I recall sometime ago enquiring of Ron Stone GW3YDX at Vine (UK Acom sales)
and being told that the 1010 doesn't have vacuum relays and to go with the
1000 if I was serious about QSK.
I did just that and fully support what Rick says below about the 1000.
Stewart Rolfe, GW0ETF
Rick Tavan
Reflector
elecraft@mailman.qth.net
Sent: Tuesday, August 11, 2009 11:57 PM
Subject: Re: [Elecraft] QSK options inquiry
Who sells the Acom 1010? Can't find any dealers with a google search.
Sure looks nice.
Doug -- K0DXV
Rick Tavan N6XI wrote:
Dunno about the 1010 but the ACOM 1000 works
jdan...@cinci.rr.com; Elecraft Reflector
elecraft@mailman.qth.net
Sent: Tuesday, August 11, 2009 11:57 PM
Subject: Re: [Elecraft] QSK options inquiry
Who sells the Acom 1010? Can't find any dealers with a google search.
Sure looks nice.
Doug -- K0DXV
Rick Tavan N6XI wrote:
Dunno about
ARRL has reviewed the Acom 1000, 1010 and 2000. See QST or the ARRL
website.
The answer to all this discussion is found in this pair of sentences
from the 1010 review in December, 2006:
So what does the 1010 give up in exchange for its svelte packaging and
lower price? The short answer is
Then it would be a, wait for it now.
Little Shack of Horrors
:p
Dave Wilburn
NM4M
Lyle Johnson wrote:
ARRL has reviewed the Acom 1000, 1010 and 2000. See QST or the ARRL
website.
The answer to all this discussion is found in this pair of sentences
from the 1010 review in
I have the Acom 1000 and use it with the K3/100 (#250)...full QSK, no
problems at all with keying,(up to 44wpm) etc. I got it in 2004. I have
made over 15000 Qs with many of these Qs during contest operations,
phone, cw and rtty. I do crank it back to 500w out when running rtty so
as to run a
On Wed, 2009-08-12 at 16:50 -0300, cx...@4email.net wrote:
I have the Acom 1000
...snip...
this is
a remarkable little amp, very quiet and puts out about 600w or so. It is
NOT a 1000w amp...the specs on the tube the 4CX800 say plate dissipation
is 800w...plug in typical efficiency and that
I ordered a K3 last week. I built my K2 about 8 years ago and operate it daily.
I also have a Ten Tec Omni 6+ and a Hercules II amplifier. I enjoy the Ten Tec
transceiver and amplifier when used in contests and chasing DX. The purpose of
this email is to solicit (direct and reflector) input
Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full
QSK. I think but am not sure that the 1010 is just a recent update of the
1000. At any rate, I can't imagine them regressing. The 1000 exudes quality.
For a manually tuned, not-quite-full power amp with a warmup cycle,
And Rose has made a number of ACOM covers, so she has the
logo worked out . (:-))
73! Ken Kopp - K0PP
elecraftcov...@rfwave.net
--
Dunno about the 1010 but the ACOM
Who sells the Acom 1010? Can't find any dealers with a google search.
Sure looks nice.
Doug -- K0DXV
Rick Tavan N6XI wrote:
Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full
QSK. I think but am not sure that the 1010 is just a recent update of the
1000. At any
http://www.arraysolutions.com/Products/acom.htm
Doug Person wrote:
Who sells the Acom 1010? Can't find any dealers with a google search.
Sure looks nice.
Doug -- K0DXV
Rick Tavan N6XI wrote:
Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full
QSK. I think but
Hi Doug,
Check the Array Solutions website ...
73! Ken Kopp - K0PP
elecraftcov...@rfwave.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
13 matches
Mail list logo