Looked on Amazon and there are eleventy-eight kinds of Deoxit.
Which is the right one?
On Jul 31, 2012, at 11:19 PM, FredJensen k6...@foothill.net wrote:
A drop of DeOxit on it [shield and center pin, both ends] and several
removal/insertions cured mine. Also, make sure the P3 chassis
- WE5ST
From: Pete Meier pme...@me.com
To: Elecraft@mailman.qth.net
Sent: Friday, July 27, 2012 7:17 AM
Subject: [Elecraft] P3 Vfo Blips
Hello gang,
I have a number of blips (birdies) surrounding my VFO A display line on the P3
that faithfully follow it as I
A drop of DeOxit on it [shield and center pin, both ends] and several
removal/insertions cured mine. Also, make sure the P3 chassis screws
are tight, and the chassis is directly bonded to the K3. I may put a
ground post on my P3 to take it to the ground bus right behind the rigs.
The other
Hello gang,
I have a number of blips (birdies) surrounding my VFO A display line on the P3
that faithfully follow it as I tune up and down. They are more visible on 40
meters but more down in the noise on other bands.
Is this normal behavior…to be expected?
Pete WK8S
4 matches
Mail list logo
