Re: [Elecraft] Need a tuning knob for K2

As usual, Don you have the correct answers, thanks again. Hope you are doing well! -73- FrankKG9H kg9hfr...@gmail.com > On Apr 25, 2021, at 9:53 AM, Don Wilhelm wrote: > > Frank, > > Just take the top cover off and look between the upper 2D connectors and the > Front Panel board. >

Re: [Elecraft] Need a tuning knob for K2

Frank, Just take the top cover off and look between the upper 2D connectors and the Front Panel board. 73, Don W3FPR On 4/25/2021 10:34 AM, Frank Krozel wrote: Thanks Don, will check today. I also need to figure out which K2 need those small 3/8”x3/8” rubber spacers in-between the PC

Re: [Elecraft] Need a tuning knob for K2

Thanks Don, will check today. I also need to figure out which K2 need those small 3/8”x3/8” rubber spacers in-between the PC boards without taking the front panel off. -73- FrankKG9H kg9hfr...@gmail.com > On Apr 25, 2021, at 9:27 AM, Don Wilhelm wrote: > > Frank, > > Do you have the

Re: [Elecraft] Need a tuning knob for K2

Frank, Do you have the new encoder?  I don't know which SN they were started.  That is the key to which knob you need.  If the knob is off, lift the fiber washers and check to see if there is a green tab in the hole to the right of the encoder shaft.  If the hole is empty, you have the new

[Elecraft] Need a tuning knob for K2

I am looking for a tuning knob for a K2 SN 5630 If I recall there were two different sizes of shafts, this would be the second (maybe current) size. This is SN -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home: