Thanks Andy, I can locate it from here... Having a bit more info will
help in seeing what needs to be checked!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/20/22 07:55, Andy
"I seem to remember there was a change for those wire links but don't have the
details here."
This discussion suggests there were two board configurations - one with both
links on the same side of the board and the other with one link on each side.
It's not clear when the change was made or
Andy,
If you locate those changes I would be most interested... I have a
KAT500, no issues yet, but would like to verify my KAT has the changes
if they fix something.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director,
What mode is the KAT500 in when you power up and see the wrong antenna selected?
What firmware version is loaded in your KAT500?
There was a firmware defect that could cause the wrong antenna to be selected
in BYP mode but it is fixed in the current firmware.
I seem to remember there was a
What is the setting for 10m in the KAT500 utility? The behavior you see
is consistent with 10m being set for ANT2.
Hopefully it is that simple! GL
Ken WA8JXM
>
>
__
Elecraft mailing list
Home:
I have had the KAT-500 for many years and has been very reliable despite
the abuse I have probably inflicted on which will become apparent.
Recently when using the KAT-500 I have noticed from time to time a
fizzing noise. Wasn't sure where it was coming from. Then a couple of
weeks ago I
6 matches
Mail list logo
