I am brand new K3 owner, unless I have missed something in all my research,
cannot find a program to manage memory via the PC. I surely hope I am wrong,
currently using a TS-480, the Kenwood utility is simple and does a great job
of running the radio via the PC including uploading downloading
Greg,
We'll be adding this function to our K3 Utility program at some
point. We'd be happy to get your input on it.
73,
Wayne
N6KR
On Dec 9, 2009, at 5:24 PM, w4grj wrote:
I am brand new K3 owner, unless I have missed something in all my
research,
cannot find a program to manage
?
http://home.roadrunner.com/~n2bc/SW.htm
Jan
w4grj wrote:
Suggest you look at the Kenwood control program
RCP-570 for the TS-480. In
addition to memory management, it makes it very easy
to control the radio
in addition to filter management and IF shift, DSP
control, etc
: N4PY2 [mailto:n4...@earthlink.net]
Sent: Thursday, December 10, 2009 6:18 PM
To: W4GRJ
Subject: Re: Elecraft K3 support
Jack,
The K3 does not support memory commands through the serial port. That's why
no program has this support for the K3.
73,
Carl Moreschi N4PY
121 Little Bell Drive
Hays
years,
not exactly new technology.
Tnx,
Jack
W4GRJ
-Original Message-
From: Edward Dickinson, III [mailto:edd...@windstream.net]
Sent: Friday, December 11, 2009 12:29 AM
To: elecraft@mailman.qth.net; w4...@satterfield.org
Subject: Re: [Elecraft] [K3] K3 Memory Management
As an alternative
Wayne,
The main function needed is to be able to build a database on the computer
with all needed memories, mode, etc. then write (upload) to the K3. Also, be
able to read the K3 memories and store in the computer.
Hope this helps.
Jack
W4GRJ
From: wayne burdick [via Elecraft
For HF purposes, the only other parameter that would be nice is power
setting.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Fleming
Sent: Friday, December 11, 2009 10:49 AM
To: elecraft@mailman.qth.net
Subject:
Agree with having a Label field with each memory location
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lance Collister
Sent: Friday, December 11, 2009 11:45 AM
To: df...@yahoo.com
Cc: elecraft@mailman.qth.net
Subject: Re:
NF4L
w4grj wrote:
Wayne,
The main function needed is to be able to build a database on the computer
with all needed memories, mode, etc. then write (upload) to the K3. Also,
be
able to read the K3 memories and store in the computer.
Hope this helps.
Jack
W4GRJ
From: wayne
I can find several posts on remote control of the K3 via the internet but it
is not clear to me the hardware/software needed. What would be the easiest
way to set up a basic remote system using the internet with a computer at
both ends?
--
View this message in context:
Dave,
Thanks a lot, big help.
Jack
W4GRJ
From: Dave G4AON [via Elecraft]
[mailto:ml-node+4159717-535493...@n2.nabble.com]
Sent: Sunday, December 13, 2009 9:23 AM
To: w4grj
Subject: Re: Simple Remote Control
You can read about how I have run my Perseus as a remote receiver using
Wes,
I am a brand new (3 days) K3 owner. My RF Gain control was acting exactly
like yours. I contacted Dale at Elecraft and he walked me thru a procedure
which completely fixed the problem. Suggest you give him a call.
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
For what it's worth, as a new K3 ownerI have learned a lot from this
discussion.
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Larry - K2GN
Sent: Friday, December 18, 2009 12:36 PM
To: Elecraft - K3
Subject
I am hooking up my new K3 to a ALS600 and would appreciate comments from
anyone with this combo concerning connecting without ALC control and any
relay delay settings in the K3
Jack W4GRJ
--
View this message in context:
http://n2.nabble.com/K3-to-ALS600-Amplifier-tp4199219p4199219.html
Sent
Is there any way to have the K3 remember different power settings for ANT 1
ANT 2 ?
Thanks,
Jack
W4GRJ
--
View this message in context:
http://n2.nabble.com/ANT-1-ANT-2-different-power-settings-tp4199667p4199667.html
Sent from the Elecraft mailing list archive at Nabble.com
I can get the K3 to xmit digital when the K3 is in data mode but I need to be
able to stay in USB and xmit MT63 digital. However, there is no output when
I am in USB mode. Any suggestionsThanks.
