So, I finally got the decks cleared a bit, and want to work
on the 64-bit issues
in the Pico ppmc driver. I got the amd64-r13 installed and
running, after some network issues.
I immediately saw there were problems handling conversion to
scaled position.
I expected problems with the sign-exten
Hi Phill,
thanks for the hint!
works, but I forgot, that tk has different screen orientation, so position is
odd. But position overriding from window-manager works, so now it works as
wanted.
cheers Reinhard
___
Emc-developers mailing list
Emc-de
> When axis comes up, it has the size given from the window-manager. Then after
> a short delay it shrinks to the tiny size.
> May be, its possible to set the size of the main window earlier, so that it
> accepts the size given from window-manager?
you can set the size of Axis with the followin
Hi,
I have a desktop with increased font size. When I start linuxcnc (configuration
selector), it comes up with the buttons outside the visible area.
To me it looks like the minimal size of the listbox is bigger than the entire
window, so I have to manually grow the window to see the buttons and
On Friday 24 April 2020 11:42:18 andy pugh wrote:
> On Fri, 24 Apr 2020 at 16:11, Gene Heskett
wrote:
> > While you are seeing about that, I ran down the test thats failing,
> > and found the error is actually "can't load simpockets.tbl"
>
> It isn't that, if you look at the test output.
>
> Try
On Friday 24 April 2020 11:42:18 andy pugh wrote:
> On Fri, 24 Apr 2020 at 16:11, Gene Heskett
wrote:
> > While you are seeing about that, I ran down the test thats failing,
> > and found the error is actually "can't load simpockets.tbl"
>
> It isn't that, if you look at the test output.
>
> Try
On Fri, 24 Apr 2020 at 16:11, Gene Heskett wrote:
>
> While you are seeing about that, I ran down the test thats failing, and
> found the error is actually "can't load simpockets.tbl"
It isn't that, if you look at the test output.
Try going in to the test folder and running "runtests -v ." and i
While you are seeing about that, I ran down the test thats failing, and
found the error is actually "can't load simpockets.tbl" which does exist
at 4 other locations in the tree and twice in my home/linuxcnc/sims dir.
This is in linuxcnc-dev/tests/tool-info/random-with-startup-tool$/test.sh
whi
On Fri, 24 Apr 2020 at 12:20, andy pugh wrote:
> I tried to install Buster on my mill controller to have another test system.
> Unfortunately, it doesn't seem to work.
Nor does stretch (4.9.0.7 kernel)
Interesting.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designe
On Fri, 24 Apr 2020 at 14:52, Reinhard wrote:
> I realized, that the BIOS does not support USB, although it claimes to do so.
> I wasn't able to install from usb or use usb-keyboards ...
I can use USB keyboards in grub and in the BIOS screen, so I think it
has to support USB.
(It has no PS/2 por
Hi Andy,
On Freitag, 24. April 2020, 13:20:53 CEST andy pugh wrote:
> I tried to install Buster on my mill controller to have another test system.
> Unfortunately, it doesn't seem to work.
> The board is fairly old, ...
I have similar board (guess its from Asus) with Atom-CPU too, where I have
s
On Sun, 19 Apr 2020 at 17:58, René Hopf via Emc-developers
wrote:
> I added the EOL date of the official distros to the wiki:
> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?MinimumSoftwareVersions
> Notice that only stretch and buster are not near end of life.
I tried to install Buster on my mill co
12 matches
Mail list logo
