Me too. The issues (the devil) are in the details
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Richard Donner
Sent: Monday, March 12, 2018 8:43 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 Sub RX stopped working on 20/17 meters
Hi
Reload your saved firmware? I have run into issue solved by reloading
firmware. It is like your PC doesn't work so well when a restart dumps all the
memory and reloads the OS.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Chris Hallinan
Sent:
Chris,
Which filters are enabled for what modes? You can check with K3 Utility.
It would simplify things a bit if you moved the SUB RX filter by one
slot (leaving FL1 empty).
Then change the filter configuration to match using either K3 Utility or
by hand in the menu.
The thing that is reall
Thanks Don,
According to the K3 Utility, all four filters are enabled for Sub RX for
CW, USB and LSB modes.
However, I still can only receive on FL2/3. When FL1 or 4 are selected,
the Sub RX S-Meter goes to zero and there is no receive on any mode.
By now I am quite familiar with the BSET button
Hmmm.
Just made a new discovery.
I can get the Sub RX to work on FL2 and FL3, but not FL1 nor FL4.
Here is my filter configuration:
FILTER Main RX SUB RX
FL1 13KHz2.7KHz
FL2 2.7 1.8
FL3 1.8 500Hz
FL4 500Hz250
FL5 250Hz
First of, shouldn't these
Well, I have a 20-meter vertical connected directly to the AUX RF input,
and a receiving loop connected to RX IN. So unless there is a setting
somewhere that somehow disconnects the antennas on 20 and 17, it's simply
not working.
Noone else has replied. I have placed a call to Elecraft support o
6 matches
Mail list logo