Glad to share what I've learned. Thank you.
73
Bob, K4TAX
Sent from my iPhone
> On Dec 3, 2019, at 11:00 AM, David Thompson wrote:
>
>
>> On Dec 3, 2019, at 07:20, Bob McGraw K4TAX wrote:
>>
>> If the WSJT Tune frequency is 1500 Hz, there is a beating between 1500 and
>> the refresh
> On Dec 3, 2019, at 07:20, Bob McGraw K4TAX wrote:
>
> If the WSJT Tune frequency is 1500 Hz, there is a beating between 1500 and
> the refresh rate of the ALC displayed value. Simply move the TX audio
> frequency up or down to eliminate this. Makes for MUCH easier adjustment of
> audio
There were known changes in the version up to resolve a bug in a previous
version.
If the WSJT Tune frequency is 1500 Hz, there is a beating between 1500 and the
refresh rate of the ALC displayed value. Simply move the TX audio frequency up
or down to eliminate this. Makes for MUCH easier
Hola Bob and Jim,
I checked all settings, I had not clicked on "Tune".
Computer sound settings were all good. Mic and spkr USB both on Audio codex.
Changed from Vox to CAT as per Bob's advice.
Still nothing until I changed the 'power slider' in WSJT-x to 100% vs
50. Then got 8 barschanged to
As I recall in the current version or maybe it was the previous version, there
was a change which affects the way it handles TX audio level. I wouldn't at
all be surprised that update a version does changes audio level. I believe it
is a bug fix to prevent audio distortion due to excessive
And make sure that your operating system has not changed your sound device
settings. Win 10 is bad about that (ask me how I know!)
On Mon, Dec 2, 2019 at 12:24 PM Bob McGraw K4TAX
wrote:
> Add to my earlier. You may need to adjust levels as previous version and
> this one will be different.
>
Add to my earlier. You may need to adjust levels as previous version and this
one will be different.
Also suggest you use CAT control and not VOX as CAT is not affected by audio
levels.
73
Bob, K4TAX
Sent from my iPhone
> On Dec 2, 2019, at 11:23 AM, cx...@4email.net wrote:
>
> Hola,
>
Check SPKR level on the computer. Also check PWR slider on WSJT-X.
Check Audio tab on WSJT, F2 Menu, Audio tab to see that both Transmit and Tune
boxes are checked. This remembers the settings per band.
73
Bob, K4TAX
Sent from my iPhone
> On Dec 2, 2019, at 11:23 AM, cx...@4email.net
Hola,
Problem with keying the VOX on the K3s with new install. Select "Tune",
it turns red but xmtr does not key VOX.
Never had this problem with v 2.0.0. Double checked USB audio codex for
both speaker and microphone. Parameters checked for Radio tab, K3s,
using usb from KIO3 to computer, com4
9 matches
Mail list logo