Sam,
I lowered the base thread to 25uS and the encoder error: rtapi_app:
caught signal 8 - dumping core , is gone!
-Bari
Brand new setup using stepconf. if I spin the spindle encoder
quickly by hand I get: rtapi_app: caught signal 8 - dumping core
Even if the machine is still in e-sto
one interesting thing... If you crash out of 2.9 - the installed 2.8 won't
start until you re-launch and exit 2.9.. (no - linuxcnc is already running
- do you want to exit?)
I will get the error that comes up when you try to launch 2.8...
sam
On Tue, Sep 6, 2022 at 4:43 PM andy pugh wrote:
>
On Tue, 6 Sept 2022 at 22:34, Bari wrote:
> So it looks like an RTAI bug with 2.8 at least about the encoders
> signals to spindle RPM GUI in Axis.
>
> Will go back and trace why preempt_rt has issues with LPT encoders in
> LCNC 2.9.
If there is a difference between the realtime versions then I
On 7/30/22 20:57, Jon Elson wrote:
On 7/16/22 22:05, Jon Elson wrote:
Well, the saga continues! I thought I had this all working, but then
rebooted today, and could not get the MCS9900 card to work properly.
I could run my diag and see the boards respond, but then when I ran
some tests, th
On 7/16/22 22:05, Jon Elson wrote:
Well, the saga continues! I thought I had this all working,
but then rebooted today, and could not get the MCS9900 card
to work properly. I could run my diag and see the boards
respond, but then when I ran some tests, the parport would
lock up, and lspci -
