with them.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Re
For HF use I would recommend the JT65-HF program by Joe Large over the WSJT
by K1JT. Same mode, different and much easier user interface.
http://jt65-hf.sourceforge.net/
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
a second. The Windows built-in time
sync usually isn't good enough. The best software to use for this is NTP for
Windows which you can get here: http://www.meinberg.de/english/sw/ntp.htm .
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com
one or the other or whether either of
them work. The Programmers Ref will probably have the answer to that.
Happy coding.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View
what it
is.)
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Multiple-Ghost-Image-CW-Decodes-While-Using-CW
. KComm
supports it.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K-3-USB-SignaLink-for-better-RTTY-decoding
don't.
It's a mystery.
Julian, G4ILO
Bob-19 wrote:
I've recently setup my K2 for digital modes using HRD and DM780. After
some
fiddling with audio levels, HRD/DM780 seems to work reliably with my K2.
It
was subsequently suggested that I try the FLdigi set of software (FLdigi,
FLrig, FLmsg
command that just says change frequency. If the K3 would do what
the computer tells it and only what the computer tells it then it would fix
an annoying problem with several programs besides N3FJP.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http
You can also buy from QRP Project in Germany if you want to avoid the high
shipping costs from the USA. I think German VAT is now cheaper than ours.
The built K3s are I think professionally assembled in Germany from kits.
It's a bit hard to find pricing on that website, though.
-
Julian
to it internally. I do run my K2 at 10W in
digital modes but only for APRS packet where the transmissions a maximum of
a few seconds.
Julian, G4ILO
Owen B. Mehegan wrote:
At the moment I mostly use my K2 (no KPA100) for data modes - PSK31
and Olivia. I've read that it's recommended you keep
I meant ... if you had a KPA*500* you could drive it to 100W output and ...
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791
legal limit, but I have worked several RTTY stations in a contest using
only 100 watts.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http
Have you tried using the K3 Utility (or KComm)? If you can send CW with
either of those it will show that the problem must be an HRD issue and not a
fault with the settings of the K3.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com
Personally I didn't find the built-in whip to be any use at all. But YMMV.
Vic K2VCO wrote:
You can use the built-in whip or you can connect an external noise
antenna. Just don't
make it resonant or put it too close to the transmitting antenna if you
run high power!
-
Julian
in the power output using the PWR
control will cause the slow recovery if done before or during a WSPR
transmission.
Is this normal?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
anymore,its too late,so design and build another amp for 1KW and I am sure
you will sell way more than the actual 500W unit.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
, and
unnecessary verbiage (like /QRP, for example).
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA500-just-500-watts
!
Something wrong?
thanks
luca
73 de iz0fyl
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/k3-cw-decoder
, it's will only open to 200 hz and it's too narrow to tune
around the band looking for rtty signals.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message
convenient.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Software-for-RTTY-tp5892932p5893381.html
Sent from
that is at fault. Which, while
not being the helpful response you might expect from the developer of a
component if you had paid good money for it, is nevertheless true.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune
It looks like Leigh WA5ZNU is on the case...
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Nabble
are showing around 30.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Nabble-tp5879478p5879478.html
Sent from
Julian, G4ILO wrote:
As of this moment, Nabble is showing just one post for Jan 1, yet the
qth.net archives for January 2011 are showing around 30.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
Rather than try to listen for zero beat I offset the dial reading by 1kHz and
use a computer sound card program to measure the frequency of the audio
tone. Fldigi is a good program to use for this.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http
the IF
output I probably assumed it was on the KXV3. Pity I don't have the required
value of 1/8W resistor handy or I could have done the mod at the same time
as I added the jack for powering the KXV144.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http
modification.)
Julian, G4ILO
Dick Dievendorff wrote:
The P3 does not require the KXV3A, the original KXV3 works fine. The main
addition for the A has to do with a new TMP connector for the K144XV.
Dick, K6KR
On Dec 27, 2010, at 0:43, cx...@4email.net wrote:
Does Elecraft keep
the results to a web page, of course.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Automatic-beacon-scanner-program
to enforce compliance is impossible
because of high legal fees. The RSGB wanted to mount a legal challenge to
Ofcom's failure to act on the problem of PLT devices and was informed it
would cost £200,000 just to get started, about 10 times the amount they'd
managed to raise by appeal.
