Hi "List",
hi Elecraft,
a small finding using macros and setting Audio (AF):
- you can change volume using AF knob - for sure :-)
- AF LIM ist set to nor 030
- set audio using AF knob to 40
- check audio level with terminal: AG$; AG$040; - check!
- set audio to 040 in terminal: AG040;
- Now you
gt;
>> If you must use the CW memories, you must switch to CW mode and set the
>> frequency above or below the SSB frequency. Perhaps a macro could be
>> created to do that with one button push, and another to go back to SSB.
>>
>> 73,
>> Don W3FPR
>>
>
to do that with one button push, and another to go back to SSB.
>
> 73,
> Don W3FPR
>
>
> On 7/27/2017 8:39 AM, Martin Theodor Grewe wrote:
>
>> Hi Don,
>>
>> thanks for your answer and Explanation. CW WGHT is known but not helpful
>> in this case.
>
f.
> With it turned on, your CW will be transmitted when touching the paddles
> even though the mode is in SSB. Your signal will be heard by the other
> operator (listening in SSB mode) at whatever sidetone pitch you have set in
> the KX3.
>
> 73,
> Don W3FPR
>
> On 7/17/2017
Hi Elecraft,
and also a "high five" to David - met you on "HAM radio 2017" at QRP
project!!
Thanks for your time and the nice discussion.
Now my very special problem I try to post to the "masses" to explain
how to improve transverter work at frequencies from 23cm up to 1.5cm with
KX3.
Hopefully
5 matches
Mail list logo