I want to thank AB3AP for the K2 parameter program; it is nice to be able to
record all the settings on my K2. I found one thing that maybe of interest
I found when I ran it if the real time clock is on it takes about 3 minutes
to run vs. the real time clock off it takes about 2 minutes 15
Hi Mike
The K2 program compiles fine locally on my Windows 7 PC and runs without
security warnings now. Thanks!
--
If you reply to this email, your message will be added to the discussion
below:
Actually, the K2 settings are quite stable. I would recommend using
this software to record the settings right after an alignment, then
remove the cable.
If the BFO settings are to be re-installed, know that the 4 MHz
Reference Oscillator may have drifted since the last alignment. If it
is
With this software, there is an increased temptation to leave the
internal counter probe connected inside the K2.
While that is OK for the K2/10, for the K2/100 the probe should not be
left plugged in because it can couple BFO harmonics into the KPA100
resulting in spurious emissions.
Hi Don
Yes, you are right. So the software should only be used right before/after
adjustment and then the cable should be removed.
Indeed the K2/100 I just had here had the cable plugged in, but that was
not because of this software. I think it was just because the previous
owner didn't know
Hi Sverre and all,
I just recompiled the programs so that Java Web Start is no longer used.
I have only a linux machine to test things on, so can't guarantee
things will run properly on other OSes at this point. Please email me
offlist if things don't run.
A few quick things about
Didn't realise it existed!
Will certainly be sorting the software today for my K2/100.
Regards
Ken.. G0ORH
Sent from my iPad
On 9 Mar 2015, at 02:00, Brian Denley b.den...@comcast.net wrote:
Nice programs for the K2! I hope he finishes the filter settings program.
That looks very
!
Hoping to be proven wrong,
Ken - ke4rg
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Sverre
Holm (LA3ZA)
Sent: Sunday, March 8, 2015 4:40 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K2 Settings Retrieval Software
I just wanted to remind
Hi all, and apologies that my Web Start effort causes problems on
Windows 8. (I'm a linux user and was unaware.) Some quick ideas:
1. I am glad to recompile the code to not use web start.
2. I realize I never made the source code available, an oversight.
If either or both of those will be
(LA3ZA)
Sent: Sunday, March 8, 2015 4:40 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K2 Settings Retrieval Software
I just wanted to remind the list of the AB3AP software found on
http://udel.edu/~mm/ham/elecraft/
I'm especially fond of the software for K2 Settings Retrieval about which
he
Hi Mike
Good to hear from you. I don't really know what it takes to make the
programs more useful. All I know is that everything that has to do with Java
has gotten more and more difficult to use, especially for Windows users. I
am running Windows 7 here myself.
Therefore, after quite some
I just wanted to remind the list of the AB3AP software found on
http://udel.edu/~mm/ham/elecraft/
I'm especially fond of the software for K2 Settings Retrieval about which
he says Save your K2 set up in case of an unexpected reset.
I have just serviced a K2 where the previous owner had had
Nice programs for the K2! I hope he finishes the filter settings program.
That looks very handy.
Brian Denley
KB1VBF
Sent from my iPad
On Mar 8, 2015, at 4:39 AM, Sverre Holm (LA3ZA) la...@nrrl.no wrote:
I just wanted to remind the list of the AB3AP software found on
13 matches
Mail list logo