Jack
W4GRJ
--
View this message in context:
http://n2.nabble.com/Digital-xmit-in-USB-mode
, 2009 9:59 PM
To: W4GRJ
Subject: Re: [Elecraft] Digital xmit in USB mode
Jack,
Is your data mode set to DATA A? If so, there should be no difference
between LSB and USB. Tell us more about your setup and what you are
trying to accomplish.
73,
Don W3FPR
W4GRJ wrote:
I can get the K3
Elecraft]
[mailto:ml-node+4204417-69636...@n2.nabble.com]
Sent: Tuesday, December 22, 2009 11:31 AM
To: W4GRJ
Subject: Re: K3 to ALS600 Amplifier
This is the exact combination I use. I also have the
MFJ-998 High Power autotuner for a rather simple push
button station, albeit with less
list.
Thanks for a great Radio!
Jack
W4GRJ
wayne burdick wrote:
Hi all,
As you probably know, we keep a list of firmware features and
improvements to be added as time permits. Many of the most-requested
changes were made over the past several months, keeping pace with the
demands
can confirm same issue or is it unique to my rig? I
have a call into Elecraft, but thought I would try here in the meantime.
Tnx,
Jack
W4GRJ / AFA4DG
--
View this message in context:
http://n2.nabble.com/MARS-operation-problem-tp4210053p4210053.html
Sent from the Elecraft mailing list archive
W4GRJ wrote:
I have done the open the transmit frequency software update. The radio
will work on all freqs outside the Ham bands EXCEPT between 7.55Mhz and
8.99Mhz. Tried to check in to the SHARES net for the first time with my
new K3 on freq aprox 7.6Mhz and got the BND END message.
Any other
Correction to my poor grammer, should have said .Waiting to hear back
from Elecraft to see if they can move the lower limit freq up a bit to xmit
in the 7.6Mhz area
W4GRJ wrote:
Yes you are correct, just got off the phone with Elecraft ...it is due to
the IF at approx 8.2Mhz
Trying to build macros for the first time. I think I have the K3 utility
figured out but having trouble making a macro to do the following
1. switch to ant 1
2 tune (use the config menu preset at 15 watts) would like to tune for 2
secs then turn off
3 set the power output to 50 watts
My macro
The voulume on the headphones left is about 50% of the level on the right
side. I have tried several different headphones to eliminate them as the
problem. Is there any way to balance out the level? I am using the rear
phone jack.
--
View this message in context:
changing the volume of the left side only.
From: Don Wilhelm-4 [via Elecraft]
[mailto:ml-node+4220574-863075...@n2.nabble.com]
Sent: Sunday, December 27, 2009 9:12 AM
To: W4GRJ
Subject: Re: [Elecraft] Headphone balance
You can set CONFIG: SUB AF to BALANCE and the SUB AF knob will balance
Sounds like I have a problem. Will contact Elecraft next week, radio was
just received last week.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken K3IU
Sent: Sunday, December 27, 2009 11:19 AM
To: Vic K2VCO
Cc:
Just change CONFIG Spkrs to 2 .. No change, the left volume still approx 50%
of the right
From: Ken Wagner K3IU [mailto:kenk...@cox.net]
Sent: Sunday, December 27, 2009 11:43 AM
To: W4GRJ
Cc: 'Vic K2VCO'; elecraft@mailman.qth.net; d...@w3fpr.com
Subject: Re: [Elecraft] Headphone balance
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Headphone balance
W4GRJ wrote:
Just change CONFIG Spkrs to 2 .. No change, the left volume still approx
50%
of the right
Swap the 'phones on your head. If still 50% down on the left the problem
is with your hearing, not the radio.
Gus
Licensed in 1958 (I really was a youngster then), I have had the pleasure of
owning a lot of different radios over the years, the last 3 were FT-1000D,
FT1000Mp3 MKV and a TS-480 loved all of them. However, in my humble
opinion, none compare to the K3. My only criticism, which Wayne has
I use an external soundcard/interface Navigator. My main use is passing
traffic on MARS via MT-63 and MFSK-16. I just leave the radio in USB and set
the mode freq via HRD DM-780. Everything works great, my question is
there any advantage to switching the radio to Data Mode?
