On 4/5/24 18:02, Curtis Dutton wrote:
Gene can you send some links to some of these drives/motors. I'd like to
read more about them. Sounds like interesting tech. Maybe we can steal some
ideas here. Plus if we get a control board set up and running there is no
reason we couldn't adapt it to run o
Gene can you send some links to some of these drives/motors. I'd like to
read more about them. Sounds like interesting tech. Maybe we can steal some
ideas here. Plus if we get a control board set up and running there is no
reason we couldn't adapt it to run other types of power modules.
On Fri, A
On 4/5/24 08:25, Curtis Dutton wrote:
yessir thank you. I studied it a fair bit a few years ago. It's part of the
inspiration for this for sure.
I'd like this new board to run out of thr box linuxcnc hal and maybe we can
port and adopt lots of the STMBL code into this project.
My goal is to hav
On 4/5/24 06:57, Curtis Dutton wrote:
Hello all,
I'm starting a new project to build a motor drive based upon igbt modules.
Hoping to build something that has a single type of controller that will
plug and play with various capacity igbt modules for various size motors.
This thing shall be able
That would make sense. Just as a quick search I see 4, 8 and possibly even
16Khz pwm frequencies. I'll report on what mac thread frequency this pine
star board can sustain once I get there.
We can find a board with an fpga onboard if its not workable on its own.
On Fri, Apr 5, 2024, 9:30 AM Thadd
As far as I know, current feedback loops update on each PWM cycle.
> On Apr 5, 2024, at 7:27 AM, Curtis Dutton wrote:
>
> yessir thank you. I studied it a fair bit a few years ago. It's part of the
> inspiration for this for sure.
>
> I'd like this new board to run out of thr box linuxcnc hal
yessir thank you. I studied it a fair bit a few years ago. It's part of the
inspiration for this for sure.
I'd like this new board to run out of thr box linuxcnc hal and maybe we can
port and adopt lots of the STMBL code into this project.
My goal is to have this "controller" be a bone stock hal
On Fri, 5 Apr 2024 at 11:59, Curtis Dutton wrote:
> I'm starting a new project to build a motor drive based upon igbt modules.
> Hoping to build something that has a single type of controller that will
> plug and play with various capacity igbt modules for various size motors.
Are you aware of t
fre 2024-04-05 klockan 06:55 -0400 skrev Curtis Dutton:
> Hello all,
>
> I'm starting a new project to build a motor drive based upon igbt modules.
> Hoping to build something that has a single type of controller that will
> plug and play with various capacity igbt modules for various size motors.
