Re: [PSES] Device with Bluetooth

Bluetooth power levels The transmitter powers for Bluetooth are quite low, although there are three different classes of output dependent upon the anticipated use and the range required. Power Class 1 is designed for long range communications up to about 100m devices, and this has a maximum

Re: [PSES] EN62311 - Human Exposure to Electromagnetic Fields

testing at 50 mT. -Original Message- From: McCallum, Andy [mailto:andy.mccal...@mottmac.com] Sent: 06 July 2018 10:27 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] EN62311 - Human Exposure to Electromagnetic Fields Hi Bernd It’s a mess but at this time no one seems to want to address

Re: [PSES] EN62311 - Human Exposure to Electromagnetic Fields

at least 15 s of exposure to the magnetic field, the DUT shall be slowly removed from the field. http://www.rbht.nhs.uk/about/news-events/archive/pacemaker/ The easiest was around it is to actually contact the manufacturer and try and get some form of reassurance from them. Regards Andy

Re: [PSES] EN62311 - Human Exposure to Electromagnetic Fields

rid of that limit after Brexit. Also note a number of pacemakers are now available which are safe to wear in MRI scanners operating at 7Teslas. Andy From: Dürrer Bernd [mailto:bernd.duer...@wilo.com] Sent: 06 July 2018 08:24 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] AW: [PSES] EN62311

Re: [PSES] EN62311 - Human Exposure to Electromagnetic Fields

Be surprised if any LVD could cause EMF large enough to pose a danger to Human Health. Intentional transmitters maybe, a rare beast to create those levels unintentionally at less than 1000V. Andy From: John Woodgate [mailto:j...@woodjohn.uk] Sent: 05 July 2018 10:28 To: EMC-PSTC

Re: [PSES] Automotive EMC question

See Keith Armstrongs many papers on this for example: https://www.emcstandards.co.uk/files/design_techniques_for_emc_1999_part_2_cables_and_connectors.pdf Andy From: Ken Javor [mailto:ken.ja...@emccompliance.com] Sent: 13 June 2018 15:01 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES

Re: [PSES] FW: Industrial Printer

The manufacturer needs to consider which environment they are targeting. BS EN 50121-4 for the railways has some particularly harsh immunity requirements which exceed the standard heavy industrial immunity requirement in EN 61000. From: John Woodgate [mailto:j...@woodjohn.uk] Sent: 24 May 2018

[PSES] BS EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic fields

Anyone have any experience of this standard? Do any lighting systems get close to the ICNIRP limits? Any thoughts welcome Andy - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post

Re: [PSES] Correlation between Radiated Fields and Induced currents

. “https://www.itu.int/pub/T-HDB-EMC.1-1990-P3” Regards Andy From: John Mcauley [mailto:john.mcau...@cei.ie] Sent: 11 January 2018 13:23 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Correlation between Radiated Fields and Induced currents Hi All I am trying to correlate the conducted levels

Re: [PSES] Active Implantable Medical Devices

John TC 106 is for human exposure I was thinking of EMC issues - seems a gap here. Andy -Original Message- From: John Woodgate [mailto:jmw1...@btinternet.com] Sent: 03 April 2017 09:45 To: McCallum, Andy <andy.mccal...@mottmac.com>; EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: [PSES]

Re: [PSES] Active Implantable Medical Devices

fields of greater than 7T. Also wouldn't it be sensible to ensure that all devices met the ICNIRP exposure levels ? Regards Andy -Original Message- From: Dürrer Bernd [mailto:bernd.duer...@wilo.com] Sent: 03 April 2017 08:37 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] AW: [PSES

[PSES] another email test

More testing - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on

[PSES] email setting test

Email test - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on

[PSES] eMail Setting test

Testing - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the

[PSES] email setting test

Testing email setting - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and

[PSES] EU Declaration of Conformity

for the products placed on the market to be considered as compliant.” Andy McCallum BEng (Hons), MIET, CEng Senior EMC Engineer T +44 (0)1332 220878 ‌M 07720264505 ‌F +44 (0)1332 220835 andy.mccal...@mottmac.com<mailto:andy.mccal...@mottmac.com>

Re: [PSES] Incidental Radiators per FCC Part 15

Grace No a compliant report should not be issued. You will need to investigate the problem with the DC motor and resolve the issue. Regards Andy From: Grace Lin [mailto:graceli...@gmail.com] Sent: 22 November 2016 14:46 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Incidental Radiators per

Re: [PSES] Automated vehicles.

