[Elecraft] FS K3

filters. 2, matching 8 pole 250 MHZ CW filters. All cables, manuals, and Fred Cady book. Cosmetically 9/10 Non smoking environment Shipping to CONUS only $2400.00 NF8J Paul VanOveren Grand Rapids, MI 49321 616 541-3378 pauln...@gmail.com

[Elecraft] test

NF8J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email

[Elecraft] FS K3

K3, serial # 758 100 watt module K3ATU Automatic Antenna Tuner, provides 2nd antenna input KRX3-F 2nd Receiver, Factory installed KDVR-3 Digital Voice Recorder, Factory installed K3DSP DSP Board upgrades, Factory installed KIO3 Digital IO Board, provides separate

[Elecraft] For Sale:

Elecraft K3, ser # 758, 100 w module, 2nd receiver, ATU w/2nd antenna input, DSP board upgrade, Digital Voice Recorder, KIO3 Digital i/O board w/receive ant input. 2 - 2.7 SSB filters, 2 - 5 pole 500 KHZ matching CW filters, 2- 8 pole 25KHZ matching CW filters. 15 factory performed hardware

[Elecraft] K3 for sale

Very nice Elecraft K3 for sale. SN #758 Included options are KPA 100, 100 watt module KT3A Internal antenna tuner w/2nd SO239 input KIO3, digital interface KRX3 second receiver module KXV3 Receive antenna interface option K3DVR Digital Voice Recorder K3FLA 250 hz CW filters 8 pole matching (2)

[Elecraft] FS K3

Selling the house and moving to an apartment so selling my beloved Elecraft K line. K3 serial # 758 100 w module KRX3-F 2ND RECEIVER Factory installed KFL3A 250 HZ 8 POLE FILTERS (2) Factory installed. KFL3A -500 HZ Factory installed. KDVR3 Digital Voice Recorder Factory Installed

[Elecraft] FS, K3, P3 w/svga.KPA 500. W2 Wattmeter

Moving to a condo and have the following for sale. K3, #758. 100w. ATU, ANt tuner KRX#, second receiver KXV#B. I/O, receive ant board. KDVR, digital voice recorder KFL3A 500 matched CW filters KFL3A 250 matched CW filters Has upgraded DSP board $2800.00 P3 Panadapter w/SVGA

[Elecraft] QSLS from VP8STI and VP8SGI

My contacts with S Sandwich and S. Georgia in ARRL LOTW this morning...did not think this was going to happen til the Fall, but they are there. # 343 and 344 for me... NF8J -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

[Elecraft] SSB shift frequency

Somehow, I have evidently changed something on my K3. When I change from CW to SSB, the FC is 1.75 instead of 1.50, so I have to move it to the left to get it back to 1.50. How do I get it set to 1.50 and stay there on all bands. I cant tell if it is band specific or not. NF8J Paul

[Elecraft] Love me K3 line

I have worked both S Sandwich and S. Georgia Islands on 4 bands and CW and SSB for ATNOs, # 343 and 344 for my DXCC credits. When I sold my Alpha 374 3 holer amp and purchased the KPA 500 I was somewhat concerned about the pwr output difference. However I have worked probably 15 ATNOs since the

[Elecraft] Linking VFO s

I can not link the VFOS, an instantaneous push turns on the SUB receiver ok, but anything longer that an instantaneous push, indicates DIVERSITY on the B display. There is no inbetween, where it would show Link or Unlink. Is there some menu setting I am missing? Paul, NF8J

[Elecraft] text display on p3 external monitor

Somehow I turned off the text display on the bottom of the P3 external display. I can not find in the Cady book how to turn it back on. Help please.!! The text display is working fine in the K3. NF8J Paul __ Elecraft mailing list Home:

[Elecraft] HRD DM780 QUESTIONS

Just getting back into psk and everything working ok, except cannot remember settings to populate the Add Log Entry window with the call signs that appear in the receive window. I want to be able to click on a stations call sign that is calling CQ and have the call sign appear in the log entry

Re: [Elecraft] Phonema Speaker for K3

I use the Yeasu Vertex mobile speakers (2) with my K-line, and my K3 has the sub receiver and they seem to work very well. I wear hearing aids and have tinnitus and when in CW mode, no problems. I use the Yamaha c-500 headset/boom mike when I operate SSB. The speakers are hooked to the back panel

[Elecraft] Lost text decode on P3/SVGA

Some how I lost the text decode on the P3, can someone please tell me how to turn it back on? NF8JPaul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Video of N1O using 2 K3s, in WRTC contest last weekend.

