Re: [Elecraft] Dual Radios Single Logging

Ross I do not know how Logic 9 program works. I am using Logger32 program. It supports 2 radios. In my case K3 is configured as Radio-1 and IC7300 as Radio-2. QSO can be logged on the same Logbook whichever Radio I use. Logger32 supports RTTY, PSK31 etc with implemented MMTTY/MMVARI engine,

Re: [Elecraft] Button malfunction on K3 panel

and the problem went away and has not recurred. Dave Hachadorian, K6LL Big Bear Lake, CA -Original Message- From: ayoshida Sent: Friday, September 18, 2015 6:28 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] Button malfunction on K3 panel I especially notice annoying malfunction

[Elecraft] Button malfunction on K3 panel

I especially notice annoying malfunction on buttons, Band/Up/Down/VOX/QSK, Mode/Up/Down/ALT/TEST and SUB button. These are controled by external software commend with no problem. For me multiple function button seems crazy, not easy to use. I have K2 where same kind of buttons (simple TAP and

[Elecraft] K3 Sub button

K3 FW 05.14 I do not know when it started this problem, however short holding and long holding Sub button always initiate Diversity mode. I tried SWH48; command with same result. So I can not initiate Link/Unlink. Any idea ? 73 de aki ja1nlx

Re: [Elecraft] K3 Sub button

Dick Ooops.I missed this note. I appreciate your suggestion. Thanks 73 de aki ja1nlx -Original Message- From: Dick Dievendorff Sent: Friday, June 19, 2015 12:00 PM To: 'ayoshida' ; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 Sub button Check the firmware release

Re: [Elecraft] KX3: SDR Software Solution!

John I am using VSPE software to share serial port for NaP3 and Logger32 logging program. SDR program is NaP3. I have not found better way to add virtual PX3 for KX3 except this. I sometimes have unexpected error on NaP3 though... 73 de aki ja1nlx On 2015/03/31 7:19, John Reilly wrote: I have

[Elecraft] KX3/KXPA100 in Fiji

Hi all Recently I operated 3D2YA in Mana Island, Fiji with KX3/KXPA100. About 3600 QSOs were logged using N6BT Bravo-5 vertical Dipole. All worked as expected. Thanks Elecraft !!! If you are interested then look at following page, Picture gallery. http://www.asahi-net.or.jp/~yy7a-ysd/ja1nlx.htm

Re: [Elecraft] K3 and YAMAHA CM-500

:45), ayoshida wrote: If CM-500 is connected to rear panel mic jack it works fine, however if it is connected to front panel mic jack via conversion connector I have a very low mic lebel with max mic level setting. If CM-500 is connected to KX3 it works fine. CM-500 mic plug to 8p plug connection

[Elecraft] K3 and YAMAHA CM-500

If CM-500 is connected to rear panel mic jack it works fine, however if it is connected to front panel mic jack via conversion connector I have a very low mic lebel with max mic level setting. If CM-500 is connected to KX3 it works fine. CM-500 mic plug to 8p plug connection in conversion

Re: [Elecraft] K3 and YAMAHA CM-500

3:45 AM, ayoshida wrote: If CM-500 is connected to rear panel mic jack it works fine, however if it is connected to front panel mic jack via conversion connector I have a very low mic lebel with max mic level setting. If CM-500 is connected to KX3 it works fine. CM-500 mic plug to 8p plug

[Elecraft] KXPA100 weight

I am interesting in weight of KXPA100 with ATU. I see two different number, 2.42 Kg in the manual and 7 lbs (anbout 3.2Kg) in the Elecraft web page. Which is correct weight ? 73 aki ja1nlx __ Elecraft mailing list Home: