on the P3, and
transmit power is nil.
Any suggestions would be most welcome.
73,
-- Dave, N8SBE
Original Message
Subject: [Elecraft] K3 no xmit, no receive?
From: cx...@4email.net
Date: Sat, May 30, 2015 11:08 am
To: elecraft@mailman.qth.net
Cc: k3supp
: [Elecraft] K3 no xmit, no receive?
From: cx...@4email.net
Date: Sat, May 30, 2015 11:08 am
To: elecraft@mailman.qth.net
Cc: k3supp...@elecraft.com
Hola,
I was scheduled to operate my K3 as a remote for the WPX contest.
Problems with VPN at remote site delayed that setup. As contest time
approached, I
On Sat, 30 May 2015 10:34:31 -0500 James Wilson w4rk...@gmail.com
writes:
Tom,
Since you receive white noise, before you dive into
the K3, consider that there is an item that is common
to all three antenna inputs. - The BNC connector
and coax to the BudiPole.
Try another independent
Hola,
I was scheduled to operate my K3 as a remote for the WPX contest.
Problems with VPN at remote site delayed that setup. As contest time
approached, I decided to deploy my Buddipole out the apartment window
and was gonna play around with 100w and dipole config.on 15m.
However, I could not
Tom,
Since you receive white noise, before you dive into
the K3, consider that there is an item that is common
to all three antenna inputs. - The BNC connector
and coax to the BudiPole.
Try another independent antenna into the antenna
input you have active. Just a few feet of wire as an
All,
My K3 does not have the option that provides for the third antenna input
(KXV3). Would the following method allow me use dual antennas for Field Day.
Use the switched 12 volt out to drive an antenna relay to make the changeover.
Will this work? Is there a better approach?
Thanks, John
John,
The switched 12V out you're referring to is switched
on with the K3's POWER and remains in an ON state
as long as the radio is on.
There is a keyed to ground connection (KEY OUT)
that -might- meet your needs to switch an external
relay, but I don't know it's current / voltage
of advice...
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Watkins
Sent: Wednesday, June 09, 2010 3:33 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 with xmit and receive antennas - advice needed
All
-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Watkins
Sent: Wednesday, June 09, 2010 3:33 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 with xmit and receive antennas - advice needed
All,
My K3 does not have the option that provides
9 matches
Mail list logo