2 Russian operators in WRTC World Championships using Elecraft K3 transceivers. https://www.youtube.com/watch?v=q64vzx2_-1Y Paul NF8J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] WRTC-2014 fun

Jan, I had fun also, with my K3, operated about 7 hours total, 74 yrs young is too many to stay up all nite, Made 314 cw qsos, and worked 54 of the 59 stations, a total of 98 times on 3 bands, 20, 40 80. Missed 5 for a clean sweep of all 59. Those ops were unbelievable, pulling one call out of

[Elecraft] K3 Losing sub receiver when I put SPLIT on...

I am experiencing cockpit error. I have pushed a button somewhere on the front panel and lose my audio on the sub receiver when I go into split mode...what can I do to recover that capability?? -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

[Elecraft] OT upcoming dxpeditions

With Banaba in the log on 5 bands now, need ONE more for the Honor Roll. Anyone here know of any upcoming DXpediitions to Baker Howland, Bouvet, Eritrea, Mellish Reef, Pratas Isl, San Felix, S Georgia, or S.Sandwich...anxious waiting for one of them, or more 73, NF8J -- Paul VanOveren 5911

[Elecraft] Glitch in N1MM

. and no love...still want to send the current time, can anyone help... 73, NF8J -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] K3 Front Panel

://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.**htmhttp://mailman.qth.net/mmfaq.htm Post: mailto:elecr...@mailman.qth.**net Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Paul

[Elecraft] Lost CW decode on P3 SVGA display

Somehow I have lost the bottom portion of the P3 SVGA display on my large monitor. Can someone tell me how to get it back ? The waterfall and spectrum displays are fine... -NF8J - Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

Re: [Elecraft] P3 point and click with mouse

://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

Re: [Elecraft] Elecraft Speakers for K3

/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

[Elecraft] Chinese Broadcast on 18 .180.mhz

Anybody else hearing this, 9:00 EDST in Michigan s-9 NF8J -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] Is ham radio a sport ??

The link is to a 1958 Sports Illustrated article, about Ham Radio being a sport. If you have seen it before, sorry for the bandwidth, but I found it interesting reading, maybe some others will also... http://sportsillustrated.cnn.com/vault/article/magazine/MAG1002473/index.htm -- Paul

[Elecraft] P3 Question ?

to right, with the waterfall trace trailing from right to left of course and then within a couple of minutes (guessing at the time) exits off the screen, not to be seen again. Is this normal, anybody else seeing this?? Noticed it on 17 and 20 meters, have not checked the other bands yet... -- Paul

[Elecraft] Signal comparison k3 vs p3

Just listening to 9a2na on 15 metersS-9 on the K3 S meter and about S5-S6 on the P3 and also on the larger monitor, SVGA...How do I get them to match each other?, or at least be somewhat similar strength.? NF8J Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

[Elecraft] What monitor to use?

The SVGA card arrives for my P3 today and I have the opportunity to get a free flat screen monitor 1024 x 768 resolution. Just wondering if that is sufficient or whether I should purchase one with more/higher resolution? Advice anyone.? NF8J -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616

[Elecraft] SVGA BOARD FOR THE P3

adding the board and the larger display. Your comments would be most welcome, either on the reflector or direct. Thanx. NF8J Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149 __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] Meteor explosion in Chelyabinsk, Russia

km South of Chelyabinsk. The hit wave came 6+ minutes later and was very strong as mother said. That's how it was. I now feel like I trust in God more and more... 73's GL, Willy UA9BA Пятница, 15 февраля 2013, 21:37 -05:00 от Paul VanOveren p...@nf8j.com: status after the Meteor hitting near

Re: [Elecraft] KX3 in the ARRL International DX contest

support this email list: http://www.qsl.net/donate.html -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] K3 + Icon

Somehow I now have the + icon on the display, lower right, between the Bvfo and the T for the CW text decode. I know not of how I put it there and want to know how I turned it on, and how I can turn it off. Tnx, NF8J Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