John I think the American secret service have enough work to cope with! From: John Allen [mailto:john_e_al...@blueyonder.co.uk] Sent: 08 November 2016 11:11 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Automated vehicles. Mike That’s an “interesting” concept: maybe one could also do the

Re: [PSES] Automated vehicles.

(responsibility) away from the driver could still be 10, 20 or a 100 years away. Andy From: Ted Eckert [mailto:07cf6ebeab9d-dmarc-requ...@ieee.org] Sent: 07 November 2016 23:35 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Automated vehicles. I don’t think anybody is arguing

Re: [PSES] SAFETTY FEATURES controlled by ....SOFTWARE

Most (well a lot) railway signalling is now software controlled. The first Solid State Interlocking (SSI) was introduced in the UK in the 1980's. Its widely used around the world. Andy -Original Message- From: Nick Williams [mailto:nick.willi...@conformance.co.uk] Sent: 05 August

[PSES] New EMC Directive 2014/30/EU

when? Regards Andy Andy McCallum BEng (Hons), MIET, CEng Senior EMC Engineer - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail

[PSES] Magnetic H Field Strength Density

Hi All ETSI 300 330 uses the term H Field Strength Density - which I have not come across before. It appears to mean the H field strength measured in a particular resolution bandwidth on the spectrum analyser. Can anyone confirm that please? Any help much appreciated. Regards Andy

Re: [PSES] CE-EMC on Submersible Product

John Is there anything stopping the device producing noise when it is out of the water? If not I would look to test it as for any normal device. Regards Andy -Original Message- From: John Allen [mailto:jral...@productsafetyinc.com] Sent: 18 May 2016 22:19 To: EMC-PSTC

Re: [PSES] SV: [PSES] EU's new approach directive transitions

easonable mitigation? No that's the best you will get move on the next risk. Hope that helps Andy From: Gary Swale [mailto:gary.sw...@ditchwitch.com] Sent: 14 April 2016 00:48 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] SV: [PSES] EU's new approach directive transitions >>I don't h

[PSES] FW: EMCTLA - White Paper - Modes of Operation for EMC Testing

discussion within the industry. Regards Andy Andy McCallum Senior EMC Engineer - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <em

Re: [PSES] FW: EMCTLA - White Paper - Modes of Operation for EMC Testing

John Have sent you copy of white paper in separate email. Maybe Michael can provide you with an answer on the standards issue. Regards Andy -Original Message- From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: 11 September 2015 10:13 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re

Re: [PSES] International EMF Scientist Appeal

). In general, the operation of these devices is not adversely affected by static magnetic fields below 0.5 mT. This level is a concern for DC rail systems where currents and thus magnetic fields can be high. Regards Andy -Original Message- From: John Woodgate [mailto:j

Re: [PSES] EN-61000-6-4

Charles/Joe Yes I was referring to homeplug. Thanks your advice I will follow EN 60950. Regards Andy From: Grasso, Charles [mailto:charles.gra...@echostar.com] Sent: 23 June 2014 20:19 To: McCallum, Andy; EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: [PSES] EN-61000-6-4 Andy - Are you referring

Re: [PSES] EN-61000-6-4

Thanks Chet and Joe So if you have Ethernet over your power cables do you test the mains as a telecommunication port or a mains port? I would think you would have to treat it as a mains port? Regards Andy From: Summers, Chet [mailto:chet.summ...@schneider-electric.com] Sent: 21 June 2014 01

[PSES] EN-61000-6-4

All Why are telecommunications port emissions so much higher than AC power ports? Regards Andy - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message

[PSES] Automotive Directive 2004/104/EC and EN 55012

All Can anyone explain the difference in the limits between the directive and EN 55012. Regards Andy - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list

Re: [PSES] Automotive Directive 2004/104/EC and EN 55012

Hi Tom But the difference is only 2dB - I don't see the point. Regards Andy -Original Message- From: T.Sato [mailto:vef00...@nifty.ne.jp] Sent: 11 June 2014 13:09 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Automotive Directive 2004/104/EC and EN 55012 On Wed, 11 Jun 2014 12

Re: [PSES] Automotive Directive 2004/104/EC and EN 55012

John Politics ? Oh dear (or words to that affect) So as 55012 is harmonised under the EMC directive you could in theory meet that directive but fail the automotive directive. Madness oh yes you explained its Politics. Best Regards Andy -Original Message- From: John Woodgate