Jack
W4GRJ
Thanks, the replies are a big help.
Don Wilhelm-4 wrote:
Jack,
The advantage to using DATA A mode is that the compression is set to
zero and the Equalization is turned off. If you are also using SSB and
have compression set for SSB and/or are using equalization for normal
(speech)
,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
. This avoids the need to use counterpoise wires. Makes for a very
easy, fast antenna to set up. Also, we have very successfully used a single
V1 on a 42' sailboat mounted on the cabin.
Jack
W4GRJ / AFA4DG
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Depends on the Amplifier, I have a SPE Expert 1K-FA.10watts drive = 500
watts out
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle Johnson
Sent: Tuesday, August 10, 2010 1:33 PM
To: elecraft
The Expert 1K-FA is FCC Certified.maybe my meter is not accurate
In any event, I am sorry I ever commented on this reflector with such
responses.
Jack
W4GRJ
-Original Message-
From: Brett Howard [mailto:br...@livecomputers.com]
Sent: Tuesday, August 10, 2010 8:48 PM
To: W4GRJ
Cc
Sante,
Please post a picture.
Have fun!!
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Sante - IK0HBN
Sent: Sunday, August 15, 2010 6:47 AM
To: elecraft@mailman.qth.net; cw...@yahoogroups.com
Subject
I have been using the Navigator for about 1.5 years, first about a year with
a TS-480now about 6 months with the K3.
Works flawlesslyexcellent technical support when needed.highly
recommended.
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
check out the SPE Expert 1k-FA, it will do everything you asked for and
more.
http://www.radio-ham.eu/Expert1K-FA.htm
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of dw
Sent: Thursday, September 02, 2010 12:18
there are folks here that can help you.
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dale Wiese
Sent: Monday, October 04, 2010 2:31 PM
To: Elecraft Email
Subject: Re: [Elecraft] Volume Level with NR
Wayne,
I
mode.
Very compact (W 11.02, H 5.51, D 12.60) see all the specs
http://www.steppir.com/SteppirSPE.html
However, the 1K-FA is not suitable for outdoor application.
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
.
Thanks,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
expectation for a simple, quick to deploy
antenna. We used it on HF Freqs from 4 to 14.300Mhz, 2 Meters and on the
GMRS frequencies.
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jay Sissom
Sent: Thursday, March 11, 2010
corrected website for the V1 http://www.chameleonantenna.com/
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W4GRJ
Sent: Thursday, March 11, 2010 11:03 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft
I am running a Expert 1K-FA 1KW amplifier on 120 VAC with no problems.
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lew Phelps K6LMP
Sent: Tuesday, April 20, 2010 1:46 PM
To: Elecraft
Subject: Re: [Elecraft
I agree on the protective response time of the Expert being very fast, I
have accidently hit it with 100w a couple times . it alarms and shuts
down with no apparent harm done.the absolutely best amplifier I have
ever used.
Jack
W4GRJ
-Original Message-
From: elecraft-boun
When I turn SUB Rcv'r on I get a USE AUX message, can't find in the
manual...can someone explain.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I am confused how this thread has anything to do with Elecraft ??
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Tubbs
Sent: Thursday, May 10, 2012 2:28 AM
To: elecraft@mailman.qth.net
Subject: Re
Can the KPA500 KAT500 be operated remotely via software? I need to separate
the K3 from them about 3 to 4 feet and would like to operate the amp and tuner
via pc software.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http
Is it possible to view your xmit signal on the P3?
Tnx, Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Best long-winded reply received in a long time.
Tnx,
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bruce Beford
Sent: Monday, May 28, 2012 12:43 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 P3
I have a extra, new never used CM-500 for sale $40 plus actual mailing cost.
Offline replies please.
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I installed both AM FM filters and set them up using the K3 utility
program, with AM using both filters. When I adjust the filter width on the
K3 the max I can get on AM is 5 kHz. On FM it shows N/A. What am I missing ?