-
Julian
and IMD performance is
unimportant, the alternative is QRT. Which would you choose?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft
in dread of the day when a neighbour installs solar panels. From
the same mag one ham experienced S9+ interference from a neighbouring estate
and after a year's investigation Ofcom informed him there was nothing they
could do about it.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http
was on so he could
call on exactly the same QRG. I didn't think he meant internet spotting at
all. Strange how two people can read one post and get completely different
ideas of what he was saying ... :)
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http
vibrations inside the K3
case.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-RX-spurs-tp5766108p5766251.html
and feature-lacking but interesting
ADAT ADT-200A. Could the K3 do that?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2
items that
support it
So it must be cheep. I figure it is a lack of will on Elecraft's part.
As to the negative comments...Can't and won't never did anything.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune
to
whatever-it-is adapter cables to use with our K3s.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-USB-port
in the documentation that describes
what
this connector is for. Have I overlooked it? Can someone please tell me
what that connector is for?
Factory test purposes.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
is it's a product of the fact that a lot of things in the K3 are
controlled by software, which does not want to make sudden changes to things
that would normally be expected to remain constant. It's just one of the
quirks of the K3 that you get used to.
-
Julian, G4ILO. K2 #392 K3 #222
.
Julian, G4ILO
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-glitch-canceling-CW-using-KY-tp5710873p5711661
accidentally tuning or
transmitting with no load. A variable length hold setting would be nice
but not sure how high on the list I'd place it.
For that situation a better solution might be a configuration option to
disable switching to Antenna 2.
-
Julian, G4ILO. K2 #392 K3 #222
different
settings using my XG1 to generate 50uV and 1uV signals and observed the
audio output on a scope, then it became clear what was happening and how the
adjustments affected things.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com
the
front panel socket when I want to use headphones.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Speaker
that supports the DB command on the website for
someone who asked, but it is only available as a zip file that you must
install yourself: http://www.g4ilo.com/files/kcomm.zip .
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
I normally run 50W in CW or any digi mode, because I feel more comfortable
running well within the ratings, but I will always crank it up to 100W when
needed.
In a contest, you're listening half the time anyway, so 50% duty cycle and
the K3 will take it even at 100W output.
-
Julian, G4ILO
the firmware couldn't select the
polarity automatically to match that used by the decoder?
Julian, G4ILO
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http
list: http://www.qsl.net/donate.html
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/NCDXF-IARU-Beacons
on here
regularly but hasn't posted since May 18. Possibly Don sold his K3 and was
no longer interested, but it's a shame that it was pulled without giving
anyone any notice as even if Thom no longer wished to host it, someone else
may have volunteered to take it on.
Julian, G4ILO
-
Julian
this
I've only used the handle maybe twice) is there a permanent fix, such as
a locking nut?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http
?)
Even if the output were still 100W I'd still find it an attractive option,
just for the better linearity.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message
, which frees up the on board sound card
for digital radio use. Despite comments in various places to the contrary,
I've always found the built-in audio chips to work pretty well for digital
modes.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http
Is there any likelihood of blank P3 cases being made available in the future
(as with the EC1, EC2) for people who would like to build their own matching
accessories?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune
that USB sound cards do
deliver a poor quality signal.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-and-USB
the new Kenwood is that it doesn't have an IF out.
I
think they shot themselves in the foot on that one.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message
and the K2.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-and-USB-to-Serial-for-Radio-Control
.
Might just be a case of the wrong FSK polarity setting in the CONFIG menu?
Never having used FSK before, I didn't even know there was such a setting. I
just used DATA MD to set RTTY 75 as directed. I'll have a look and see if it
makes a difference. Thanks.
-
Julian, G4ILO. K2 #392 K3 #222
(maybe 240w) but that will net more than 12w would (180w).
The transmit IMD will get worse very quickly as you exceed 12W. You will
then be amplifying all these IMD products.
It depends whether you want to sound like a US station or someone from
eastern Europe!
-
Julian, G4ILO. K2 #392 K3
sending.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-CW-Decoder-Not-very-good-tp5180238p5180926.html
KK7P wrote:
Might just be a case of the wrong FSK polarity setting in the CONFIG menu?
Yep, that seems to be the answer. CONFIG FSK POL has to be 1.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http
.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc
1 - 100 of 1097 matches
Mail list logo