[PSES] EMC Job - Reading UK

Andy https://www.linkedin.com/jobs2/cap/view/11651165?pathWildcard=11651165trk=job_capjshttp://www.linkedin.com/redirect?url=https%3A%2F%2Fwww%2Elinkedin%2Ecom%2Fjobs2%2Fcap%2Fview%2F11651165%3FpathWildcard%3D11651165%26trk%3Djob_capjsurlhash=9tHA_t=mbox_prop My client is a leading product testing

Re: [PSES] Curious Situation in Italian Customs

Brian I had some trouble importing equipment from USA a few years ago - for a relatively small fee it was sorted out by http://www.techintl.com/ (Charles Green I think his name was). They provided a UK address for the US manufacturer. Hope that helps. Andy From: Charlie Blackham [mailto:char

Re: [PSES] Audio Frequency Induction Loop

John It's a UK based Tram - single conductor wire. Traction current return via the running rails. Regards Andy -Original Message- From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: 30 January 2014 15:54 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Audio Frequency

Re: [PSES] Audio Frequency Induction Loop

Thanks John The rectifier is in fact 12 pole in this case giving harmonics at 600Hz. We will look to replace the loop system. Regards Andy -Original Message- From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: 31 January 2014 10:27 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re

Re: [PSES] Audio Frequency Induction Loop

John Sorry the quoted limits from the installer of the Afil system are from BS EN 60118-4:1998 : I will read the 2006 and see if there have been any changes. Regards Andy -Original Message- From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: 27 January 2014 17:33 To: EMC-PSTC

Re: [PSES] Audio Frequency Induction Loop

, measured with the time weighting S (as defined in IEC 61672), should not exceed – 40 dB anywhere in the operational area. I am conducting some tests on the tram tonight which should give me some more figures to use. Regards Andy -Original Message- From: John Woodgate [mailto:j

[PSES] Audio Frequency Induction Loop

. Regards Andy - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web

Re: [PSES] 60950-1 durability test solvent

Pete, Some people can make simple things very difficult, even when it is not necessary. I think many people will recognise these type of organisations. cheers andy Andy Mullan UK. -Original Message- From: Pete Perkins peperkin...@cs.com To: EMC-PSTC EMC-PSTC@LISTSERV.IEEE.ORG

Re: [PSES] Ecma TR-106 available

Kaz, The UK voted NO to the 2nd CDV, currently out for vote. cheers Andy Mullan. -Original Message- From: Kaz Gawrzyjal kazimier_gawrzy...@dell.com To: EMC-PSTC EMC-PSTC@LISTSERV.IEEE.ORG Sent: Tue, 26 Feb 2013 19:47 Subject: Re: [PSES] Ecma TR-106 available Hi Brian, From a cost

RE: EN55022:1998 and telecom ports

) for all our interfaces, ENET, T1, RS232 etc] Andy White, Staff EMC Engineer Ericsson Wireless Communications Inc. San Diego, CA 92121 Tel 858 332 6214 / 877 877 7799 ext 26214 Fax 858 332 7311 e-mail andy.wh...@ewu.ericsson.se

RE: NEBS compliance for 100baseT / 1000base T

- Intrabuilding surge does not apply.] Intra-building surge for ENET is possible, if using non-shielded cable. Andy Andy White, Staff EMC Engineer Ericsson Wireless Communications Inc. San Diego, CA 92121 Tel 858 332 6214 / 877 877 7799 ext 26214 Fax 858

RE: SI Unit for volume

I agree the gallons per minute rating for air compressors seems odd, but when one looks at adverts in the USA for compressors with storage tanks, the tanks themselves are sizes in gallons (30 Gal, 50 Gal. etc..). If the compressor flow is sized in gallons per minute, then the customer gets some

RE: EMC Emissions Safety Margins

/developments to the electronics, market areas product is to be sold etc. The greater the 'margin' at the initial product certification will generally help during production audits and future product enhancements. Andy White Senior EMC Engineer Ericsson Wireless Communications Inc. San Diego CA

RE: TUV NRTL

Richard- We have obtained the c-TUV-us mark for our electromechanical material testing product line. We have shipped over 550 systems without any difficulties regarding the mark. I have, however, had to answer several questions from our field sales people about what the mark means. Once they

