Re: [PSES] IEC 61000-6-5 vs. IEC 61000-6-2

2024-04-18 Thread Bill Morse
There are also minor differences if the product is installed in a gas-insulated substation, air-insulated substation, or a power station within 61000-6-5. There is a fair amount of EMC standards that might be applicable to a device within a substation depending on the location of installation

Re: [PSES] Immunity test field strength, residential setting

2023-07-27 Thread Bill Morse
Hello All, I am wondering if the 20 V/m level was borrowed from IEEE C37.90.2, which is referenced in UL CCN NRGU for Protective Relays. The IEEE C37.90.x series is one of the industry standards for items associated with protecting and control of the electrical grid. It does not seem quite

RE: Clayton Pauls - Intro to EMC - an error or two? for those tha t have the text

2003-08-08 Thread Bill Morse
I believe that you have to convert everything back from the relatives. Both the conductivity and the permeability then it will work. For 1MHz I calculated 0.261 Bill From: garymcintu...@aol.com [mailto:garymcintu...@aol.com] Sent: Friday, August 08, 2003 10:33 AM To: emc-p...@ieee.org

RE: Sensitivity of PCS phones

2003-04-22 Thread Bill Morse
RSSI for some network certifications very it might be -104dBm for one network while others it can be -98dBm. Some radios will go down to -107dBm. The numbers are measured at the antenna jack of the radio; so antenna gain and other physical parameters effect the overall RSSI. Someone correct me

RE: Help wanted with succinct subject description for non-special ists

2003-03-31 Thread Bill Morse
When the missile launched it struck another aircraft, the pilot was John Mccain, now Senator John McCain. Bill From: Ken Javor [mailto:ken.ja...@emccompliance.com] Sent: Thursday, March 27, 2003 3:37 PM To: boconn...@t-yuden.com; emc-p...@majordomo.ieee.org Subject: Re: Help wanted with

Power pack placement during emissions testing.

2002-12-05 Thread Bill Morse
I am in a discussion and would like to see what the general opinion is. The discuss centers around where to place an external power supply while doing CISPR 22 emissions testing; on the table, on an insulator in close proximity with the ground plane or on the ground plane. The power supply

RE: Frequency Allocations for EU Countries

2002-10-22 Thread Bill Morse
http://www.ero.dk/ -Original Message- From: scott@jci.com [mailto:scott@jci.com] Sent: Tuesday, October 22, 2002 8:53 AM To: emc-p...@majordomo.ieee.org Subject:Frequency Allocations for EU Countries All, I have a question regarding frequency allocations for

RE: Emissions quick test

2002-08-22 Thread Bill Morse
I just might have to try it and add it to the repertoire of troubleshooting techniques. -Original Message- From: Gert Gremmen [mailto:g.grem...@cetest.nl] Sent: Thursday, August 22, 2002 1:06 PM To: Bill Morse; 'Cortland Richmond'; ieee pstc list Subject:RE: Emissions

RE: Emissions quick test

2002-08-22 Thread Bill Morse
] Sent: Wednesday, August 21, 2002 2:37 PM To: Bill Morse; ieee pstc list Subject:RE: Emissions quick test Just a note about telling clocks apart... unless they're phase locked (sometimes even then) a receiver with a BFO can let you distinguish from among clocks only 100's of Hz apart

RE: Emissions quick test

2002-08-21 Thread Bill Morse
Every person working in the EMC field has their own techniques when dealing will emissions issues. Mostly based on past experiences, product type, what tools they have handy or can afford plus the political atmosphere where they work. I am no exception, part of my list of tools include: EMCO

RE: Need copies of specs addressing ISM bands in Europe

2002-08-12 Thread Bill Morse
To: Bill Morse; emc-p...@ieee.org; richwo...@tycoint.com Subject:Re: Need copies of specs addressing ISM bands in Europe Bill, Rich, Just couldn't find out all of what I wanted there. Did find individual country's allocation for ISM bands and that was encouraging. What am I doing wrong

RE: Need copies of specs addressing ISM bands in Europe

2002-08-12 Thread Bill Morse
Try the following URL. http://www.ero.dk/ Technical Staff Senior EMC Engineer William Morse NCE Phone 916.630.2540 FAX916.630.2501 EMAILbill...@verifone.com -Original Message- From: Robert Macy [mailto:m...@california.com] Sent: Monday, August 12, 2002

RE: Forensic Lab

2002-06-07 Thread Bill Morse
If it's close to Texas try Unified Investigation as a forensic lab: Unified Investigations 223 East Greenbrier Lane Dallas TX 75203 214 946-8989 They were both knowledgeable and very professional For a electrical fire investigation consultant for that area try Phil Wagner I was also impressed

RE: Australian TS001 now part of AUS/NZ60950?

2002-05-17 Thread Bill Morse
The Australian ACA TS 001 Safety Requirements for Customer Equipment states that customer equipment shall comply with AS/NZS 3260 From TS 001 AS/NZS 3260 [4] is closely aligned with IEC 950 [6] and has variations to suit Australian conditions You should verify that the test house is testing to

RE: stun guns on aircraft

2002-05-07 Thread Bill Morse
I think he meant that swords are so much better then guns. Norman, Saxon, Moor, Gael, Roman, Aztec, Mayan, Mongol, Greek, English and the French and just about every society I have read about or know seemed taken by force and is defended by force and did quit well before the advent of the gun in