Jack
W4GRJ
I installed both AM FM filters and set them up using the K3 utility program,
with AM using both filters. When I adjust the filter width on the K3 the max I
can get on AM is 5 kHz. On FM it shows N/A. What am I missing ?
Jack
W4GRJ
I installed both AM FM filters and set them up using the K3 utility program,
with AM using both filters. When I adjust the filter width on the K3 the max I
can get on AM is 5 kHz. On FM it shows N/A. What am I missing ?
Jack
W4GRJ
going on the DX
expedition .
Jack
W4GRJ
On Dec 27, 2012, at 17:01, Robert Fanfant rfanf...@hotmail.com wrote:
All,While on a mini dx-pedition, most of the original exterior screws in my
K3 developed rust after operating near salt water for 10 days. I have ordered
the stainless steel screws
No debate here however, It is all a matter of degree of exposure... Bottom
line, corrosion x will not hurt a thing.
Jack
W4GRJ
On Dec 27, 2012, at 18:17, Ken G Kopp kengk...@gmail.com wrote:
Eric beat me to posting on this subject.
FWIW, with five years as a R/O / ET on NOAA ocean-going
I gave this information for edification purposes...not a dabble.
THIS THREAD IS CLOSED.
Jack
W4GRJ
On Dec 27, 2012, at 19:11, tnny...@yahoo.com wrote:
Bottom line, corrosion x will not hurt a thing.
SIGH
Not hurt a thing! Except your WARRANTY!
(((73))) Milverton.
From
My IPad inserted dabble in place of debateboth words work to end this
thread.
On Dec 27, 2012, at 19:37, W4GRJ w4...@satterfield.org wrote:
I gave this information for edification purposes...not a dabble.
THIS THREAD IS CLOSED.
Jack
W4GRJ
On Dec 27, 2012, at 19:11, tnny
I have the GAP Hear It on my K3 and in the car. I have the Clear Speech on my
boat with a Icom M802. I find they reduce substantially the background noise.
It is particularly helpful in the car and on the boat but I also love it in my
shack.
Jack
W4GRJ
On Aug 31, 2013, at 13:13, kb9
Will the KPA500 work on HF freqs outside the ham bands ie., MARS freqs?
Thanks,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Will the KPA500 work on all freqs outside the HF Ham bands.
I want to make sure it will function on MARS freqs.
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
I recently ordered the KPA500 KAT500. Looking at the connection diagram
between the K3 KAT500 there is a connection on the ACC of the K3. My
Navigator soundcard is now connected to the ACC on the K3. What is the solution
to use both the KAT500 the Navigator?
Tnx,
Jack
Where can I download the driver for the KAT500 USB cable?
Thanks,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Recently connect a new KPA500 KAT500 to my K3.
When running the utility programs, the KPA500 utility shuts down when I
select firmware tab.
The KAT500 program works fine.
Any ideas why the KPA Utility quits when the firmware tab is selected?
Tnx,
Jack
W4GRJ
I agree with Tom. I am AF MARS, we operate on lot's of Federal frequencies,
all outside the Ham bands. Just need to pay attention to your operating which
we all should be doing.
Jack
W4GRJ / AFA4DG
On Nov 22, 2013, at 21:55, Tom n...@n5ge.com wrote:
Nate,
I am a member of Navy Marine
I live in Florida and as a fishing guide, the 4 group 27 AGM batteries on my
boat have performed perfectly now for over 4 years of almost daily use. I have
almost every piece of marine electronics and radios running on the boat.
Jack
W4GRJ
On Nov 30, 2013, at 3:17, David Cutter d.cut
David,
I believe the key to AGM longevity is to keep them on a proper charger 24/7.
This is what I have done with excellent results.
Jack
W4GRJ
On Nov 30, 2013, at 9:36, David Cutter d.cut...@ntlworld.com wrote:
Hello Jack
I can see your experience is good. I haven't so far uncovered what
of the various applications
using batteries as E/I source and the associated mathematics.