RE: radar

Why would someone want to take a car out of UK with the steering wheel on the wrong side? I can think of at least one good reason to take a RHD car out of the UK - its called the Lotus Super 7. There, its out in the open now. I am a British car nut. :) Rerards, Andrew Veit Systems Design

RE: Thermocouple alternatives

, Inc. sells thermocouple connectors with built-in ferrite cores for EMI suppression; though its probably just easier to grab some of the orphaned ferrites you probably have laying around anyway... Thanks for everyone's input. -Andy Andrew Veit Systems Design Engineer MTS Systems Corp 1001 Sheldon

24 Mo. Warranty for the EU

not found anything yet. Thanks- -Andy Andrew Veit Systems Design Engineer MTS Systems Corp Ph: 919.677.2507 Fax: 919.677.2480 1001 Sheldon Drive Cary, NC 27513 --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc

Re: Hi-Pot OK labels

practice in the industry and not typically an issue? I like the idea because it solves several issues in one step: stickers falling off, visual proof of testing, reducing paperwork, and the chance of a paper record getting misplaced. Thanks- -Andy Andrew Veit Systems Design Engineer MTS Systems Corp

RE: FCC Class A and Class B testing

A and Class B usage. Andy White Ericsson San Diego. -Original Message- From: cecil.gitt...@kodak.com [mailto:cecil.gitt...@kodak.com] Sent: Thursday, October 25, 2001 9:15 AM To: emc-p...@majordomo.ieee.org Subject: FCC Class A and Class B testing From: Cecil A. Gittens I am in process

Ethernet query

? any help would be appreciated Andy Andy White, Senior EMC Engineer, Ericsson Wireless Communications Inc. San Diego, CA 92121 Tel 858 332 6214 / 877 877 7799 ext 26214 Fax 858 332 7311 e-mail andy.wh...@ericsson.com

RE: EMI sniffer goggles

100 years. Sounds like we're just missing something sensitive to the portion of the spectrum between DC and X-rays! ;-) -Andy Andrew Veit Systems Design Engineer MTS Systems Corp Ph: 919.677.2507 Fax: 919.677.2480 1001 Sheldon Drive Cary, NC 27513 -Original Message- From: Doug McKean

RE: FCC - radiated emission up to 10th harmonic

] albeit within the processor and the higher clock (and harmonics thereof) can couple on to the other IO entering/exiting the processor. The possibility of the processor itself being resonant at the higher harmonics also increases. Andy White, Senior EMC

Certificate of Incoorporation???

Hello- Can someone explain to me what a Certificate of Incorporation is? One of our vendors wants to supply this in lieu of an EU Declaration of Conformity for CE compliance. Can someone enlighten me? Thanks again- -Andy Andrew Veit Systems Design Engineer MTS Systems Corp Ph: 919.677.2507 Fax

Cable Drawing Standards

assembly drawings/documentation? I have also been told that workmanship standards exist as well, but I have not been able to locate any yet. Thank you- -Andy Andrew Veit MTS Systems --- This message is from the IEEE EMC Society Product Safety Technical

HP 1664A manual

I hope someone will be kind enough to help me. A while back, someone posted a link to a vendor of used test equipment. The vendor also had an extensive list of test equipment manuals available. In particular, I am looking for manuals for an HP 1664A Logic Analyzer. Thank You- -Andy Andrew

RE: Product Marking - new twist

by OSHA take precedence over whether or not the local authorities accept the NRTL's listing? Thanks- -Andy Andrew Veit Systems Design Engineer MTS Systems Corp Ph: 919.677.2507 Fax: 919.677.2480 1001 Sheldon Drive Cary, NC 27513 -Original Message- From: Rich Nute [mailto:ri

UL 3111-1 vs. UL 3101-1

laboratory equipment and control from the scope. Thus allowing them to efficiently create 3 different standards from the text of one. Thanks again to all those that responded. -Andy Andrew Veit Systems Design Engineer MTS Systems Corp Ph: 919.677.2507 Fax: 919.677.2480 1001 Sheldon Drive Cary, NC 27513

UL 3111-1 vs. UL 3101-1

that UL created the standards 3111-1 and 3101-1 from IEC 1010-1, but there were no further details about how the standards differ. Thank you- -Andy Veit Andrew Veit Systems Design Engineer MTS Systems Corp Ph: 919.677.2507 Fax: 919.677.2480 1001 Sheldon Drive Cary, NC 27513

Date of withdrawal

anyone tell me what Decree 92-767 was? And more importantly, if I can use it as a supporting document for EN 60204-1? My hunch is that I can't, but obviously I need some facts. EN 60204-1:1992 has a date of withdrawal of July 1, 2001 anyway. Thanks in advance- -Andy Andrew Veit Systems Design

Double Retention

of connection. I have not seen this described in the standards I have read or in the archived emails on the RCIC database - where should I look? At this point, I don't even know if this is a UL or a LVD thing. Thanks- -Andy Andrew Veit Systems Design Engineer MTS Systems Corp. Cary, NC

RE: EMC and product safety split?

I dont think we should split Andy Mullan -Original Message- From: Richard A. Schumacher [mailto:schum...@valencia.rsn.hp.com] Sent: 14 March 2000 20:57 To: emc-p...@ieee.org Subject: RE: EMC and product safety split? I vote for splitting them. EMC and safety are different subjects

RE: CISPR 22 equal to EN55022?

dont believe the catalogue andy -Original Message- From: Colgan, Chris [mailto:chris.col...@tagmclarenaudio.com] Sent: 09 July 1999 09:44 To: 'Richard Cass'; 'emc-p...@majordomo.ieee.org' Subject: RE: CISPR 22 equal to EN55022? Hi Rich According the my British Standards catalogue, EN

RE: CISPR 22 equal to EN55022?

Mirko. All resistibility tests were removed from the EN as resistibility does not come under the EMC Directive. You have to buy the EN to see it. Regards.Andy -Original Message- From: Matejic, Mirko [mailto:mmate...@foxboro.com] Sent: 08 July 1999 22:34 To: 'Richard Cass'; 'emc-p

RE: History Class ...

interference to radio services. regards Andy __ Andy White, Consulting EMC Engineer/Staff, Xerox EMC Competency Center, El Segundo, CA e-mail: andy.wh...@cax.usa.xerox.com __ -Original Message- From: John Allen

List Membership.... Ignore if you dont know Joe Dyer....(IS JOE D YER FROM PHOENIX STILL ON THE LIST?)

People.. Sorry to impose, but I used to work with Joe Dyer in Phoenix, when he worked for Motorola. I am headed for Phoenix soon and would love to get in touch, Joe used to post on this list, some time back. Andy Mullan. -Original Message- From: ed.pr...@cubic.com [SMTP:ed.pr

RE: CE+ CE =CE again

Brian. I am a member of the EU Commission EMC Think Tank. The guidelines have not been withdrawn. The SLIM report recommends that the EMC Directive should be aligned with the Guidelines. Regards..Andy Mullan. Motorola ING UK. -- From: Brian Harlowe[SMTP:bharl

Re: EN 61000-3-2 Mandatory Implementation Dates?

...@windermeregroup.com Attachment Converted: D:\my documents\Attachments\EN 61000-3-2 Mandatory Implemen Regards Andy Griffin __ EMiSoft Limited - Test and Assessment Software Solutions Uk Tel+44 (0)468 188244 Uk Fax+44 (0)1793 522214

Re: EN 55022 ITE Class A vs. Class B?

or a different relevant specification is issued then this situation may obviously change ! Regards Andy Griffin __ EMiSoft Limited - Test and Assessment Software Solutions Uk Tel+44 (0)468 188244 Uk Fax+44 (0)1793 522214

RE: EN 61236-1 or EN 61326-1 ? ? ?

-declare to it. Pryor McGinnis c...@prodigy.net mailto:c...@prodigy.net = Regs Andy Griffin

More UK IEE Seminars

23 Feb, Antennas+propagation Web Site http://www.iee.org.uk/Events/e23feb98.htm 24 Feb, Low cost antenna technology http://www.iee.org.uk/Events/e24feb98.htm Regards Andy Griffin __ EMiSoft Limited - Test and Assessment Software

Re: Harmonics Flicker Presentation, 10 Feb, Sunnyvale CA

Sorry that it doesn't include the spoken word but the following provides the overheads shown at the above Harmonics/Flicker meeting:- http://www.emisoft.co.uk/special/harmonics/index.htm Regards Andy Griffin __ EMiSoft Limited - Test

Re: Telecommunication Directive

3787 Ext. 671 Direct:1 616 248 9671 Fax: 1 616 248 0591 e-mail:ndev...@entela.com Regards Andy Griffin EMiSoft Limited - Test and Assessment Software Solutions Uk Tel

