All of our Microwave Sites and telecommunications facilities were kept at 70
degrees and 50 percent humidity. That was from Chicago to New Orleans,
Mobile and Kansas City. I also had a 2 meter repeater here in Paducah and
it seemed to like the environment it was in. Matter of fact that's the
par
Also make sure your sound cards are set to USB Codecs in the software.
Sometimes windows has played games with me and went back to the PC's default
cards.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob Mc
Well I made the same modifications to K3 #2971 and using the USB interface
am able to do AFSK just fine using MMTTY. Sounds like there is a Gremlin
loose somewhere. I have a K3S (10858) and using a dummy load and wattmeter
and can copy everything that #2971 transmits and vice versa. I did the sa
That's where the problem was in my 2 K3S's.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Monday, April 6, 2020 1:09 PM
To: Rich ; Elecraft
Subject: Re: [Elecraft] KPA100 and Audio Issue
Ric
Well I was told by an unreliable source that the military had to have their
Amphenol's manufactured in the USA but were sent to Mexico for packaging.
Whether that's true or not I cannot confirm. All I know is the ones I buy
are stamped in black lettering saying "Amphenol 83-1sp and below that is
I use the Palstar HF-Auto for 80 and 160. The Tuner in the KPA1500 works
great on my Hy-gain 6 meter, TH11, and Hy-Tower and it only has to teak just
a hair but normally I just leave the tuner in By-Pass mode and the HF-Auto
turns into an antenna switch. Probably the best I've ever had are the Te
When I used to work on Stromberg Carlson X-Y and EMD 4-wire telephone systems
we had little burnishers the we carried all the time because of the zillion
relays with contacts. If we would forget to bring them we would use 20 or
higher dollar bills and use them as a burnisher. They had less gr
I have a K3S and use PERBAND. While in standby I'm at 100 Watts and in
operate 20 watts kind of fixes the cockpit trouble. If you don't have a K3S
or K3 You just have to be extra careful. It works just as well on my other
K3S and KPA1500. I have the KPA1500 set up when I change bands it goes in
I have the Mitsubishi system and no issues..
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Thorne
Sent: Wednesday, May 27, 2020 7:47 AM
To: Albert Reynolds ; elecraft@mailman.qth.net
Subject: Re: [Elecra
I use Win4K3suite and com0com and run 6 programs simultaneously into my K3S.
No problem, I'm running Dxbase, LOG4OM, DX4WIN, and AClog at the same time
just trying out to see which one I want to stick with. I've been using
Dxbase since 1988 and it's my favorite but no updates since a long time.
HI
Two friends have ordered KPA1500's and got them in a couple of weeks. I'm
talking a week ago Tuesday. So apparently some stuff is going out and I have
received several items myself in the last two weeks. Just minor stuff but I
got it.
Ed.. AB4IQ
-Original Message-
From: elecraft-bou
I have a HY-Gain VB-66DX and 1.4 is the normal case basically across the whole
band. I must be messing up somewhere, even the KPA1500 likes it. I have never
run it over 1200 Watts on 6 meters and never requires over 30 watts drive to
obtain 1200 out. I have three feet of 213U from amp to Pals
In the menu you will need to set MIC SEL to FP.L You can toggle it by pushing
the #1 key and turn the Bias off in the same menu by toggling with the #2 Key.
If you have the Fred Cady book a whole list of parameters for different
Microphones are listed on Page 279.
Ed.. AB4IQ
-Original Mes
Dave who had you install that in their K2?
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Van Wallaghen
Sent: Sunday, May 9, 2021 3:51 PM
To: Douglas Person ; Elecraft Reflector
Subject: Re: [Elecraft] K2 #
Get ahold of N6TV he probably has a solution. He has break out boxes that fill
almost any configuration you might need.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of b...@feldtman.com
Sent: Thursday, June 10,
I use a Keyboard, it already had rubber feet on it.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave W8OV
Sent: Thursday, July 8, 2021 6:27 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Chasing keys
I'm in Kentucky we call it White Lightening. In the Navy we used 190 proof
to clean the salinity cells.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Simmons
Sent: Wednesday, July 14, 2021 6:51 PM
To: Elec
I downloaded the Utility and Beta firmware and all is OK as far as I can
tell.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andy Durbin
Sent: Wednesday, October 6, 2021 12:48 PM
To: elecraft@mailman.qth.net
Sub
Too late folks I've already bought and paid for it. Hi Hi..
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of George Thornton
Sent: Friday, January 28, 2022 3:41 PM
To: eda...@aya.yale.edu; elecraft@mailman.qth.net
Are you running the Kat 500 in the manual mode?
