Hi folks,
My PX3 is up and running! The manual was a delight to follow, and
everything went together swimmingly. Thanks for all the tips -- I had
everything small neatly laid out in an egg carton, and assembling this was
probably the most peaceful hour of my day.
Here is a lousy phone picture of
Just follow the instructions.? You will need a #1 Phillips screwdriver.
Are you sure that's Phillips? I use Pozidriv (PZ0) for Elecraft screws
and find that is a much better fit.
(Either will work, but if you have one of those 100+ screw sets and have
the choice - consider PZ over PH
Finan
jimfi...@live.com
From: elecraft-boun...@mailman.qth.net on
behalf of Don Wilhelm
Sent: Thursday, September 30, 2021 4:37:00 PM
To: Julia Tuttle ; Elecraft
Subject: Re: [Elecraft] PX3 kit tips?
Julie,
Just follow the instructions. You will need a #1
Remember to take it slow and easy. Read each instruction and
make sure you understand it. Then do it, check it off on the
assembly manual, and go to the next one.
It is generally a good idea to inventory the parts so you
understand which screw goes where. The small parts can be
organized in
Julie,
Just follow the instructions. You will need a #1 Phillips screwdriver.
If you don't understand any procedure, ask here.
73,
Don W3FPR
On 9/30/2021 3:34 PM, Julia Tuttle wrote:
Hi folks,
I got jealous of the waterfall display on my girlfriend's IC-7300, so I got
myself a PX3, and
Nothing to it, you will be done in no time. The right size screwdriver helps.
Also try not to get fingerprints on the screen side of the lens. Taking the
lens off to clean them is a bit annoying.
On Thu, Sep 30, 2021, at 12:34 PM, Julia Tuttle wrote:
> Hi folks,
>
> I got jealous of the
Hi folks,
I got jealous of the waterfall display on my girlfriend's IC-7300, so I got
myself a PX3, and since the kit but not the factory version was in stock, I
got the kit. (Normally I'd be *more* than happy to pay Elecraft the $20 to
build it perfectly, but I'm impatient.)
I've got the
7 matches
Mail list logo