[Elecraft] + icon K3

answer, but thank you for your attempt K3, KPA500, P3, W2. NF8J Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] Wonderful endorsement

Both of the current dxpeditions TT8TT, Chad and 3B9SP, Rodriques Island, are/am using Elecraft K3’s and KPA 500’s. And my K3, KPA500 and P3 have them in my log several times... NF8J Paul VanOveren Alto, Mi __ Elecraft mailing list

[Elecraft] K line makes it sooooo easy

for 3 wonderful pieces of equipment NF8J Paul VanOveren Alto, Michigan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] New software

For those hams that are also sailors, there is a new software for Android, phones, tablets, from Wolphi.com., called Droid Navtex. Wolfgang, W8DA has previously published Droid PSK, Droid RTTY, Morse Decoder, Morse trainer, etc and now added the Navtex software. I have no financial interest in

[Elecraft] Adding new countries to Ham Radio Deluxe

on the reflector.. I have tried myself, but no success NF8J Paul VanOveren p...@nf8j.com K3, P3, KPA500, W2. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

Re: [Elecraft] CY9 cw note

Sounds ok here in Michigan. Paul NF8J -Original Message- From: W4CCS Sent: Sunday, July 29, 2012 10:55 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] CY9 cw note Sounds clear and clean on K3 # 2090 in South Georgia W4CCS On 7/29/2012 10:51 AM, Rick Stealey wrote:

[Elecraft] Am I missing something?

I saw a couple of references here on the reflector about the 4.51 Beta firmware now being a production release. I do not see it on the Elecraft website under firmware category and I checked in the K3 Utility 1.12.3.28 ver.Mine reads MCU

Re: [Elecraft] Fwd: Am I missing something?

Message- From: Dick Dievendorff Sent: Saturday, July 07, 2012 10:14 AM To: Elecraft@mailman.qth.net ; Paul VanOveren Subject: Fwd: [Elecraft] Am I missing something? There is no mechanism in the K3 Utility to change the FTP source URL. Copy new files from Elecraft always goes

[Elecraft] qrz now back up

QRZ now operational in Michigan.. NF8J Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] Happy But Very Sad

You read one bad review on Eham and make that kind of statement.. .Out in the real world the K3 has a bad rep for splatter and imd3 pro I have K3 # 758, now over 4 yrs old, and have run it at 100 watts (as recommended) barefoot, into a Alpha 76 PA @ 50 watts and now into a Elecraft KPA 500

[Elecraft] P 3 COCKPIT ERROR I AM SURE.

I must have changed something in the configuration of my P3... With the cursor type set as “bar” and in the the “finest” rate, 3 # to the right of the decimal, everything is fine. In the next coarser rate, 2 # to the right of decimal, I get a line, like the B marker is on, on the left edge of

[Elecraft] P 3 Cockpit Error

Sorry for the bandwidth guys, found the MENU: VFO B Cursor, now turned off.. 73 Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] YEMEN 7O6T CONFIRMED

For those that use LOTW, just checked my log and the 7O6T Yemen operation from last month is already uploaded into my log in LOTW, at 08:52Z today. You might want to check your log...outstanding. Originally they said it would be not be uploaded until the end of November 2012. I also

[Elecraft] KX3 in Russia

Just worked Igor, UA9CDC on 20 meter phone @ 01:22z, from the Ural Mtns in Russia and he was using his new KX3 and driving a Expert amp to about 350 watts he stated. It sounded really nice. I have worked several on CW but this was the first on SSB for me... NF8J Paul

[Elecraft] K3 back from Elecraft

My K3, # 758 just arrived in Michigan from Aptos with the new 2nd receiver,DVR, 250HZ CW filters, upgraded DSP board and a P3 kit also. Now just have to wait for the UPS truck to come up the driveway. Today will be a fun time at my house...can’t wait to get the station put back together

[Elecraft] For Sale

anymore. Please contact me off list @p...@nf8j.com Paul VanOveren 5911 Snow Ave. Alto, Michigan 49302 616-690-2674 Cell K3 # 578 KPA-500 # 292 W-2 P-3 on its way. __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] KX3 ON THE AIR.

