Dear Members,
Could you please share your suggestions/comments to connect the
above-referenced LISN (
http://www.rohde-schwarz.com/en/product/env216-productstartpage_63493-9775.html)
to reference ground in a semi-anechoic chamber (mainly for radiated
emission measurement) where a 2mx2m vertical
Good question Amund.
Adding a diversion plane is fairly standard procedure when it comes to
high-end handheld calculators, and the like. It also is a good ESD solution for
troubleshooting or retrofit of a product. Theoretically, I believe that
replacing the separate diversion plane with an
In message c7cae48f-b856-46c3-9470-c2b7385c8...@emc-seminars.com,
dated Thu, 28 Mar 2013, Ken Wyatt k...@emc-seminars.com writes:
Therefore, (in theory) if the ESD current is diverted to the lower
plane, it should not affect the circuitry on the PC board.
The ESD current is quite often large
Hello
The IEEE EMC Society will be hosting its International Symposium right here in
Denver Colorado.
We are looking for participants in the Experiments and Workshops piece of this
Symposium and
as co-chair of that piece, I am inviting authors (especially in Colorado) to
participate. We are
On Thu, 28 Mar 2013 08:30:43 -0400,
Grace Lin graceli...@gmail.com wrote:
Could you please share your suggestions/comments to connect the
above-referenced LISN (
http://www.rohde-schwarz.com/en/product/env216-productstartpage_63493-9775.html)
to reference ground in a semi-anechoic chamber
All,
Looking for subject info in CFR Title 47, various parts. See the info for
AM/FM broadcasting, but not for handheld radios and also for transmitters
operating in unlicensed bands such as RFID 900 MHz, and wi-fi. Any hints on
where to look?
Thank you,
Ken Javor
Phone: (256) 650-5261
-
6 matches
Mail list logo