Hi Dave,
I can't speak to the module you ordered, but I
received on 28 October the KPA3A 100 watt upgrade I had
ordered back in spring 2021. The effort to ship upgrades
is definitely a 'live effort,' and the Shipping Status updates
on the Elecraft web page accurately reflected the
status of the
(last post I'd seen copied below.)
Been almost 2 months since last update (9/15/2023) - still awaiting
notification of item I ordered (K3EXREF) in April 2021.
Doesn't look like any recent update to the K3 options on ship status page.
Is this still a live effort?
Thanks for refresh on this!
I’ll post this on our website.
mwold
On Fri, Sep 15, 2023 at 10:10 AM Eric Swartz wrote:
> Good news - We are now moving along smoothly on the majority of our K3
> Option purchasing, assembly and testing. Here is the latest status as of
> 9/15/23.
>
> *KPA3A 100W PA: * These should begin
Following up on my last post, I'm running about a week and a half behind
getting input for the update. I will be posting it here before the end of
next week after we all get back from the holiday weekend.
Hope everyone gets some relaxation this holiday weekend!
73, EricWA6HHQ
*elecraft.com
Thanks very much, Eric, for the comprehensive
update!
73,
Mike, K8CN
(especially glad to know about the KPA3A
being close to shipping)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
>I am at this point, after almost 3 years, uncertain of just where I
stand. I know I'm on the list for a KIO3B UPDKT...
Me too! I paid for three KIO3BUPKITs on 20 April, 2021 (to improve my
preamp situation), and have not heard a peep since.
Meanwhile, I've lost interest in 6m, so they will be
The K4 will work with all K3 accessories:
- MH4 microphone
- SP3 (but we'll also be offering an SP4)
- KPA500
- KAT500
- KPA1500
- Kpod (connects to a USB port on the K4)
The K4HD uses the same style of crystal filters used in the K3, so it may be
possible to reuse some of
I doubt it. Where the TX MON board go? There’s no O3 and no SVGA module.
I too wonder about the sensor.
Sent from my iPhone
...nr4c. bill
> On Aug 21, 2019, at 7:09 PM, Charlie T wrote:
>
>
> Sorry if this has been already answered, but are there any K3/K3S options
> that are compatible
Hello All,
A couple of people have asked me to post a summary to share what I learnt
from my question about options for a new K3. I received 25 replies, many
were off-list emails, offering well considered ideas and advice. I was
surprised at how generously people offered their time and their
, QLD, Australia
Elecraft K3# 4257
- Original Message -
From: VK7JB
To: elecraft@mailman.qth.net
Sent: Friday, January 07, 2011 10:50 PM
Subject: Re: [Elecraft] K3: options to buy: a summary of what I learnt
fromyou all...
Hello All,
A couple of people have asked me
I think you have made wise choices.
I purchased my K3 one bit at a time, starting with the K3/10. It was
a lot of fun opening the boxes each wek for the next couple of months
and installing the latest purchase. And, this is the real beauty of
the K3 design. You can add any feature you
John,
It sounds like you've made some very good choices. I have 2 K3s sitting on my
desk. One has the high-stability oscillator, one doesn't. I don't see any
noticeable difference in stability or frequency accuracy between them. As for
filters, one has a 2.7 KHz and the other a 2.8 KHz. Once
VK7JB wrote:
# About filters options:
There was a concensus of opinion that the 2.8 8 pole / 2.7 5 pole swap
wouldn't be of benefit in my situation and that I should just go with the
2.7 / 5 pole stock filter.
SNIP
I've decided that I probably WILL do the 2.8 for 2.7 swap and
Another justification for not swapping for the 2.8Khz filter is that even the 8
pole filters will need to be adjusted if you want exact alignment with any other
filters. Not a really big deal, but if you're a perfectionist...
73,
Tom Childers
Radio Amateur N5GE
Licensed since 1976
QCWA Life
That argument does not make sense to me. The front panel is not
difficult to remove at all.
Removing the front panel from the K3 is quite different than
disassembling the front panel assembly.
Of course, if you have the current budget to purchase it now, yes it is
a little easier to include it
Commenting as one who waited to install the DVR: as Don says, it's not all
that difficult to do.
That said, the DVR is so good, I wished I had purchased it originally.
So, I would recommend getting it now because it works so well - not
because of difficulty of installation later.
73,
Bob W5OV
David
The onboard tuner is pretty handy and fast tuning. I have a couple 1KW
size outboard manual tuners but still use the K3's often. If you don't
contest much and don't plan to record off the air the KDVR3 might be
overkill. Last I heard, KDVR3 won't stream rx audio to an external
device
On Mar 26, 2010, at 10:16 AM, david beckwith wrote:
I am upgrading the shack from a K2 to K3. I have a nice Palstar tuner and an
ACOM amp. I am mostly a SSB guy, not big on contests or FM. Given these
resources and needs my planned configuration for the new K3 is:
K3/100 KXV3A IF Out
You will also need a 2.7 or 2.8 kHz filter for SSB TX. The 6 kHz
filter is for AM. The 500 Hz filter is a good choice for CW and Data.
The ATU is a very slick and well-integrated device. It memorizes L/C
settings for each band, in many segments (see manual). I added the
ATU later, but in
In a message dated 11/16/2007 2:46:00 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
As others noted you can have up to 5 roofing (crystal) filters in the main
receiver. I don't recall seeing a number for the Aux receiver.
I don't know of any conflicting configuration options like
Ken Bessler wrote:
Can anyone tell me which options for the K3 preclude
other options? For example, on the K2 you cannot have
the KPA100 option unless you do not have the internal
battery installed.
Also, how many filters can the K3 take?
73's de Ken KG0WX - Kadiddlehopper #11808,
Five filter slots per receiver. The 2.7 KHz 5-pole comes standard with the
radio.
No conflicting options.
Craig
NZ0R
K3 #25
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ken Bessler
Sent: Friday, November 16, 2007 9:10 AM
To: elecraft@mailman.qth.net
Date: Fri, 16 Nov 2007 15:57:42 +
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 options
This is all in the FAQ on the website Ken. The options are all
exclusive, that is to say you can have any you want in any order. You
can
As others noted you can have up to 5 roofing (crystal) filters in the main
receiver. I don't recall seeing a number for the Aux receiver.
I don't know of any conflicting configuration options like you mention for
the K2 either, but there are A/B choices to make. For example, you can
choose
Does Elecraft have any plans to make available some EC3, EC2, or EC1
Enclosures available in the K3 paint color?
Chuck G.
Wayne replied in the affirmative...after the dust settlesin a
previous post.
Roger WA7BOC
K2 #755
___
Elecraft mailing
25 matches
Mail list logo