Wayne,
If you are seeking connections for various microphones, I can suggest
you consult the extensive list of microphone schematics and pinouts
compiled by G4WPW (SK). his information is preserved at
https://www.qsl.net/g4wpw/date.html.
It does not have any 'mic quality' information, but if
I have used the Heil Goldline with a GM-4 element for over 12 years and
Always get good great audio reports on my K3.
Alan…K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have used a Kenwood MC-60, an old kenwood hand mic (no model #), A
Heil BM-10 with HC-4 element, and a Heil Proset with an HC-5 element.
They all sounded good to the people I talked to.
73, Chuck
N0NC
__
Elecraft mailing list
I have used a Kenwood MC-60, an old kenwood hand mic (no model #), A
Heil BM-10 with HC-4 element, and a Heil Proset with an HC-5 element.
They all sounded good to the people I talked to.
73, Chuck
N0NC
__
Elecraft mailing list
For DX and net, I use an old D104 Silver Eagle with a W2ENY element and
get good audio reports.
For rag chewing, I use a Heil PR77D and run ESSB.
EQ settings for both mics are set at 0dB.
I like the D104 better.
Dean
KD3ANX
__
Elecraft
A mic, what's that? LOL
When I have operated phone, I either use my old Shure 444, or, for a
headset/boom mic, a Koss SB-45 (comfortable and $50). I receive great
audio reports from either of them.
Ken WA8JXM
On Mon, Jan 31, 2022 at 10:12 PM Wilson Lamb via Elecraft <
I use a 35 year old mic from my TS-450 Kenwood.
It has a better feel than the Elecraft mic and I think it sounds better.
Wilson
W4BOH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have the Zoom Q2n video camera. I use it as a studio quality
microphone as well as a web cam and a stand alone video recording
device. I have only used a few of its capabilities too. If you need
stereo sound capability this tool works well.
73, Kevin. KD5ONS
On 1/30/22 18:59,
I use a Zoom H4n "Handy Recorder" as my primary system mike. It has a
built-in USB interface, and is powered by the USB port. I use Voicemeeter
to connect it to my KX3. I also use a USB sound dongle to run digital
modes, once again directing the correct devices to the correct software. My
whole
I currently use a Yamaha CM-500 with my K3 (s/n 261). In the past, I used a
Heil Proset 5.
73 de,
Ian, NV4C
On Fri, Jan 28, 2022, 1:54 PM Wayne Burdick wrote:
> If you're using a non-Elecraft mic with any of our radios (K2, K3, K4,
> KX2, KX3), please send me a very brief reply with the
OK I give up , since MOST of know that ANYTHING that is called a
microphone , ( maybe with the exception of a carbon mic ), can be hooked
up to an elecraft prompts the question " what is Wayne looking for ???
I have hooked up the military H250 dynamic handset , bunches of Shure
Heil HC-4 headset (the mic has a rising characteristic at 2500 Hz) on a K3s.
Using the Heil Kenwood adapter on the front Mic jack, with a Heil
footswitch plugged into the inline 1/4" jack. The headset audio has a
1/8" stereo plug, so it plugs into the rear headphone jack.
Mic settings
I can recommend the HYPERX CloudX and the NUBWO N7 www.nubwo.com with
3,5mm plugs for the connectors at the rear of K3 / K3S
73 de Chris
-DL2MDU-
Am 28.01.2022 um 19:53 schrieb Wayne Burdick:
If you're using a non-Elecraft mic with any of our radios (K2, K3, K4, KX2,
KX3), please send me a
* On 2022 28 Jan 12:54 -0600, Wayne Burdick wrote:
> If you're using a non-Elecraft mic with any of our radios (K2, K3, K4,
> KX2, KX3), please send me a very brief reply with the manufacturer,
> model number, and a note about whether any modifications were
> required. We're putting together a
HyperX - Cloud Alpha Pro Wired Stereo Gaming Headset
comes with cable to plug into rear mike and headphones jacks, bias on, works
perfectly
On Fri, Jan 28, 2022, at 11:06 AM, Bill Weaver wrote:
> Wayne,
>
> I’ve used both on the K3S
> Kenwood MC-60 w/std. Kenwood 8 pin connector
> Heil HM-10
Wayne,
I’ve used both on the K3S
Kenwood MC-60 w/std. Kenwood 8 pin connector
Heil HM-10 w/Kenwood 8 pin connector
I don’t recall that there were any problems with the up/down switches or
push-to-talk switch on the MC-60. I rarely operate phone!
73,
Bill WE5P
Comfortably Numb
> On Jan 28,
If you're using a non-Elecraft mic with any of our radios (K2, K3, K4, KX2,
KX3), please send me a very brief reply with the manufacturer, model number,
and a note about whether any modifications were required. We're putting
together a database of these for customer reference.
Thanks!
Wayne
17 matches
Mail list logo