Ed AB4IQ
Sent from my Verizon Motorola Droid
On Feb 9, 2018 7:26 PM, Steve Wilson via Elecraft
wrote:
>
> Hi there,
> I'm assisting my godfather with setting up a new KAT500 & KPA500 to add to
> his K3/P3.
> Issues I am having:
> 1) KAT500 makes
I hope that isn't the one I've ordered. If it is, you've got 24 hours to
get it to Kentucky. We will be at W4NJA and the CW station is my K3
upgrade, P3 and SP3.
Ed.. AB4IQ
-Original Message-
From: elecraft...@groups.io [mailto:elecraft...@groups.io] On Behalf Of N6KR
Sent: Friday, June
in KY, to much shine?
Don Jones KO7I
Original message ----
From: Ed Pflueger
Date: 6/21/19 10:17 AM (GMT-08:00)
To: elecraft...@groups.io, 'Elecraft Reflector'
Subject: Re: [Elecraft-K4] K4 at Field Day
I hope that isn't the one I've ordered. If it i
I always used a pencil eraser, worked great. On old Stromberg Carlson Switch
gear to clean the contacts I used a $100 bill. Not much grease on them. Hi
hi...
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of B
I built the N0SS amp keying circuit and just use my KPA500 and get around 350
out if needed. Not to handy thou if you want to do some operating from a
picnic table and battery power. I too would like to get the amp as well and
use the rig at field Day.
Ed.. AB4IQ
-Original Message-
F
Of all things this weekend I picked up a late model K3/10 (7928) bare bones
except it has both receivers which I thought unusual. It has the 2.7, 500
and250 filters in the main receiver and only the 2.7 in the sub. Both
Synthesizers are of the older version.
Ed.. AB4IQ
-Original Message-
A friend of mine bought a New RADIO years ago. His loving wife then bought
a Rivera, Refrigerator, and Rugs. Had something to do with the "R" word.
Hi..
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown
At W4NJA (3A) for Field Day we use three Dipoles (Cut for the low end of 80
meters) fed with 450 Ohm ladder line into a DXEngineering Balun with less
than ten feet of coax into the rig. The feed line is cut at odd multiples
and the antennas are spaced in a straight line end to end with separation
I always used Wilmore supplies to do the various tasks to convert our 48VDC.
Also used them on 72VDC equipment and never had one fail.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil Kane
Sent: Tuesday, Novem
I have a friend that asked a manufacture what was the difference between the
one model and the new model. The manufacture said "INTERNAL COMPONENTS". Just
got thru mowing a couple of acres and it's hot in Kentucky.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
Mine starts working at speed 1 around 40C. Fully automatic and 28C idle.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KENT HUFFORD
Sent: Friday, July 10, 2020 2:48 PM
To: 'N4ZR' ; elecraft@mailman.qth.net
Sub
I bought mine at Dayton about an hour or so after the opening over a year ago
and (I thought) That free shipping was included at the Fest. I've been wrong
before but can't wait to get mine. Anything worth having is worth waiting for
as I have been told. This might be just a tad later than I
I sold it to him and the Reflock is already in the unit.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Clay Autery
Sent: Tuesday, August 25, 2020 12:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3
Me too.
Ed AB4IQ ab...@comcast.net
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ron Freeman
Sent: Friday, September 4, 2020 1:43 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft PR6 Preamp - SOLD
I have
Does that mean there will be no hard bound manual? The last Ice storm we
had in W. KY we had no internet for 28 days at least at my house and others
was longer. What am I going to take to the outhouse to read? LOL
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[ma
I think Dave W8FGU might have some Fixed Audio Out and PTT Kits for Sale.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Friday, November 20, 2020 12:40 PM
To: John Daws ; elecraft@mailman.qth.n
I have built the 80 meter Phaser II which is a QRP FT8 Transceiver and as
the QRP-Labs Kits was fun to build. I also have the 20 meter Phaser II
version coming and another QCX Mini and QCX+ kit to build. The kits have
kept me off the streets during this Pandemic.
Ed.. AB4IQ
-Original Messag
K2/100 #5689
KDSP2 DSP Filter & Real Time Clock
KSB2 SSB Board
KIO2 RS232 Interface &Aux I/O W/Cable
KNB2 Noise Blanker
K160RX 160 Module w/receive Ant SW
Fixed Audio out
Clifton Labs 21 Buffer Amp
K2/100 #7857 and K2/100 #786
37 matches
Mail list logo