: [Elecraft] Problem with K3S build
Ken,
Make sure you have the Sync board installed in the correct slot (not the slot
for the sub receiver sync board); additionally, make sure you have the cables
connected correctly at both ends of the two cables.
One additional check might be to check
Hello all. Last week I received my K3S/100 (S/N 10270) kit, including KDVR3
recorder, KRX3A second receiver, and .5ppm TCXO. After getting the kit
assembled per the assembly manual, I got to the checkout phase prior to
installing the 100W amp, and second receiver. The unit powered on as it
The fact that you're seeing PLL1 and PLL2 indicate that the firmware
thinks the older KSYN3 is installed. If it has the KSYN3A, SYN1 and
SYN2 would show in the VFO B window, instead.
With the K3S's top cover removed, do you see the KSYN3A's green LED on
solid? It's visible from the top side.
3 matches
Mail list logo