Re: On Humour/Humor ! comment

...@world.std.com Subject: On Humour/Humor ! Date: Thursday, January 22, 1998 4:21 AM Andy did a nice spoof on my objections to the abuse of language. It so happens that I am dead serious about the fact that a large portion of the so-called approval problems stem from the abuse of language committed

China contact

I am looking for a contact name, tel number, e-mail, web for EMC certification/regulations in China. Can anyone help? thanks in advance Andy White Senior EMC Engineer NCR FSG Scotland

Foreword looking Humour !

on about a trivial minor point without input to the real issue ? Answer - Have a nice day Regards Andy Griffin EMiSoft Limited - Test and Assessment Software Solutions Uk Tel +44 (0)468 188244 Uk Fax

RE: EN50082-1:1997

still to sell product after 2001-7-1. Note : although the forward of the specification states they have NO legal status as defined by the commission, these will be listed separately in the OJ - so until we see exactly what is written in the OJ it is all supposition ! Regards Andy Griffin

RE: OJ Review Service?

Todd... The email address attached to this email is cjpen@rmplc. This is chris Penny in the UK a freelance consultant. I use his service and find it very good. I used to read all the OJ's. This is much better. Andy Mullan Motorola ISG UK

Re: When does EN61326 take affect?

received further correspondence regarding the date of publication, which now appears will be on 12/97, with the period of transition extending to 12/31/00. Mark Briggs wrote: Andy, Thanks for the notice...do you mean they want a transition period of 3 years (i.e. you can use either EN61326

Re: Where to get Mil-Std

Tom; Try The following site: http://diamond.spawar.navy.mil/specs/wise/wiseup/ Alternately, if 461D and 462 is what you're looking for, they are available on my web page as well. Andy Garcia Lead EMC/Safety Engineer Coulter Corporation E-Mail: argar...@icanect.net Web: http

Re: Which EMC Directive Standards might apply here?

was specific to the EMC Directive, you should also show conformance to the Low Voltage Directive, prior to CE Marking your device, in which case EN 61010-1 would also apply. Andy Garcia Lead EMC Safety Engineer Coulter Corporation emct...@aol.com wrote: Good Day List, I am trying to determine

RE: WHICH EMC STANDARDS MIGHT APPLY HERE?

was specific to the EMC Directive, you should also show conformance to the Low Voltage Directive, prior to CE Marking your device, in which case EN 61010-1 would also apply. Andy Garcia Lead EMC Safety Engineer Coulter Corporation emct...@aol.com wrote: Good Day List, I am trying to determine

Re: Which EMC Directive Standards might apply here?

was specific to the EMC Directive, you should also show conformance to the Low Voltage Directive, prior to CE Marking your device, in which case EN 61010-1 would also apply. Andy Garcia Lead EMC Safety Engineer Coulter Corporation emct...@aol.com wrote: Good Day List, I am trying to determine what

Re: Distance of Measurements

I would just like to point out that the CISPR22 reference which has been quoted ie only class B equipment may be assessed at 3m etc is actually a note in the specification and therefore is for guidance only and has no legal status ? Regards Andy Griffin

Re: EN50147-1:1996 ? MIL-STD-285

-STD-285 standard; Method of attenuation measurements for enclosures, electromagnetic shielding, for electronic test purposes or equivalent. Thanks in advance, Raymond Li Regards Andy Griffin EMiSoft Limited - Test and Assessment

ENVs the last word

Is this the last word on ENVs ! ENVS.DOC Description: MS-Word document Regards Andy Griffin EMiSoft Limited - Test and Assessment Software Solutions Uk Tel +44 (0)468 188244 Uk Fax +44 (0

ENVs

Dear All CENELEC have finally decided to go into print to explain that EN61000-4-3 and EN61000-4-6 should be used instead of their relevant ENVs. Even though (as previously explained) they did not need to do this - least it will clear up any misunderstanding people may have ! Regards Andy

Help On Turkey Safety Req.

. Perhaps requirements for line harmonics or PFC? Any Help would be greatly appreciated. Andy Garcia South Florida Data Services

IEC / EN 61000-4-X

). Mike H. Regards Andy Griffin EMiSoft Limited - Test and Assessment Software Solutions Uk Tel +468 188244 Uk Fax +1793 522214 USA Tel/Fax +408 356 1980 Email agrif

EMI on Color LCD Displays???

will be greatly appreciated. Thank You Andy Garcia Lead EMC Safety Engineer Coulter Corporation. Andy Garcia s...@icanect.net