On 9/14/2015 2:55 PM, Luis V. Romero wrote:
>
However, I can't monitor other issues that can rear their ugly heads
in RTTY, be it modulated by FSK or AFSK with the existing
functionality available: The reason I was looking for a better visual
representation of these issues in this tool is
Alan:
You wrote:
It gets more interesting if there is a problem
in the RTTY transmitter that causes the two tones to come out at
different amplitudes, which would be easy to see on the screen.
In your example, you would see ripple in the flat waveform on the screen,
true enough.
Hello Elecraft folk:
Just installed my new P3 TX Monitor board that I ordered at Dayton (!). I
have been waiting for this capability for the P3 since 2010, so as to enable
me to monitor transmitter waveforms accurately like I did in my Heath
SB-401/SB303 station with the SB610 in ancient times
Hi Luis,
As you mentioned, monitoring the amplitude of a properly-functioning
RTTY transmitter is not very interesting. Since FSK is a
constant-amplitude modulation mode, all you see is a constant-amplitude
envelope on the screen. It gets more interesting if there is a problem
in the RTTY
Lu,
Without addressing what any hardware/software changes needed might entail, I'd
say that you are _not_ "out of line with [your] expectation" Any request
for features intended help the operator adjust his equipment for a cleaner
transmitted signal is valid in my opinion. In fact, I tip
But certainly it isn't necessary to wait around for Elecraft to provide. There
are all kinds of tried and true and well documented ways to do all of the
things.
We've apparently come to the point where we expect our radio vendor to do
EVERYTHING for us, instead if just doing it for
6 matches
Mail list logo