Saw a dx cluster spot for VP2MUN and a mention that they are using KX3s’ and Buddipole antennas. One of the ops is N7UNH Guy Hamblen. worked him first call and the KX3 sounded great. Right now he is on 28.060 CW... NF8J Paul __

[Elecraft] Ham Radio Apps for Android Phones

, NF8J Paul VanOveren Alto, Michigan 49302 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net

Re: [Elecraft] Ham Radio Apps for Android Phones

/05/2012 05:34 PM, Paul VanOveren wrote: My good friend, W8DA has written several apps for Android phones and Android Tablets /with a simple interface also transmit, PSK, RTTY and SSTV. You may further investigate his applications by going to: www.wolphi.com This is interesting, It begs

Re: [Elecraft] Elecraft CW Net cancellation

Does it really matter if the report is 559 or 599, the important part is that you get the call sign CORRECT and the zone, country, serial # or power. That is what the contest managers require, that you can copy all the information correctly. As mentioned earlier, the 599 is more or less a

[Elecraft] WHAT GREAT SERVICE

Sent an email Wed evening to the Parts dept @ elecraft, had one of the original RF concentric knobs on my K3, # 758, May of 2008 finally split open...Received a email Thursday am that Elecraft would send me replacements, NO CHARGE. They were shipped USPS on Thursday and I checked the tracking #

[Elecraft] HK0NA Malpelo DXpedition

Worked them on their first “real” day today... on 12,15 17 20 meters with the K3 (758) and the KPA 500 (262), TH11DX at 95’, what a hoot, # 335 DXCC for me. Way to go Elecraft, love your equipment... NF8J Paul Grand Rapids, Michigan

[Elecraft] QSK OFF

Is there a way to shut off QSK in CW mode? I only find SEMI or FULL NF8J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] No Vox, K3

Thought I would restore the latest configuration saved in the K3 Utility. FIXED the problem, guess something got corrupted somehowtnx to those whom might have suggested some fix. NF8J Paul __ Elecraft mailing list Home:

[Elecraft] How to do soft or hard reset.

I have searched the manual and can not find how to do a hard or soft reset of K3 # 758.can anyone help me. Tnx, NF8J, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] New DXCC ST0R, Southern Sudan

As of this morning, they have made 117,094 Qso’s, worked 174 countries and all 40 DX Zones, and 3 of the 5 stations are using K3’s of course, pretty impressive. NF8J __ Elecraft mailing list Home:

[Elecraft] KPA - 500 # 292

Finished the kit today, about 4-5 hrs time wise, love it so far, great reports, audio, etc. Everything worked fine except the amp talking back to the K3. It would follow the band changes from the K3 to the amp, but not the other way, had to set the menu AUXBUS to ON. (the default is OFF)

[Elecraft] KPA 500 Kit arrived.

USPS just delivered my amp kit, shipped from California on Thursday and arrived in Grand Rapids, Mi today. Now the fun of assembly begins, serial # is 292... Paul, NF8J __ Elecraft mailing list Home:

[Elecraft] TEST ONLY

Sorry for the bandwidth... NF8J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

[Elecraft] Really neat Android Applications

I have no financial interests in this, but a ham friend W8DA, Wolfgang has developed some very interesting applications for ham use on an Android phone or tablet. They are a Morse trainer, Morse decoder, DX Cluster, Psk31 decoder and transmitter, DSP filter, DX beacon, etc. You can find these

[Elecraft] This is weird. K3

the resore K3 configuration button. Presto, signals back, power control normal, ATU clicking again, Tune fuction reading swr and power...I am so glad, but can anyone tell me why removing the cable from the laptop to the K3 evidently corrupted something? Sincerly, NF8J Paul VanOveren 5911 Snow Ave. Alto

[Elecraft] p3 question ?

with the procedure would be appreciated. Paul VanOveren 5911 Snow Ave. Alto, Mi 616-868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] K3 Problems

BlankPlease disregard the previous querie. after unplugging the USB from the laptop to the RS 232 connection on the K3, the problem has resolved itself and the K3 is operating normally, must have been something to do with the Window XP updates, love them... NF8J Paul VanOveren 5911 Snow Ave

[Elecraft] QRZ ?