Jack
W4GRJ
On Nov 30, 2013, at 12:49, AG0N-3055 mcduf...@ag0n.net wrote:
On Sat, 30 Nov 2013 04:12:54 -0500, W4GRJ wrote:
I live in Florida and as a fishing guide, the 4 group 27 AGM batteries on my
boat have
I changed computers, now trying to get the Navigator sound card interface to
work with the K3.
I don't remember settings for PTT DTR and RTS settings, are they checked?
Now I have to find the correct comm. port.
Thanks,
Jack
W4GRJ
To further the discussion I use Corrosion X on everything electrical. I have
two charter boats and it works. No debate intended and I am not suggesting
Corrosion X is better than Deoxit, just putting the information out there.
Capt. Jack
W4GRJ
On Dec 12, 2011, at 11:09, W0MU Mike Fatchett w
Matt,
Just leave the K3 in USB, do not change to data mode. RMS Express will set to
the correct freq. You will not have to make any adjustments.
Jack
W4GRJ / AFA4DG
On Jan 1, 2012, at 11:30, Matt Zilmer mzil...@verizon.net wrote:
In all this time with K3 #24, I've never been stymied by any
I use RMS Express Winmor, DSM780 FlDigi MT63, Airmail Pactor and MIL110A,
they all work perfect with the rig left in USB.
Jack
W4GRJ / AFA4DG
On Jan 2, 2012, at 3:43, Richard Ferch ve3...@storm.ca wrote:
W4GRJ wrote:
Just leave the K3 in USB, do not change to data mode. RMS Express
Rich,
I understand the original question, I was just trying to simplify things by
explaining there is no need to switch modes.
This is very convenient on the MARS nets which are USB and we quickly switch
to MT63 for traffic.
Jack
W4GRJ / AFA4DG
-Original Message-
From: elecraft-boun
I use a G5RV mainly on MARS freqs. From 3.2 MHz to 30 MHz using the k3 and
internal ATU with great success. Never found a frequency it would not easily
tune.
Jack
W4GRJ / AFA4DG
On Mar 9, 2012, at 1:33, Dick Roth raro...@gmail.com wrote:
Hi there--
Am considering putting up a g5rv
Another example, MARS operators are not governed by the FCC.
Jack
W4GRJ / AFA4DG
On Mar 15, 2012, at 18:32, Oliver Dröse dro...@necg.de wrote:
Great Alan, nice idea with the manual! ;-))
Anyway, a very big part of this world's ham population is not bound to FCC
rules. So no need to make
Gil,
What kind of noise problem are you referring to? I use a SL USB with my K3 with
no issue.
Jack
W4GRJ
On Feb 10, 2013, at 11:43, Gil G. g...@keskydee.com wrote:
Hello,
I was going to buy a Signalink USB for my KX3, but after reading about the
noise problems I am not so sure. I wish
Gil,
Interesting articles on the SL interface. All I know is, I use one all the time
mainly on MARS MT-63 and Olivia with no issues. I also use a US Navigator which
I think is the gold standard for digital interfaces
http://www.navigator-interface.com/
Jack
W4GRJ
On Feb 10, 2013, at 12:06
I use a 102 ft G5RV on all freqs from 3 MHz to 29 MHz, of course with a tuner.
Besides the amateur freqs I am on MARS and the marine freqs.
Jack
W4GRJ
On Feb 13, 2013, at 17:14, Paul and Sue Huff ph...@mi.rr.com wrote:
Here in the dead of winter I am thinking about spring antenna projects
suggestions to fix short of sending the radio back.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Take a look at the Navigator now from Timewave
http://www.timewave.com/support/Navigator/index.html
I think it is one of the best available, my K3 loves it.
Jack
W4GRJ
On Mar 13, 2014, at 3:49 AM, Paul Ormandy ZL4PW zl...@orcon.net.nz wrote:
Hi all,
Have purchased a new Win 7 laptop and have
send the connection diagram to you.
Tnxs,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I have the AA-600, easy to use with lots of features.
The RigExpert models you listed are basically the same just lower frequency
range.
You will love it.
Jack
W4GRJ
On Mar 30, 2014, at 10:37 PM, Mark Tellez aar...@gmail.com wrote:
Hello,
I am considering purchasing an antenna analyzer
Are there any instructions anywhere explaining the different settings in the
software?
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
What are opinions of leaving my K3 and KPA500 on 24/7 or should they
be powered on and off for daily use?
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
My question is technical not financial I just wanted opinions of which is
best for the equipment on 24/7 or not Maybe the answer is it doesn't matter.
Jack
W4GRJ
On Nov 17, 2014, at 5:40 PM, norrislawfirm2 norrislawfi...@gmail.com wrote:
Why would you want to leave it on? It's just
Something changed in my K3 Config, use to have the internal spkr off for use
with external noise cancelling speaker. This has to be the dumbest question
ever asked, How to turn off internal spkr?
Jack
W4GRJ
__
Elecraft mailing list
as good as my
102' long wire and is amazingly quiet. I got the antenna mount for the tripod
on EBay. It works great, takes 5 minutes to set up.
Good luck
Jack
W4GRJ
On Mar 9, 2015, at 12:48 PM, Mark Tellez aar...@gmail.com wrote:
Hello all,
I am a relatively new KX3 user. So far I love the radio
Is there a Auto Power Off setting in the K3?
I cannot find this in the manual so it's probably not available but thought
I would ask the brain trust.
Thanks,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
smoking environment. Prefer to sell K3 P3 as
package, will include associated interconnect cables.
Please reply offline.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
smoking environment. Prefer to sell K3 P3 as
package, will include associated interconnect cables.
Please reply offline.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
over $4700
Sell for $3785 includes mailing / insurance
All perfect condition, non smoking environment.
Please reply offline.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
For Sale K3 serial 3746 Factory Assembled
K3/100
KAT3
KRX3
KXF3A
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter
$3400 includes shipping and insurance
P3 serial 1020 Factory assembled
$635
All perfect condition, non smoking
P3 is sold
Jack
W4GRJ
On Jun 7, 2015, at 8:56 PM, w4grj w4...@satterfield.org wrote:
For Sale K3 serial 3746 (Not K3S) Factory Assembled
K3/100
KAT3
KRX3
KXF3A
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter
$3650 includes
My KPA500 has recently started to switch from operate to standby while using
on voice LSB on 40 meters
KAT500 tunes to 1.38 SWR, the bypass SWR is 3.1
This now happening on several occasions...any suggestions appreciated.
Jack
W4GRJ
cables
Original cost over $4700
Sell for $3700 OBO, includes mailing / insurance All perfect condition, non
smoking environment.
Please reply offline.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
SOLD. Tnx.
Jack
W4GRJ
-Original Message-
From: w4grj [mailto:w4...@satterfield.org]
Sent: Saturday, August 01, 2015 7:41 AM
To: 'elecraft@mailman.qth.net'
Subject: RE: FS K3 P3
Last Time for this
For Sale K3 S# 3746 and P3 S# 1020 Both Factory Assembled
K3/100
KAT3 ATU
KRX3 2nd
Original cost over $4700
Sell for $3200 includes mailing / insurance All perfect condition, non
smoking environment.
Please reply offline.
Tnx,
Jack
W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
It has been sent to Elecraft.will advise results when I get it back
SN 1767
From: mcduffie [via Elecraft]
[mailto:ml-node+s365791n7609384...@n2.nabble.com]
Sent: Wednesday, October 21, 2015 10:05 AM
To: W4GRJ
Subject: Re: KPA500 troubles
On Tue, 20 Oct 2015 08:58:17 -0700 (MST), ok1rp
Like I said, never ever operated on 60M, I mean never without the amp.
When discussed with Craig at Elecraft he could not explain the failure, just
referred to a component failure.
Jack
W4GRJ
On Nov 11, 2015, at 3:59 PM, David Pratt [via Elecraft]
<ml-node+s365791n761024...@n2.nabble.
I need to correct the information on the repair cost
It was $615 with shipping not $650 as I previously reported.
Jack W4GRJ
On Thursday, November 12, 2015, W4GRJ <w4...@satterfield.org> wrote:
Since I have never operated on 60m ever... You figure it out
Jack
W4GRJ
On Nov 11
1 - 100 of 135 matches
Mail list logo