It’s a electret condenser mike element and requires bias 5.6-10k resister as
Don says.
Brian Denley
KB1VBF
Sent from my iPad
> On Jul 26, 2020, at 7:40 PM, Don Wilhelm wrote:
>
> Steve,
>
> I am not familiar with that particular mic element, but --
>
> If that is a dynamic mic element, no
Steve,
I am not familiar with that particular mic element, but --
If that is a dynamic mic element, no resistor should be used.
If it is an electret type, the normal 5.6k resistor should work fine, it
is not critical - anything between 5.6k and 10k will do fine.
73,
Don W3FPR
On 7/26/2020
Is anyone using this mic element with the K2? If so, what size resistor
did you use between MIC pin 1 and 6?
TU/73,
Steve
W1SRD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
3 matches
Mail list logo