Blank QRZ is working ok here in SW Michigan NF8J Paul VanOveren 5911 Snow Ave. Alto, Mi 616-868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] Glitch with N1MM and K3

, the program changes to Search and Pounch and then after typing in the call of the other station, hitting enter sends the reply correctly, the call of the other station and the report..but F2 and F3 do not function. Sincerely, NF8J - Paul VanOveren 5911 Snow Ave. Alto, Mi 616-868-7149

[Elecraft] Anyone seen the qsl cards from TX3A, CHESTERFIELD ISLANDS.

BlankSorry for the OT bandwidth, but curious if anyone has received their cards for the TX3A dxpedition?? 73, NF8J Paul VanOveren 5911 Snow Ave. Alto, Mi 616-868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] ON4UN

BlankJohn is on 14.205.5 with one of his 2 K3's and is 20 +++ over in the states, working only USA. Paul VanOveren 5911 Snow Ave. Alto, Mi 616-868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] Minor problem

Tonite when I entered the CONFIG MENU, the display reads,Auto and KAT3 and I can not change it with the B vfo knob... in the MAIN MENU, it reads Auto and some funny marks in the b vfo displayhelp !!! Paul VanOveren

[Elecraft] Email address change

if you would make that change, I would appreciate it, MERRY XMAS AND HAPPY NEW YEAR TO ALL !!! PAUL VANOVEREN 5911 SNOW AVE. ALTO, MI 49302 616-868-7149 616-690-2674 CELL n...@wolphi.com __ Elecraft mailing list Home: http

[Elecraft] I screwed up.

Playing around with my K3 serial # 756 and the setting for N1MM and changed the DTR-RTS, or PTT settings and now the radio is in transmit always on the 60 meter band and when I push the MENU, COFIG button, the firmware version comes up, but if I rotate the B VFO to try and get to some other

[Elecraft] K3 - Great customer service

Had the two knobs split on the AF shaft of my K3- serial # 758 last Friday. Sent a note to Elecraft Parts, had an email back Saturday and the two new knobs arrived in Michigan today, Wednesday the 29th. One more example of OUTSTANDING CUSTOMER SERVICE from the gang in Aptos... 73, NF8J

[Elecraft] K3 - Cockpit erro

Yesterday, when fooling around in the Config:Menu, and experimenting with the TX-EQ, I must have hit some buttons by mistake. My CW memories, set up in the Elecraft Utility, no longer work as before. Now the TX EQl info shows up when I push on the the M1-M4 message buttons... Can someone

[Elecraft] K3, Cannot key amplifier

directly into the K3, but this does not make any difference. I used it on Field Day, without the amp of course and it performed flawlessly. The K3 has the 100 watt module, the ATU, KXVC module. Sincerely, NF8J Paul VanOveren 5911 Snow Ave. Alto, Mi 49302 616-868-7149

[Elecraft] K3 wierd action.

# 758 and the firmware is 3.11 and the DSP is 2.15. Anyone have a suggestion of something I might ch eck. NF8J Paul VanOveren Alto, Mi. n...@iserv.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] K3 Wierd action

intermittently while in the data mode. Again thanks to all those who helped.. Sincerely, Paul VanOveren NF8J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] K3- problem with no text on psk31, 30 meters

My local friend put up a new 30 meter dipole and we had made contact on 20 meters psk, no problem. When I changed the K3 to 30 meters and called him, he said I had only sent a carrier, he could hear the psk signal, but NO TEXT.. I noticed on the the display a T in the lower right corner of

[Elecraft] K3 new firmware ?

DSP 1 01.88 01.77 DSP 2 N/A 01.77 I click on CHECK VERSIONS NOW. SEND ALL FIRMWARE TO K3 Nothing changes after pwr off, pwr on. What am I not doing correctly... NF8J Paul VanOveren

[Elecraft] k3 firmware update.

I am running the 2.02 version of the firmware, I believe there is a released version 2.10, plus two new Beta releases.2.13 and 2.15. ...when I go to the utility and it lists 2.02 on the K3 and 2.02 as the available firmware for update...did I miss something ?? Paul NF8J K3 758

[Elecraft] K3 - no rf in data mode (psk) after download of firmware.

) worked before I screwed it up. Tnx, Paul VanOveren, NF8J ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman