Tony,
That may not be a K-POD problem since the MEM 3 is being shown in the
VFO B area.
Try to see if you can duplicate the same behavior with your M1 button
(with the K-POD connected).
If you suspect an RF problem, try it into a dummy load and see if the
behavior stops. If it does, some work on your antenna system to reduce
the RF in the Shack.
73,
Don W3FPR
On 9/21/2016 8:07 AM, Tony G6GLP wrote:
Hi All,
I have had the K-Pod some time now and have been more than happy with
it. I modded the K3 with the 6.8 ohm R so that I only need to use the
rj45 cable supplied to connect the K3 and K-Pod together.
I have, being lazy, programmed F3 to simulate M1 which works fine most
of the time.
When it works I press the F3 and MEM 3 appears on the K3 display and
the contents of M1 are send (my call in CW). Occasionally only the MEM
3 appears and the M1 contents are not sent. I know its easy enough to
just press F3 again and it will work but thats not the point.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
